Question about One For All URC4110 Remote Control
I was givin a sanyo dvd/vcr that came with a one for all 4 way master control. it did com with a book but it got torn up by my girlfriends 7 cats. now after i replaced the batteries it now does not work. i remember how to search for codes but the code only works for the vcr part not the dvd player. i was wondering if i could get the codes for it.
Here is a link for your manual
Here is a list of codes.I dont see sanyo on the list so try the code search funtion.
Posted on Dec 16, 2007
Tips for a great answer:
Oct 01, 2012 | Remote Controls
Sep 02, 2012 | Remote Controls
The One For All 3 Device Universal Remote Control is preprogrammed at
the factory to operate an RCA TV, a Toshiba DVD player, and a Motorola
cable box.To control devices other than the default brands,perform the following
steps; otherwise skip this section:
Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
2. On the remote control,press a device key once (i.e., DVD/VCR,
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press DVD/VCR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD/VCR once.After programming
a DVD Combo device, you will be able to control channel
selection, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
3. Press and hold SET until the LED (red light) blinks twice,
then release SET.
Use the Manufacturer's Codes to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
5. Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn't work, try
Searching For Your Code on next page.
NOTE: If the device does not have a POWER key, press PLAY.
6. Repeat steps 1 through 5 for each device you want to control.
Mar 07, 2011 | One For All URC-3021 Remote Control
Sep 13, 2010 | One For All URC-3021 Remote Control
Apr 06, 2010 | RCA RCR311B Remote Control
Jan 12, 2010 | Remote Controls
Nov 10, 2009 | Sanyo Remote Controls
Jun 27, 2008 | Directed 434MHZ Remote Control
Oct 22, 2007 | GE JASRM24912 Remote Control
57 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: