Question about Roper RAS8445KQ Top Load Washer

1 Answer

Wahing mahine will not run on cold cycle and wil not spin

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 196 Answers
Re: wahing mahine

Suspect water valve is faulty and possible a faulty lid switch.

Posted on Jan 12, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have a 2 month old Speed Queen top load (542) after the spin cycle, the clothes are still very wet

i assume the majority of the water is being pumped from the machine? if the clothes are very wet check your "fabric Select" setting and ensure you are not wahing on delecate handwash or wool wash (knits) setting, in this setting there will be a very slow or no, spin so the clothes will not stretch and have to be laid out to dry this is normal. if you are on a Permpress or regular setting the spin should be faster, also check your cycle selection is for Regular or permpress and spin is not missed .

I hope this was useful

Feb 15, 2013 | Speed Queen AWS52NW Top Load Washer

1 Answer

Fisher Paykel washer spin issue

lift the front of the machine and set on blocks about 3"

reach under to back to the blak flexable pipe and squeeze several times to loosen hair soap gunk eccetera.

start mahine on rinse cyle

it should start to drain on its own

Jul 18, 2010 | Fisher Paykel EcoSmart GWL15

1 Answer

Cold water knob is not working

Check the screen on the cold valve. If power is getting to the valve and the screens are clean then the coil is bad. Check continuity if you have a meter.

Jul 01, 2009 | Washing Machines

1 Answer

Cold water pours in during final spin

No - the timer is the likely suspect.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Jan 15, 2009 | Kenmore 98702 Stacked Washer/Dryer

1 Answer

Cold water pours in during final spin

There is something clogging your pump, dismantle it to clear it. Plug off the wall socket mains first.

Jan 15, 2009 | GE WDSR2080D Top Load Washer

1 Answer

How do I get the soap dispenser out to clean. I have a Diplomat intergrated wahing mahine bought at MFI model APM8452

as you pull the dispenser, there are plastics that would prevent it from coming out, press these two plastics downwards and you can pull the dispenser out.

tnx 4 using fixya,


Oct 09, 2008 | Washing Machines

Not finding what you are looking for?
Roper RAS8445KQ Top Load Washer Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Roper Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Roper Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides