Question about Motorola Mobility Bluetooth Headset-Silver/Black Headset

4 Answers

Motorola h700c i have a mrh700c i have used this headset with my phone(lg ax380 the wave)and it was working fine.i did not use it for a couple of days and now it won't work.i have tried to pair it but it just will not work.can you please help me figure out what to do?

Posted by on

  • 12 more comments 
  • prayinghard1 Dec 21, 2007

    Thank You so much for your help NamLong.I have been trying to get this thing to work forever.your suggestion worked.i'm glad i didn't throw it away like i started to.once again i say thank you

  • Anonymous Feb 22, 2008

    Connection successful only one time

  • jossready Mar 10, 2008

    my h700paired well with my iphone and used to work fine but not anymore. i can paired with the iphone but cant hear anything. how do i reset it?

  • BarbDeC Mar 18, 2008

    My H700 was working perfect for months and then one day when I flipped the boom it didn't connect with my phone. I thought perhaps the charge was low so I recharged it, but nothing. I then tried re-pairing it with my phone (Blackberry i7100) but still nothing. I deleted the device from my phone and tried to reinstall but the phone does not find the device in order to pair. The purple light only turns on for a couple of seconds, and then it shuts off. HELP!!!!!! Thank You

  • Zipperneck Apr 08, 2008

    My H700C worked fine for about 2 months, then one mornig I went to turn it on and instead of saying it was connected, it keeps saying it is now disconnected. I am using it along with my LG9800 (Envy). I have removed the device from my phone and reinstalled it but still does not work. It will pair up but as soon as it does it will say it is now disconnected. Any ideas? Scott

  • Hunkerdown Apr 09, 2008

    My bluethooth will not connect to my At&T Tilt. It worked one time and hasn't worked again. I've tried to pair it again and it say everything is ok and still doesn't work. Help

  • spizod Apr 11, 2008

    can go all the way through menu-connection-bluetooth linksetup-on-back-handsfree-select-look for devices- H700c -bond with bluetooth-ID-ok- searcing for bluetooth and it stays stuck here!

  • RealCorky1 Apr 11, 2008

    I have a Motorola Bluetooth H700C headset that was working great with my Blackberry 7100i. The other day when traveling the H700C was beeping as if I was going in and out of cell ranges. Then when I tried to use it, it appeared to be me paired. I turned both the phone and head set off and on (no change). I deleted the H700C from my cell and tried adding again (pairing) but only finds an "audio device" so the pairing doesn't work. I tried the recommendation on this site (with boom closed,press call button until steady purple light comes on) and then try to pair...still only get "audio device" and no success. Any ideas?

  • Anonymous Apr 13, 2008

    JUNK MOTOROLA IT SHOULD BE SIMPLE, BUT NOT;

  • dirtpuller May 15, 2008

    I had been using my Motorola H700C for several days with my new Treo 700 phone with no problems. Then, one day it just quit working. I've deleted my Bluetooth partnership and re-established it to try to correct the problem, but it still does not work.

  • DrJames Perkins Jun 22, 2008

    I had been using my Motorola H700C for several days with my new Treo 755p phone with no problems. Then, one day it just quit working. I've deleted my Bluetooth trusted device and re-established it to try to correct the problem, but it still does not work all of the time.

  • carlstrom Jul 22, 2008

    The Motorola H700C worked fine with my Treo 650 for about three weeks.
    It still works with my PS3. However although it is paired with the
    Treo, it no longer works as a headset. If I repair, it still does not
    work. The Treo shows a last connected time of the time of pairing.

  • debranni Aug 15, 2008

    I'm trying to pair my H700C with my brand new blackberry curve, but I can't find the instructions to the headset. I figured it was easy, but the blackberry just does't find hte headset. Help.

  • Flexi Flo Jan 10, 2009

    my head piece stop working and now it is asking for a code that I don't anymore, what do I do.

×

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hold the mutifunction button with the mouth piece close, until it turn purple, then open the mouth piece so that it will stay in the pairing mode. Now go ahead and have your phone or blackberry search for H700c
Good luck

Posted on Dec 20, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Hold the mutifunction button with the mouth piece close, until it turn purple, then open the mouth piece so that it will stay in the pairing mode. Now go ahead and have your phone or blackberry search for H700c (NamLong)

The passcode is 0000 according to the manual

Posted on Apr 02, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

My Motorola H700C was doing the same thing, I had it paired to my Sanyo Katana II. But then it just stopped working. What I did to get back up & working was to keep it on till the battery was fully 100% dead, then I left it charging all night and BAM, next day linked up again & it worked fine without any problems.

