- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
have you moved? make sure you're paying for caller id from the phone co., neither phone id works?. sometimes after a lightning storm or a power surge it can mess up cordless phones. unplug the ac from the base and take the batteries out of the handset, replace the batteries and plug ac back in. do you get caller id on any other phone/? sometimes they just quit
Did you fully charge your phone? - Make sure you fully charge for 16-24 hours .
Is the battery old? - Replace the battery.
Is the electrical outlet switch turned on? - If you are using AC (electrical) power, make sure that the unit is connected to a non-switched electrical outlet.
Are the connecting wires tight - Unplug the AC power converter from the unit and plug it back in.
Do you have CallerID service with your telephone company - In order to receive CallerID records, you must subscribe to the standard name and number CallerID service available through your local telephone company. If the CallerID works for normal calls but not on Call waiting calls, then you must contact your phone company to get the combined CID/CW service.
CallerID shows up after second ring - Be sure to wait until the second ring before answering. CallerID signals comes through after the first ring, if caller pick ups phone too soon CallerID signal will not be transmitted to the handset.
Confirm that callerID is still working on that particular line by checking another phone on the same line - If CallerID is not coming through contact your phone company provider.
If this does not fix your problem, contact your authorized Service Center.*
Thanks for using FixYa. I think you have stored more than 100 Caller ID messages and hence the caller ID is not showing on Uniden Tru8888.In the following cases the caller ID will not be shown-
If you answer a call before the Caller ID message is received (for example, before the second ring), the Caller ID message will not appear.
When the call is received via a telephone company that does not offer Caller ID service, the caller’s phone number and name does not appear. (This includes some international calls.)
When the call is via a private branch exchange (PBX), the caller's phone number and name may not appear.
You may receive any one of the following messages:
When a private name is received; Private Name
When a private number is received; Private Number
When a unknown name is received; Unknown Name
When a unknown number is received; Unknown Number
When invalid data is received; Incomplete Data
The Caller ID list stores information for incoming calls - even unanswered calls. You can store up to 100 Caller ID messages and phonebook entries (including Speed Dials) for each handset and the base. You can view the Caller ID list through the handset or base during a call or when the phone is in standby mode.
Memory locations for Caller ID messages and Phonebook entries (including Speed Dials) are common, you can store up to all 100 entries for each handset and the base. Caller ID messages are not stored when you have 100 phonebook entries. When you have stored a total of 100 phonebook entries and Caller ID messages, the oldest Caller ID message is overwritten.
Please do rate the solution and revert for further assistance.
just connect one end of the phone plug to the id caller,then connect the outlet of the caller id and fix it to phone...........even then if u hav problem, may be ur caller id doesn.t hav batteries..............otherwise u may hav some problem in the id caller socket where phone plugs r inserted................
How to get the caller ID to work on the additional GE DECT phone handsets. You must follow these steps in the exact order :
#1 - unplug the base phone
#2 - unplug the telephone line from the base phone
#3 - remove the battery packs from the phones
#4 - wait 10 minutes. reverse the order when assembling. Put battery packs in phones, put the telephone line back in the base phone and lastly plug all phones back in.
It takes about another 10 minutes after that before all phone handsets start recognizing caller ID.