Question about Toshiba WRC-1000 Router (PA3227C1ETC)

1 Answer

Getting to the admin page on a Toshiba WRC-1000 wireless router

I want to access the settings page on my WRC-1000. Ipconfig shows the default gateway as 192.168.10.1, but when I enter this in IE it says the page cannot be displayed. I'm sure this is the correct IP no. All cables are OK and the router works, I can get on the internet. I want to sell it as I'm on Sky broadband now which has a Netgear router included, so I need to reset the password back to a more "default" value. How do I get to the settings page?

Thanks!

les5335@sky.com

Posted by on

  • les5335 Feb 03, 2008

    Thanks DG. The reset switch was the answer, but it was nowhere near where it was shown in the manual!. I had to literally take the case apart and the switch was actually on the circuit board. it could not be pressed from "outside". Having pressed it, all values returned to default and I was able to access the config page.

    Thanks,



    Les

  • Anonymous Mar 20, 2014

    I can't logon to the config page for the C1000a router, the default loginand password don't work.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 79 Answers

If that is the DG, then it should get you to the Web Config Tool. But... These devices sometimes come out of the factory with the Web Config Interface turned OFF, so the best you will be able to do is to either Telnet to it, or find the reset switch, which will reset it to the factory default configuration... If you are going to sell it, I would just reset it myself...

From the looks of the features included with this, the reset switch is on the back panel.. Once it is reset, you may even be able to get to the Web Interface again...

DG

Posted on Dec 14, 2007

  • William Pecht
    William Pecht Feb 03, 2008

    Wow, LOL, eh? Glad you got it resolved!

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Belkin N1 Wireless ADSL2 Model # F5D8631-4 Router router default address (192.168.2.1) is not opening, even i have reset the router


Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default admin password.
You can now configure the wireless settings to protect your wireless network and Internet from unauthorized access. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Dec 09, 2012 | Belkin Computers & Internet

1 Answer

I lost the passwork for my Toshiba router Model No. PA3227u-1etc


You can reset the factory defaults, then login using the original username and password.

To reset the Wireless Routing Center to factory defaults, insert a straightened paper clip into the Load Default hole on the back of the router to press the button. Keep pressing and turn the Wireless Routing Center off and on. Wait for at least five seconds before you release the button. Then wait for the Wireless Routing Center to finish booting.

By default, the user name is admin and the password is password.

Jun 06, 2010 | Toshiba WRC-1000 Router (PA3227C1ETC)

2 Answers

How do you get to the router configuration web page to change the MTU settings?


Connect your router to 1 computer withethernet cable.
Then access it with defaults link
http://192.168.1.1
or
http://192.168.0.1
enter user name as "admin" and password as "admin" or blank or "password"
then you can configure your router.
If you need more assistanse let me know.
Thanks.

Aug 24, 2009 | Toshiba WRC 1000 Wireless...

1 Answer

ROUTER CONFIGURATION


hook computer up to router with the eithernet cable first, then in internet address bar, type 192.168.1.1
Then this will bring you to your router configuration page.
If it does ask you for username and password and you have not set it up yet, then try using
Username: admin
Pass: admin

Jul 27, 2009 | Toshiba WRC-1000 Router (PA3227C1ETC)

2 Answers

I needto know the ip adress to get into the log in the page and it is for a toshiba router


hi there, try one of these... 192.168.10.1 - 192.168.0.1 - 192.168.1.1 - 192.168.2.1 Think the first one is yours... manual is here...http://209.167.114.38/support/Download/files_Downloads/Index/WirelessProducts/wrc1000en.htm

hope this helps

Dec 15, 2008 | Toshiba WRC 1000 Wireless...

1 Answer

Unable to connect internet


hi,

theres a possiblity that the modem is set to bridge mode,in that way,you will not be able to connect to the internet direclty to the modem,192.168.1.1 is usually the deault gatewayy address for almost all verizon modem and username is admin and password is admin as well,if admin didnt take for the password,try using password as the password


thanks and God Bless

Dec 10, 2008 | Toshiba WRC 1000 Wireless...

1 Answer

I need to set a password for a toshiba wireless router


OPen webinterface of your router (opening address can be found on booklet) Then found a security option there and Provide a WEP key there...
n save the setings.
hope it will work,,,

Nov 16, 2008 | Toshiba ACCESS POINT HOTSPOT-WRC 1000 hs...

1 Answer

Toshiba WRC 1000 as a Wireless bridge


lets get the picture right. laptop connects to a wireless router. then u want to plug into laptop ethernet wan port of linksys ? you have to set router manual settings to gateway which is ip of toshiba... this is a fun topic. ive connected xbox360 to laptop this way.. never tried router. "fun times ahead!"

Oct 10, 2008 | Toshiba WRC 1000 Wireless...

2 Answers

D-link wireless router


You can forget about the cd. You can access the configuration page of your router. Open your DOS PROMPT, type ipconfig then click enter. You will see there ip address and default gateway. The default gateway is in this form(192.168.x.x).Example:192.168.0.1

If you already know the default gateway, open your browser and type the 192.168.0.1 on the address field, it will take you to the router configuration page. You can then set your wireless security.

Good Day

Mar 11, 2008 | D-Link Wireless

Not finding what you are looking for?
Toshiba WRC-1000 Router (PA3227C1ETC) Logo

667 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

pankaj rautela
pankaj rautela

Level 3 Expert

1252 Answers

Are you a Toshiba Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...