- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
During the boot process you will see on the screen to press a certain key to enter setup Press and hold that key during the boot up process to enter BIOS you can load failsafe defaultsor load optimized defaults ,press escape then press f10 to save to cmos to restart or During the boot process tap thef8 button three times this will boot into safe mode where the only things working will be your mouse and keyboard enabling you to attempt to repair your computer Also you might try Turn Off the computer, now as soon as you hit the power button, keep on holding "Alt" key & keep on tapping "F10 key,ie: Alt+F10, it will open the recovery console ,select full factory restore and follow on screen instruction. (Note:this will erase all datas on the computer) hope this helps
Your question is kind of confusing. From what I get is that your printer is saying to not shut it down by unplugging it or breaker switch? If that's the case simply hold the power button till it shuts down (if it doesn't shut off after 5 seconds release and it should shut down).
If the message is saying do not shut it down at all, try and wait it out. It could be loading drivers or saving data etc etc.
Another problem it that you could have print jobs waiting and shutting down could corrupt data. Try and look at the bottom right of your computer screen and find a printer icon. From there you should be able to right click and disable pending print jobs etc etc.
Windows is so corrupted that it can't shut down properly. The only way to fix that is to save your data and reinstall. And be very careful what program you load after that because it was one of them that has corrupted Vista so load them one at a time with serious testing in between.
re install or repormat your system to fix all problem will return into normal operation... but before that dont forget to save your data if you have important data dont'want to loss it..
if can't open the program or operating system remove your Hdd then insert into another computer to back up the data ot be sure that you have back up all important data. except those programs cant make back up... you need to re install again from the source..
the most simplest way to shut down your laptop is to override your processing by simply holding down the shutdown button until your computer turns off (do this when all your work is saved and the "Windows is shutting down" mode is on your screen).
This idea is not recommended but will always work.
You need to make sure you have updated the PS3 as well as the games. You said you wait until the game is done saving, well just to make sure, check the HDD light isn't flashing (writing information). Also you should not just shut down from the game, quit game then shut down the system. If you are shutting it down with the switch in the back, shut down "softly" (holding down the PS button and selecting shutdown) then turn off in the back.
open control panel then display then click screen saver
then power at bottom of page In there you will find Hibernate and other settings that you can change you can disable able hibernate standby and sleep
Then click apply
restart let me know if this was helpful