Question about Sylvania 6632LG 32 in. LCD HDTV

1 Answer

No power we moved the tv, but carefully. now the tv will not power on at all. any ideas? thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers
Re: no power

Since the only thing you did was move the tv i would say you have a loose solder connection inside the set. you can unplug everything from the tv and unplug it from the wall for a couple of hours. see if that helps

Posted on Jan 02, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Why did it stop working?

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.

Sep 24, 2015 | Panasonic TC-P50X1 50 in. Plasma HDTV

1 Answer

I have a 26mf231 Magnavox 26 inch tv. The screen on the tv just flashes over and over. Never powers up. I took out the power board and all the capacitors look good. Thanks in advance

How many times this standby/power light blinks at one time switch ON? Count it carefully. These blinks are fault indication, and known as blinking codes. From the number of blinks occur at one time switch ON; you can get an idea about the faulty circuit stage inside the TV. This will make repair easy. For more information, check the link

Nov 30, 2013 | Philips 26MF231D 26 in. LCD Television

1 Answer

Hi! I have a 32" LCD led backlit bush tv (not sure

Yes, all the issues point to a problem in the standby power supply which runs 7/24 if the set is plugged into wall power--get it taken care of under warranty before it really fails bad.

Dec 17, 2012 | Flat Panel Televisions

1 Answer

I've owned for approx 3 yrs. Today I was watching a show on my Panasonic TH-50PZ80U and all the sudden the sound went away. From the lowest volume setting to the highest, no noise at all...Please...

First move: unplug your broadcast provider's box, wait for a minute, then plug it back into power source. I mean: leave all the connections intact, just unplug from power source. It might be just power cord or power adapter. If that's not the case, please do the same with TV. Unplug it from wall outlet, wait a minute, plug it back in. It's a next step, if your "box" won't take care of the problem. If that won't take care of the issue, refer to owner's manual for "reset" procedure. Worst case scenario: you might need to replace main board inside or your TV.
good luck,

Oct 09, 2011 | Panasonic Viera TH-50PZ80U Plasma TV

1 Answer

How do I clean the television sxreen?

See the instruction below for better care and cleaning of your LCD TV screen.

CAUTION If you expect to leave your TV dormant for a long time(such as a vacation), it's a good idea to unplug the power cord to protect againstpossible damage from lightning or power surges.

May 13, 2011 | LG 42LC2D 42 in. LCD HDTV

1 Answer

Hello my name is chris. i recently moved into a friends house and i transported my tv to his house. lg sl80. well when i get in there i plug it in and the red power light doesnt come on. any suggestions on...

Hello Chris.
I would double check the power lead (and fuse if in UK).
Check also the socket is working or try another power socket.


Please dont forget to vote if you liked my answer



Feb 12, 2011 | LG 47SL8000 47 in. HDTV-Ready LED TV

2 Answers

The TV no longer works. The red power light on the TV no longer shines as it did when the TV was off. Any idea what the problem might be and if it is worth repairing? The TV is only 5 months old.

D10 is shorted. HER304 in middle of Power supply board near large electrolytic cap. Replace with Radio Shack 276-1144 3A 400PIV Diode. PLEASE BE CAREFUL WITH HIGH VOLTAGE PRESENT ON POWER SUPPLY BOARD. UNPLUG POWER CORD!!! OBSERVE PROPER POLARITY WHEN REPLACING DIODE-LOOK WHERE THE BAND IS.

PS- I just fixed this same problem this morning on same model.

Jul 30, 2009 | Memorex MLTD2622 26 in. LCD TV

1 Answer

Need Power Supply

usually Lcd tv rated 12volts 3 ampers
but be careful.. check the polarity of ur lcd before plugging it.... some power supply has different polarity. good luck..

Feb 12, 2008 | Niko OTP-2011R 20 in. LCD EDTV

Not finding what you are looking for?
Sylvania 6632LG 32 in. LCD HDTV Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sylvania Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

66499 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

Justin Peters

Level 3 Expert

225 Answers

Are you a Sylvania Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides