Question about Akai MPC-4000 Plus Production Center (w/80 GB Hard Drive&Onboard Sounds)

2 Answers

Mpc 1000 I can not get my pads to work anymore which means i can't load anything either is there a pad lock or something?

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I am not able unhide my folder and files which were hidden for security purpose as i was doing earlier. disk file system is NTFS. disk property shows the disk occupied with some appx 1.3 GB data. how do i unhide the same and get data back?

Posted on Dec 16, 2007

  • neerajay Dec 16, 2007

    i have sony erricson k320i set but the PC suite alongwith for GPRS is compatible for windows XP only and not for Vista Home Basic. Can i have a solution to use through cable the GPRS but on Vista operating system some how

×

Ad

I am not able unhide my folder and files which were hidden for security purpose as i was doing earlier. disk file system is NTFS. disk property shows the disk occupied with some appx 1.3 GB data. how do i unhide the same and get data back?

Posted on Dec 16, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't hear any sounds in my mpc 4000


Have you loaded sounds for the pads from an internal or external storage device? (Such as CD or Internal Hard Drive, if installed) - each time you turn on the power, the programs are cleared so the pads will not make any noise until you load the sounds you want.

Otherwise, it could be related to your speaker setup?

Provide some details on your system setup and whether you are loading programs etc.

Nov 07, 2010 | Akai MPC-4000 Plus Production Center (w/80...

1 Answer

I NEED TO KNOW HOW TO SET UP MY ROLAND JUNO D WITH MY AKAI MPC 1000, PARTICULARLY HOW TO SET UP THE MIDI ON THE ROLAND.


Simple way is MIDI out from Juno to MIDI in on MPC, then (depending on how you want to work), connect MIDI out from MPC to the in on the Juno. If you do this you MUST turn local control off on the Juno or else you'll get double triggers (internal + msg in from MPC). Now to record sequences on MPC , set MIDI to as track in setup window (on the 2500, this is accessed by pressing MODE then pad 9, then press button under the corresponding tab [on LCD]) then set your MIDI channel by port, meaning if your MIDI cable is physically connected to out A, in your LCD in bottom right corner it will show as follows: 1A. This indicates you are transmitting on MIDI channel 1; port A. Remember, MIDI IS NOT AUDIO!!!!! Since the Juno is a synth and not a workstation, all transport controls are handled by the MPC, that's pretty much it... Hope this helps a little, enjoy!

P.S. Go to mpc-forum.com its THE sh**! They also have links for their e-book I have one for the 2500 and its awesome!!!

Aug 16, 2010 | Roland Juno-D

2 Answers

My touchpad on my mpc transport t2200 is not working as a mouse


Also if your ac adapter(powercord)is bad, the touchpad/mouse sometimes will malfunction and become impossible to use or not work at all.Start with checking your ac adapter voltage or try another charger first.

Nov 28, 2009 | MPC Computers TransPort T3000 Notebook

1 Answer

How can the MPC 500 play the Samples on the Pads in real time?


You have to go to the sample edit page and move the start point to the beginning of the wave sample. Right now your start point is before the sample actually starts.

Oct 07, 2009 | Akai MPC-4000 Plus Production Center (w/80...

1 Answer

I can't get my mpc 1000 to play chopped samples on the pads


Have you checked it out from the manual. If you have get in touch with www.akai.com and ask them. they are the manufacturer and YOU ARE THE CUSTOMER.
Good Luck

Jul 05, 2009 | Akai Mpc1000 Sampling Music Production...

1 Answer

Mpc 500


First ensure that you are saving into the right folder, on MPC HD and not into a subfolder, and that files are in correct midi format. Also ensure that connections to MPC are OK.

If connections and saved files are ok, then probably you need to reinstall Mpc 500software onto your computer, using disk provided with your Mpc 500.

Oct 19, 2008 | Akai Mpd16 Midi/USB Mpc-Style Drum Pad...

2 Answers

Akai MPC 4000 Plus


You could set the sample to "one shot" in the trim page or in the Program>KG Mix>Zone page.... it is currently set to "as sample"... i like to use the release to let the sample fade out as long as i like... its a lot diffrent from the old poly mono thing but i like it better overall... hope this is helpfull.

Apr 16, 2008 | Akai MPC-4000 Plus Production Center (w/80...

1 Answer

Paper feed


Yep the paper feed roller wears and will need replacement (open front cover in centre of machine tabs on either side it just clicks out.

should also change sep pad (multi feeds)

Here in LINK to purchase items pic below

67747aa.jpgea6d5df.jpg

Dec 21, 2007 | HP LaserJet 1000 Printer

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Akai Computers & Internet Experts

Marvin
Marvin

Level 3 Expert

82322 Answers

Alun Cox

Level 3 Expert

2678 Answers

richie46

Level 3 Expert

12962 Answers

Are you an Akai Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...