Question about Belkin (F5D9230-4) Wireless Router (F5D92304)
I have a feeling I might be able to find the router setup information if you can tell me the correct answer to the prompts needing answered by this link
Virgin Media Broadband Help
The model number of the Belkin router may be of interest if detailed configuration instructions are required and because there is the a report of an issue with a specific belkin router model on the Virgin Media site that appears to require a firmware update to work well with that particular internet service.
Posted on Dec 14, 2007
Tips for a great answer:
Jan 15, 2011 | NetGear Routers
Jan 15, 2011 | D-Link DIR-615 Wireless Router
Dec 31, 2010 | D-Link AirPlus DI-524 Wireless Router
Dec 29, 2010 | D-Link DIR-615 Wireless Router
Dec 24, 2010 | D-Link DI-524 High Speed 2.4GHz (802.11g)...
Dec 08, 2010 | D-Link AirPlus DI-524 Wireless Router
Ok. As per your statement your laptop is working
perfectly , when you are connected your laptop with with the cable wire.So the
network cable is OK. So you have to configured the wireless cable in your laptop when it is connected to your laptop. After
connecting the cable wire to your laptop you have to findout the gate way of
your ISP ( Internet Service Provider). To find out the gate way , kindly follow
the following instructions.
First findout the IP address , subnet
mask,and Gateway addresses of your ISP ( InternetService Provider ).To find out
the above mentionedaddresses first open the control
panel -> network connections -> local
area connction -> properties -> Internet Protocol Version 4(TCP/IPV4) OR Internet
Protocol Version 6 (TCP/IPV6)according to your ISP -> Properties
By the systematic selection as mentioned above you will get the IP
address, subnet mask and Gateway addresses. Kindly note the Gate way address of
your ISP. Then enter the gateway address in the browser and open the window. Then
a control panel / a window will appear. It will prompt you to enter 1). user
name, and 2) password. If you are having the user name and passwords provided
by your ISP , kindly enter them in the window and click to open. Then the
particulars of your ISP will be displayed in the window. Then click the wireless
icon and click to enable. Hurray ! your laptop will work perfectly through
wireless. If you are not aware of about the 1). User name and 2). password ,
you must approached to your ISP and try obtain the same for working of your
laptop wirelessly. Provided , that you have to configure the wireless enabling for both the ethernet cables and there after save the changes , after finding the 'GATEWAYS' if both the the ISP's seperately.
Oct 03, 2010 | D-Link DI 514 Wireless Router (DI-514)
Jun 19, 2010 | NetGear WGR614 54Mbps Wireless Router...
Mar 30, 2010 | NetGear DG834G Router
Jan 17, 2008 | D-Link DI-704P Router
166 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: