Question about Canon PIXMA iP4000R InkJet Printer

Open Question

Ink absorber Hello, I have 2 Canon Pixmax 4000s, and never had a problem, when does one know when the ink absorber is full? Thanks

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my canon ip1800 printer still not printing after cleaning the ink absorber, I still get the message ink absorber is full


Shelly, Did you reset printer after cleaning absorber.
Press and hold the "Power" button and reconnect the power cord. When the printer comes on, release the button. Wait five seconds and push the "Power" button again. This resets the printer's internal memory and overrides the "ink absorber full" error code.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

The ink absorber is full Canon Pixma IP1980 IP1880

How to Clean Canon Ink Absorber

iP1800 ink absorber

Apr 07, 2016 | Canon Office Equipment & Supplies

1 Answer

Canon replaced cartriges and keep on saying ink absorber full?


Hello,

You have to reset your waste ink absorber by:

1) Unplug power cord.
2) Press and hold power button.
3) While holding power button, insert back power cord. You will notice that the power button indicator lights up upon inserting power cord.
4) Release power button then start printer.

That will solve your "The waste ink absorber is full" message.

Downside is: you may have to do this frequently if your printer looses power. You will understand what i mean.

A thumbs up! is greatly appreciated. :)

Feb 02, 2010 | Canon PIXMA iP1800 InkJet Photo Printer

2 Answers

Waste ink absorber full



Try this:
Waste Ink Tank Reset

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe
(Wish I was down in your beautiful country!)



I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Jun 24, 2009 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Printer says ''waste Ink absorber is full'' see service center


This is what the manual says: Ink used for cleaning is absorbed in a waste ink absorber placed in the machine. Press [OK] to cancel the error so that you can continue printing. Once the waste ink absorber becomes completely full, printing cannot be done until the waste ink absorber is replaced.
Canon recommends to contact a Canon service representative as soon as possible.

Nov 12, 2008 | Canon PIXMA MP150 All-In-One InkJet...

2 Answers

What does ink absorber full mean on Canon Pixma 1700?


my Canon pixma keeps coming up ink absorber full cannot print

Oct 30, 2008 | Canon PIXMA iP1600 Printer

2 Answers

Waste ink absorber full I get a warning dialogue saying the 'Waste ink absorber is almost full' Press resume to continue. Solution would be appreciated. Many thanks.


Hi there,

Thanks for posting in FixYa.

It may be the problem arised due to installation. Also check the device manager for any flag coming.

You need to go for reinstall the printer.
Let me know if you need further assistance.
Have a Nice day. Dont forget to vote me.

Regards
Ellin

Sep 13, 2008 | Canon PIXMA iP8500 InkJet Photo Printer

2 Answers

Inkjet cartridges


Hello hotstikss

The following are some error messages, if you are getting any of these, then you will have to investigate by reinstalling the cartridge or installing a new one.



E14 The Ink cartridges whose destination are wrong
E15 Ink cartridge is not installed E16 - Ink remaining is unknown
E27 Waste ink absorber full or platen waste ink absorber full
E28 Ink cartridge temperature rise error -
E5-5 The ink cartridges are not installed or a non-supported ink cartridge is installed ,
or the ink cartridges are not installed properly

If this does not sove the problem please let me know.

Thanks

Jun 23, 2008 | Canon PIXMA MP160 All-In-One InkJet...

4 Answers

IP1880 Canon PIXMA showing Ink absorber full


Pixma ip 1880 is full(solution)

1. first unplug power cable and usb cable
2. hold power for 1-2 minutes
3. turn on power
4. your printer should back to normal printing


Mar 07, 2008 | Canon I990 InkJet Photo Printer

5 Answers

Waste ink tank full..error 5B00


Normal 0 false false false MicrosoftInternetExplorer4 st1:*{behavior:url(#ieooui) } /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Waste PAD ink Reseterfor Canon Pixma iP6320D


You need to Remove the ink Cartridge first in order for the code to take effect.
1) Closethe print head cover.
2) While pressing the Stop/Reset button, press the Power button. (Do not release the buttons. TheLED lights in green to indicate that a function is selectable.)
4) While holding the Power button, release the Stop/Reset button. (Do notrelease the Power button.)
5) While holding the Power button, press the Stop/Reset button 2 times,(Canon idle will appear)and then release the Power and Stop/Reset buttons.(Each time the Stop/Reset button is pressed, the LED lights alternately ineither orange or green, starting with 0.
6) When the LED stops blinking and lights in green, press the Stop/Resetbutton 4 times. (Each time the Stop/Reset button is pressed, the LEDlights alternately in either orange or green, starting with orange.)
7) Press the Power button 2 times. ( the '' Canon" appear twice).The LED lights in green, and the selectedfunction is performed. (When the operation completes, the printer returns tothe menu selection mode automatically.)
8) Power off then back on and test.
9) Congrats!!


Prepared By Jeffrey Vicada (EDS- Technical Engineer) Philippines

Dec 03, 2007 | Canon Pixma iP6210D InkJet Photo Printer

Not finding what you are looking for?
Canon PIXMA iP4000R InkJet Printer Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2208 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...