Posted on Dec 01, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I am unable to charge my H700C. I have tried 3 different chargers with no luck. This is the second H700C that this has happened to. I have only used it maybe 50 times. Salesman says it is probably a broken pin in the unit and can not be fixed. Is that true?

Posted on Jan 15, 2009

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

pincer
  • 377 Answers

SOURCE: motorola h700c

Have you tried a soft reset of the unit?

Try uninstall and install again the devices/

Posted on Mar 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I installed Windows 7 on my dell machine, now i have problems with USB MODEM Qualcomm CDMA Technology MSM Drivers for Windows 7 are missing. please assist I USE CDMA FIXED WIRELESS PHONE FOR INTERNET....


If windows isn't auto detecting the drivers automatically, you'll have to install them manually.

I can't find anything on a Hyundai Mobile phone, but the model AX380 comes up with the LG wave. Not sure if this is the same phone or not. However, the drivers for the AX380 can be found here: Product Support.
Hope this helps!

Feb 05, 2015 | Dell Cell Phones

2 Answers

Motorola h700c


Have you tried a soft reset of the unit?

Try uninstall and install again the devices/

Mar 16, 2008 | Motorola Mobility Bluetooth...

Tip

There are only four digit spaces for the unlock, and 1234 will not work.


I've seen alot of people asking about the security code for their phones.
Your manual will tell you and unless it has been changed by the owner it should be 12345 as that is the default security code x

on Apr 14, 2009 | LG KF600 3MP InteractPad Triband Phone...

1 Answer

How to view pictures off of my micro Sd card on my AX380 model phone


Connect the supplied USB cable from your cell phone to theUSB port on your computer.
The computer will see the cell phone as an external storage device or anexternal mass storage device, you can then open the photo folder on your cellphone and copy the photo to your computer. If the photos are stored on a mini or micro SD memory cardthen - An alternate method is to remove the mini or micro SD memorycard from the cell phone and insert it into an USB card reader then connect itto the USB port on your computer. Youcan then open the photo folder on the micro or micro SD memory card and copythe photo to your computer.

Sep 09, 2011 | LG Wave AX380 Cellular Phone

1 Answer

I locked my lg ax380 by holding the star button and it locked and i dont know the 4 digit code to unlock it


hi

try the default code 0000.if it not working means format the phone .. this will relieve your phone from the lock.. kindly format the phone and try it..

thank you

Dec 20, 2010 | LG Wave AX380 Cellular Phone

1 Answer

My AX380 cell phone keypad was accidentally locked....I don't have a code, since I didn't mean to lock it. How can I get it unlocked so I can use it again?


Oh..it is to bad for you but I will try my best to help. okay.:-) so just cool and relax. You said you accidentally lock it and forgot the unlock code right? Here's one thing I want you know, it is the best one to do. Get your phone to the authorized retailer and have it unlock or take it a cellphone repair shop, they probably flash your phone and reprogram it.

Dec 18, 2009 | LG Wave AX380 Cellular Phone

1 Answer

Cant pair my bluetooth


The default code is 0000 for most bluetooth devices. If that doesn't work try 1234.

Sep 12, 2009 | LG Wave AX380 Cellular Phone

1 Answer

I am trying to pair my jabra bluetooth with my lgax380 phone.


The default for bluetooth is 0000. That's usually universal for most bluetooth headsets. If that doesn't work for you try 1234.

Sep 12, 2009 | LG Wave AX380 Cellular Phone

1 Answer

I locked the keys on my lg ax380 wave cell and i dont remember the code. How do i unlock it?


Re- set phone to factory settings. This will erase your memory.

Try the last four digits of your phone number.

May 09, 2009 | Motorola Mobility Bluetooth...

Not finding what you are looking for?
Motorola Mobility Bluetooth Headset-Silver/Black Headset Logo

16,467 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Radio Communications Experts

Lawrence Oravetz

Level 3 Expert

10397 Answers

Brad Brown

Level 3 Expert

17490 Answers

Dennis

Level 3 Expert

333 Answers

Are you a Motorola Mobility Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...