Question about One For All URC-3021 Remote Control

1 Answer

Can't get code to program my memorex dvd

I can't find thd code I need for my memorex dvd?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 259 Answers
Re: can't get code to program my memorex dvd

Here is yor manual
Here are your codes 3021

If you dont see your product try a code search funtion. If this does not work your remote might not support your unit.

Posted on Dec 16, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How do I program my Sony rm adu007 remote to power a memorex DVD player

If the Sony remote control have set-up codes to Memorex DVD player, you can set it up.
Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Pull up older posts.

Aug 24, 2014 | Remote Controls

1 Answer

Urc 3021B00 Codes for Memorex DVP-SR200P

go www. or www.

God bless you

May 11, 2012 | Remote Controls

1 Answer

Need code for Urc-3021 for memorex dvd player

I recommend using the auto-search function to find the code for your Memorex DVD player.

To program your URC-3021 remote control to operate your TV, the remote has a code search function.

To search for a code for your DVD:
  1. On the remote control, press DVD once.
  2. Press and hold SET until the LED blinks twice, then release SET.
  3. Enter 9 - 9 - 1.The LED will blink twice.
  4. Aim the remote control at the the DVD and slowly alternate between pressing POWER and DVD. Stop when the DVD turns off.
  5. To lock in the code, press and hold SET until the LED blinks twice, then release SET.
Hope that helps.

Oct 28, 2009 | One For All URC-3021 Remote Control

1 Answer

I need the code for dvd memorex. Thank you

The codes to control a Memorex dvd player are 221, 223, 225, 226, 227. They fall under the manufacturer name Tevion.

To program your remote follow these steps:

  1. Turn on your DVD.
  2. Press and hold the CODE SEARCH button for at least 3 seconds until the red LED lights up and stays lit.
  3. Press the DVD button on the remote so that the LED blinks once and then remains solid red.
  4. Enter the first set of 3-digit codes from the list. The LED will blink once every keypress. After the 3rd digit, the red LED will turn off indicating that the code was recognized for the device. If the code was not compatible, the LED will flash several times and you need to return to step 2 to try that code again or to try the next code in the list.
  5. After the LED has turned off, aim the remote at the DVD and press ON/OFF. If the device turns off, you have used the correct code and the remote was successfully programed. If the device does not power off, return to step 2 and try again with the next code in the list.

I hope that helps.

Aug 22, 2009 | Innovage Jumbo Remote Control

1 Answer

Need program code and instructions for a memorex DVD player to program my One For All URC-9910 to a Memorex DVD player

The original instructions do not list Memorex as a maker of DVD players.

One forum says it might be DVD 0695, 0831, or 1270, but does not say if that was before or after a code upgrade from One For All.
Search for URC-9910 to find a complete instruction manual.

Also try "SEARCHING FOR YOUR CODE", although tedious, it may work:


1. Turn on the TV and or device to program.
2. On the URC-9910 remote control, press and hold
SET until you see the display change from the
current device and time to [CODE SET].

NOTE: To exit programming at any time, press EXIT once or
allow 30 seconds of inactivity to lapse.

3. Press the DOWN key on the 4-way pad once until you see the display change to [MAN SEARCH].

NOTE: If you go past [MAN SEARCH], press the UP key one or
more times to return to it.

4. Press SELECT once to begin programming.You will
see the display change to the last-selected device
and its code (e.g., VCR and 0035).

5. Press a desired device key once (e.g., DVD).You will
see the display change to the desired device and the
first code in the manual search list (e.g., DVD and

6. Aim the URC-9910 remote control at the device
(e.g., DVD) and press SELECT once.You will see the
LED (red light) blink and the (IR) icon flash
indicating IR codes are being transmitted.

7. If the device (e.g., DVD) turned off, skip to the next
step. If it did not turn off, aim the URC-9910 remote
control at the device (e.g., DVD) and press the UP key
once to advance the manual search to the next code
(e.g., DVD and 0054).Again you will see the LED (red
light) blink and the (IR) icon flash.
Repeat this step as often as needed until you find a
code that turns off the device.

8. To save the working code, press SELECT once.The
display will confirm your entry with [SUCCESS] and
then [EXIT SETUP].

Aug 10, 2009 | One For All URC-9910 LCD Remote Control

1 Answer

Codes for my koss dvd player

I need the numbers for symphonic tv and memorex dvdplayer thank you

Sep 09, 2008 | One For All URC-3021 Remote Control

Not finding what you are looking for?
One For All URC-3021 Remote Control Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top One For All Remote Controls Experts

The Knight
The Knight

Level 3 Expert

66444 Answers

Cindy Wells

Level 3 Expert

4720 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you an One For All Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides