Question about Televison & Video

1 Answer

Code for one for all remote

I have a funai television and I bought a one for all remote I had it programmed at one time but removed the batteries for a long period of time. I lost the instructions and the remote does not turn the tv on or anything so I need help so that I can operate that particular television again

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 129 Answers

Hello, you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)

Many thanks

Posted on Dec 21, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Trying to program a Universal Remote to use on a Emerson TV, have tried 2 different remotes cannot get either to work ??

Try codes for the following brands : funai, symphonic, emerson, white westinghouse. Or utilize code search. Funai has built most emerson branded AV equipment for the last 20 years

Oct 18, 2016 | Emerson Televison & Video

1 Answer

Need tv code for a durabrand tv the remote is urc-3061b00 one for all

Durabrand is made by Funai. So try the Funai codes 171, 179, 180 .

However, the codes for universal remotes are generally limited to those for devices released at least 6 months before the remote was programmed. So if your TV is newer than your remote, then you may need a newer remote. The urc-3061 manual lists a publication date of 1996.

I hope this helps.

Cindy Wells

Jun 18, 2011 | Televison & Video

1 Answer

I have a digital cable box with comcast but cannot get it programmed with my tv using all the sylvania codes i have

Look in the setup manual for the Comcast remote and either try the scan feature for programming or try the Funai codes as most likely the set is made by Funai.

Nov 11, 2009 | Televison & Video

4 Answers

Comcast remote cannot operate Funai/Sylvania LC225SSX tv. Tried all codes, even for all televisions made by Funai. Code search did not work. Comcast tech could not get Comcast remote to work on the Funai...

Currently there are no remotes nor any codes for them that will operate virtually any sylvania tv's. sorry, it's like the only model we have no resource for as of yet. -Comcast Tech

Jul 31, 2009 | Sylvania LC-225SL9 22 in. LCD TV

3 Answers

Durabrand TV stuck on AUX mode

You can program a Comcast remote to work with the TV. Press the "TV" button on the Comcast remote. Then, hold down the "Setup" button until the red light blinks 3 times. Enter a 5 digit code:
These are the Durabrand codes: 10171 10463 10180 10178 11034
The 10171 code worked for my Durabrand DWT1905. Then use the TV/VCR button located beneath the "7" to switch inputs.

Jul 30, 2009 | Durabrand DWT1905 TV

2 Answers

I know TV model # but not remote model #

go to and enter in your model number.

Mar 23, 2009 | Emerson EWL20S5 20 in. EDTV-Ready LCD...

1 Answer

Durabrand Tv need to program universal remote

Your sets were made by a Japanese company named Funai.  No guarantee, but you might try any Sylvania, Emerson, Durabrand, Symphonic, or Funai codes listed.
If none of those work, often has original remotes at inflated prices. 

Sep 29, 2008 | Televison & Video

1 Answer

Gemini Universal Remote - TV and DVD codes

I'm just calling the Funai company and buying a new remote.

Aug 18, 2008 | Gemini 1 Device Universal Television...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

979 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74990 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5297 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides