I Also have the Aspire 5310 and when you press the bluetooth launch button it says 'No Bluetooth Device', this is becasuse it does not have the Bluetooth card installed into this computer and this is an extra for your laptop... hope this helped.
Hi, Acer Aspire 5100 PC Notebook main problem is Connection Problem, Software Problem etc. For these problem you can visit a link by just Click Here . For any other problem with this Notebook you can Click Here
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
According to the manual, "Located beside the keyboard are application buttons. These buttons are called easy-launch buttons. They are: WLAN, Internet, email, Bluetooth, Arcade and Acer Empowering Technology." Pressing the Bluetooth button should toggle Bluetooth on or off, assuming the correct drivers are installed.
Download the full user manual from Acer here: http://v.gd/eoMupe
Download the bluetooth driver for your OS (Vista and XP supported) by going to this link: http://www.acer.co.uk/ac/en/GB/content/drivers Try to insert a bluetooth device when prompted. Repost and let us know how you got on and if you need more help
When you say when i press the button what button are you pressing
have you slid the bluetooth switch over to the on position on your acer and do you actually have bluetooth on the laptop i have a acer 5630 with the bluetooth switch on the front of the laptop but the laptop dosent even support bluetooth so it crazy having the switch there
Hi there, please follow the instruction.
1. turn off Bluetooth button.
2. run your Acer driver disk & install the Bluetooth
device. After a while your laptop asking you for turn
on your Bluetooth. Press the button of Bluetooth. It
will installing then. After a while another message
will come in front of you that, Bluetooth device
installed & ready for you.
You may also watch the link for some an idea about setup a Bluetooth.
Most of the Acer Models do not have Inbuilt Bluetooth. Usually i would say, use Bluetooth Toggle, rather than Purchasing a kit. A Bluetooth toggle is just like a Pen Drive.You need to install the CD and load the software. Once Loaded, insert the Toggle in the USB of the Computer and synchronize it with other device.
First of all check that you really DO have a BlueTooth unit. Acer uses the same chassis for models with and without Bluetooth, so the button being there doesn't mean necessarily there's something under it.
For example this one 7535G on eBay does not have a BlueTooth.
Check the Bluetooth is active in the BIOS, and if you have a single button model ("one button to rule them all") check the button configuration - there should be an Acer hotkey utility somewhere to do that. Very often, the button is set to control only one device between WiFi, optional internal cell modem, and BlueTooth. Normally that is WiFi. Set it to "Both". This, I repeat, if you DO have a 'single button' device.
Also, check you have the original Acer drivers. I once mis-installed a set of wrong Widcomm drivers without realizing it, and almost went crazy troubleshooting it.
just try to check with drivers, which is provided with the laptop..
if this not help then take it to service station and ask them about the circuit of bluetooth. if it is available then tell them to put appropirate drivers.
cause in many acer model they give an option of bluetooth but there is no bluetooth. they provide u and slot for that. for ur future options
this might solve ur problem
have u install the driver (software) for it?. if yes then look at the taskbar where u see bluetooth icon then right click on it then click on configure or anything setup a wizard will come up for instruction.thats all.
NB u can as well do this from the control panel