Question about Kenmore 40494 / 40495 / 40499 Electric Single Oven

1 Answer

Kenmore Stove (coils)

My oven isn't working, it was working yesterday, but i had turned it to broil and it didn't come on the top burner. now today the oven isn't working at all but the stove top burners are working, i don;t have an manual for this stove, i was thinking it had something to do with the timer i don't know how to set them, the stove is only 3years old, can you help me?

thanks Nancy Boudreau

Posted by on

  • 4 more comments 
  • naughtynan Jan 09, 2008

    the clock is lit up, heres the num. mod.# C970-590934, ser.#NF02420987

  • naughtynan Jan 09, 2008

    yes the clock is at the right time, i double checked the mod. # and it is correct.

  • naughtynan Jan 09, 2008

    i'm in New Brunswick, Canada, and it is a Kenmore

  • naughtynan Jan 09, 2008

    when i turned on bake it's a separate dial, just the time of day shows on screen, it turned the other dial to 350o and the light didn't show that the oven was on i tried what u suggested it still didn't work. this stove is just an ordinary one , no selfcleaning, just a dial for Bake, Time Bake, Broil and Off, the other is for the tempertures. then the separate dials for top of stove, which is coils.

  • naughtynan Jan 09, 2008

    i think the temperture switch is not working it feels loose, where the other dial have a click to them, but i removed the dial and manually turned the steel rod, but still the light doesn't come on or the oven, my uncle will be here in a few days to help me move the stove to make sure all the cords are ok, and to see if he can fix it, all these tips you gave me where a lot of help, i'm keeping this info for when he comes, it will help him and i just might have to get in touch with you again, thanks for your help

  • Anonymous Mar 24, 2014

    have 2 electric plugs on top of shacklock stove, don't work anymore

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,314 Answers

If the timer is on hit cancel or reset then hit clock and then use up and down arrows to set them also locate the serial plate and give me the mod num will be a buch of num like 106.48062890 around the bottom drawer on the body of the range or around the oven door if the eoc or clock isnt lit go turn the breaker off for 5sec and let me know

Posted on Dec 29, 2007

  • 3 more comments 
  • robert samples Jan 09, 2008

    have you set the clock to the right time is that a Kenmore that model number isn't coming up under kenmore on my data base im trying to find you a manuel

  • robert samples Jan 09, 2008

    and is it a kenmore are you in usa

  • robert samples Jan 09, 2008



    ok im in tenn usa is that a slide range. i believe that's a Frigidaire serial num for a slide in range .two companies build for kenmore Frigidaire and whirlpool and if you hit bake then 350 should come up in the display and pre heat light should come on if display shows (- - -) then hit temp up and let me know what happens

  • robert samples Jan 09, 2008

    well first you need to confirm that you have correct power at the out let and where cord connects to the oven if you have proper power coming in then you either have a bad bake switch or thermostat id look at the bake switch first after confirming power,outlet,and cord the thermostat is the dial with all the numbers

  • robert samples Jan 09, 2008

    i will be here for you just reply will auto e mail me

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bake pre heat isn't working broil and top burners


Hi,

The ignitor is not working right and is going bad....
have the repair man replace the ignitor, or DIY....
Check out this tip about your problem...

Oven not Working or Oven not Heating

Oven Problems Replacing the Igniter


heatman101

Aug 07, 2011 | GE Ovens

1 Answer

I have a kenmore electric stove. The top burner


I have the same problem, it turns out that the clock has a sensor in it to turn on the oven. If that sensor is not working, which is found in the clock, the oven does not work. I had a repair guy come out and it will cost 350.00 to repair. My stove is only six years old. It is only two months to the day off warranty. Apparently a power outage can cause the sensor to go. Hope this helps.

May 12, 2010 | Kenmore 40494 / 40495 / 40499 Electric...

1 Answer

Kenmore stove model# 665.92024100 While cooking


Check and see if the broil element has shorted to ground.

Bonus

Apr 13, 2010 | Kenmore Ovens

1 Answer

Gas stove top works, broiler works, oven does not


is it electronic iginition? are you asking about top burner pilots? if so there are under the top in the middle beteen each side of the burners 1 pilot does burners on right and 1 on left. oven pilots are underneath you have to remove bottom door look in there at back and look up and you'll see it. if its a electronis ignition range you have no pilots!! glow coils and sparkers....

Feb 06, 2010 | Kenmore 30464 / 30465 / 30469 Gas Single...

1 Answer

My oven made a buzzing sound,and and smoke came out form the oven. Now it wont heat up, but the top stove still works...Any ideas? Thanks


fryed switch or fryed burner
if smoke came from inside stove likely the burner is fryed
try setting oven to broil and see if it heats up
if it does replace lower burner

Jul 31, 2009 | Ovens

2 Answers

KENMORE GAS STOVE OVEN LOWER BURNER WON'T WORK


Most likely a hot-surface ignitor has failed. If it doesn't consume enough current, the gas valve won't open. It's usually a fairly easy fix, once you gain access to the ignitor and have a new one to replace it with. Make sure you unplug the range...

Apr 25, 2009 | Ovens

1 Answer

Kenmore gas stove Model 790


It could be that the sensor wire that controls the main gas valve is out of position. It should sit in the pilot light flame.
Look, and adjust if needed.
If it's ok, then you need a replacement main gas safety valve.
This should only be fitted by qualified personnel.
They do give up eventually after years of heating, and fail safe.

Dec 31, 2008 | Kenmore 40494 / 40495 / 40499 Electric...

1 Answer

Bake and Broil not working


After you hit the function you want...bake or broil...click the up arrow.  That should give you the default temp of 350 and the unit should light.  Now adjust to the temp you want.

Nov 28, 2008 | Ovens

1 Answer

Bake and Broil not working


Product manuals
Product manuals are available for most in-stock items.
Order a product manual by calling 1-800-366-PART (1-800-366-7278). Or download a free product manual at ManageMyHome.com.

Aug 01, 2008 | Kenmore 33169 Gas Single Oven

Not finding what you are looking for?
Kenmore 40494 / 40495 / 40499 Electric Single Oven Logo

464 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Ovens Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Brad Brown

Level 3 Expert

17102 Answers

Are you a Kenmore Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...