Question about Epson Stylus CX4200 All-In-One InkJet Printer
Very suddenly my CX4200 scanner began to show an inch-wide, vertical, grainy block along one margin of scanned image. It appears to be an area of non-sensitivity or else of scrambled, moire-like data capture. This is not a printer issue as the block appears in the scan preview.
Try to clean the scanner glass with a dry cloth...
Try scanning afterwards...if the same issue occurs...
Try to uninstall and reinstall the scanner from your computer..
If you have windows...
Go to add or remove programs and uninstall "epson scan"
Posted on Apr 10, 2008
SOURCE: Epson CX4200 scanner
1) In the program you are working from, begin the scanning process. If working in FULL AUTO MODE as the scan begins click PAUSE or CANCEL, then change "Full Auto Mode" to "Home Mode".
2) You will now see all Epson Scan settings displayed. If the scanner has not previewed automatically, click the large preview button to get a visual of what is on the scanner.
3) Ensure the settings on the Epson Scan are correct for what you wish to scan.
Posted on Aug 23, 2008
SOURCE: scanner error on PC says
Try and open MS Word and import a picture into a document via scan, follow the prompts in Word and it should work fine. If you don,t have MS Word you can download a completely compatible application at Open Office.org. It also has the same functionality is free and allows you to save documents as .doc, .xls, etc. Sometimes a scanner requires additional software or drivers in addition to functioning as a printer. I have found scanning internal to an application a workaround or test for the scanner. If this works I would review the installation or contact the manufacturer or website. Or post and we can give it another try.
Posted on Jun 04, 2009
The HP Scanjet IIP scanners are supported in Windows XP and the drivers included on windows XP CD.
If you can’t manage download it from Windows XP operating system please try to update your Operating system then try again.
All the best.
1. Try going to the bottom of any word document.
2. Click on the language tab (will show current language, eg. "German").
3. Select the desired language (eg. "English (U.K.)"). The select the "Default" button (to make it the default language for every future document).
You can also check this link to get detailed information.
Make sure the document lies perfectly straight on the document table.
If you're printing on glossy paper, prints may be scratched if not handled properly. Don't place objects on top of your prints, and be careful not to scratch them with your fingernails. For best results, frame your prints under glass.
A moiré is a cross-hatch pattern that may appear in a scanned image of a printed document. It is caused by interference from the differing pitches in the scanner's screen and the halftone screen in your original.
You can also check this link (manual) to get detailed information.
I hope it helps.
If you would like to vote for the answer, this will help the others to see the similar problems solved and also will be a satisfaction factor for me to continue helping you.
All the best.
Posted on Mar 27, 2010
Tips for a great answer:
May 03, 2014 | Epson Stylus CX4200 All-In-One InkJet...
Jun 09, 2010 | HP Photosmart C4280 Aio Printer
Feb 27, 2010 | Epson Stylus CX4200 All-In-One InkJet...
Jun 15, 2009 | Kodak ESP 3 Multifunction Printer/ Copier/...
Feb 27, 2009 | Lexmark Pro X125 All-In-One InkJet Printer
Jul 14, 2008 | HP OfficeJet 7310 All-In-One InkJet...
Jul 10, 2008 | Epson Stylus CX4200 All-In-One InkJet...
Jun 01, 2008 | HP OfficeJet 6310 All-in-One Printer...
May 25, 2008 | Printers & Copiers
43 people viewed this question
Usually answered in minutes!