Question about Epson CX8400 All-In-One InkJet Printer

2 Answers

ABOUT THE CX8400 EPSON WHAT IS MY PROBLEM I NEED HELP

JUST BOUGHT THE CX 8400 LAST WK. NEW AND AM USING A MAC G4 POWER BK OS TIGER 10.4 AND FOR THE LIFE OF ME I CANNOT GET IT TO PRINT FROM THE COMPUTER

Posted by on

  • Anonymous Feb 10, 2008

    either prints gibberish (code?) or just shoots paper thru...endless paper and I cannot cancel the print job from the printer or the computer.  Loaded the new drivers...no change...also, the Epson manual says to go to Page Setup from the File menu...there is no page setup under the file menu...go figure.

  • Anonymous Mar 22, 2008

    ONCE THE PRINTER STARTS PRINTING ITS VERY DIFFICULT TO STOP THE PRINTER FROM PRINTING. IT ALSO PRINTS A ONE PAGE MESSAGE ON TWO PAGES.

×

Ad

2 Answers

Make sure that in all page set up or printer set up boxes say US letter NOT sheetfeed borderless. This seems to be a default that it picks.

Posted on May 04, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Same problem. just bought the cx8400 today. I'm running the imac 10.5. It's feeding endless amounts of paper and can't cancel the job. Please let me know if you've found a solution. NO FRIGGEN PAGE SET UP option.!!!!

Posted on Mar 05, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mac OS X Version 10 4 (Tiger) install disk download


I have one. or you can send me your drive and I will do it for you for free. I need os X 10.5 full version for a G4 quicksilver 933

May 17, 2014 | Computers & Internet

1 Answer

I HAVE AN APPLE POWERBOOK G4 I PURCHASE FROM EBAY IT IS CURRENTLY RUNNING MAC OS 9 ,HOW CAN I UPGRADE TO OSX 10 ?


Hi Bobby
You will need to get an OS X installation DVD. Try eBay.Don't go for anything lower than 10.4 (Tiger)10.5 (Leopard) and 10.6 (Snow Leopard) should run fine on this machine.Don't bother with 10.7 or 10.8

Jan 05, 2013 | Apple PowerBook G4 Mac Notebook

1 Answer

Trouble downloading songs from G-3 I phone to powerbook g4


font.f1 {font: 12.0px Helvetica} Thanks for asking your question with Fixya Support. I will be glad to assist you.

If you are experiencing issues with downloading songs from iPhone 3G to your Powerbook G4, there are a few steps you need to check:
Make sure your Mac OS X operating system version is up to date. The most current updates for the current 3 most common Mac OS systems out today: Mac OS X 10.4 Tiger: Mac OS X 10.4.11 (Current version) Mac OS X 10.5 Leopard: Mac OS X 10.5.8 (Current version) Mac OS X 10.6 Snow Leopard: Mac OS X 10.6.6 (Current version)
If your present version of Mac OS X does not match the current version update listed above for your system, then click on the Apple menu icon in the upper left corner of your screen and select "About this Mac" to verify. • Then close that window and click on the Apple menu icon once again and select Software Updates andrun the updates.
• Once your Mac OS X has been updated to the most current version, then you will need to visit the link below, then download and install the current version iTunes Link: Download iTunes 10 for Mac (for 10.5 Leopard or higher) Link: Download iTunes 9.2.1 for Mac (for Mac OS X 10.4 Tiger or earlier)
• When you have the current version of iTunes on your Powerbook, then commence to connect your iPhone 3G with your Powerbook and sync your iPhone with iTunes.
I am providing these initial steps to you, due to the limited information I have from you regarding your technical issue, but will be glad to assist you further, if you are unable to resolve your issue with these provided steps.
I hope this helps.
Regards,
-Mactectrainer

Jan 30, 2011 | Apple Powerbook G4 15" 1.5GHz SuperDrive...

1 Answer

I have an old G4 Mac Laptop I want to start using again, no recovery CD and need to reset the username and password because I can't remember them


I do not think there is any shortcut or hack to recover the password. You will need an installer disk, preferably one that has the same OS version as your G4. Tiger is your best option, OS 10.4. The newer Leopard OS 10.5 has a lot of code for Intel based processors rather than the PowerPC. If the G4 has 10.4 installed as far as you remember, you can try these tips:
macoxtips.com

Dec 30, 2009 | Apple 15" PowerBook G4 Aluminum 1.67 GHz...

1 Answer

Computer keeps saying "paper out" or "not loaded properly"


disconnect the printer from the computer
do a manual paper feed
if it can feed paper, replace usb cable or try another usb port

May 14, 2009 | Epson CX8400 All-In-One InkJet Printer

1 Answer

Epson cx 8400


Start, Click Printers & Faxes. Right Click EPSON CX 8400.. Find & Click Printing Preferences. Select the Paper Size (Choose what printing size you want). GOOD LUCK!

Pls! Don't forget to rate me.

Mar 04, 2009 | Epson CX8400 All-In-One InkJet Printer

1 Answer

Epson cx8400 Black Ink Cartridge doesn't work on Printing


I put alcohol in inside the printer, where you insert the ink cartruges then cleaned with paper towl and it works for me.....

Dec 21, 2008 | Epson Stylus CX4800 All-In-One InkJet...

1 Answer

My printer


If you're using a MAC System

> Delete the printer in the printer list ( make sure that there's no printer left in the printer list for the CX 8400 )
> Click on the plus sign to add the printer again in the printer list
in the Printer Brouser window you should see the printer listed there via USB connection., Click on it and check under
"Print Using" if the CX8400 driver is listed ( not a guten print driver )

> If CX8400 driver is listed under Print Using., click on add and try to print.

> If "guten print driver" or no driver selected you may need to uninstall the printer driver and download a driver from the epson website.

Steps to uninstall the printer driver:
1.) Make sure that the printer is deleted from the printer list
2.) Click and open MAC or Apple HD / Library / Printer., and look for the Epson folder (drag the whole Epson Folder to your trash bin)
3.) Click and open MAC or Apple HD / Library / Receipts., and look for "Epson Printer driver package or Epson Printer driver.pkg and drag it toyur trash..
4.) disconnect the connection from your Computer to Printer (USB)
5.) Empty your trash bin and restart your computer

Steps to download printer driver:
1.) Download Printer Driver Ver 3.88 epson12439.dmg

try this link > http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid=90342&prodoid=63069506&infoType=Downloads&platform=Macintosh

2.) Ones it is downladed to your desktop click and open the file or click on the "Vise X Installer" / Install and then quit
3.) Connect the printer to your computer (USB)
4.) Click on the Apple Icon / System Preferences / Print and Fax.,
Click on the plus sign to add the printer and print

Jun 27, 2008 | Epson CX8400 All-In-One InkJet Printer

Not finding what you are looking for?
Epson CX8400 All-In-One InkJet Printer Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Alun Cox

Level 3 Expert

2678 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...