Question about Microsoft Windows XP Home Edition

3 Answers

I getting error code in system log after automatic restart the code is - Error code 1000007f, parameter1 00000008, parameter2 80042000, parameter3 00000000, parameter4 00000000.Event ID 1003 pls help me.

Posted by on

Ad

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 91 Answers

Hello there,I suggest you to save all your important files, andfind your bootable disk for winxpthen reformat it
the problem may cause of a virus,trojan or worm that infect with your operating system starts up...

Posted on Oct 11, 2011

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 31 Answers

Insert Windows cd on drive and boot the system. use updrade option.it will take appo. one hour to complete.

Posted on Dec 14, 2007

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 178 Answers

If the problem is a recent one,

restore your system to an earlier system checkpoint.

Posted on Dec 13, 2007

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Designjet z2100,what is System Error 79:04


I researched and found several options to fix, hope it works for you.


There are two (2) ways to fix 79 Error:

Advanced Computer User Solution (manual restore):
1) Start your computer and log on as an administrator.
2) Click the Start button then select All Programs, Accessories, System Tools, and then click System Restore.
3) In the new window, select "Restore my computer to an earlier time" option and then click Next.
4) Select the most recent system restore point from the "On this list, click a restore point" list, and then click Next.
5) Click Next on the confirmation window.
6) Restarts the computer when the restoration is finished.

Novice Computer User Solution (completely automated):
1) Download (Error 79) repair utility.
2) Install program and click Scan button.
3) Click the Fix Errors button when scan is completed.
4) Restart your computer.
-------------------------------------------------------------------------------------------

Click here follow the steps to fix error 79 and related errors.

Instructions install_box.png windows-versions.gif

To Fix (error 79) you need to follow the steps below:

Step 1:
Download (Error 79) Repair Tool

Step 2:
Click the "Scan" button

Step 3:
Click 'Fix All' and you're done!

Compatibility: Windows 7, Vista, XP
Download Size: 1.5MB
Requirements: 300 MHz Processor, 256 MB Ram, 22 MB HDD



79 Error Code is caused in one way or another by misconfigured system files in your windows operating system.

So, If you got 79 Error then We strongly recommend that you Download (Error 79) Repair Tool.

This article contains information that shows you how to fix your windows 79 error both (manually) and (automatically) , In addition, this article will help you troubleshoot some common error messages related to 79 error code that you may receive.

Nov 14, 2012 | HP Office Equipment & Supplies

1 Answer

Computer restarts randomly


If you are using Windows (XP, Vista or 7) then open the Computer properties by clicking on the Computer icon (on desktop or start menu) then go to the Advanced page tab and check if you have the option to automatically restart the system set on in the Startup and Recovery Settings section. If this is on, then Windows will restart the system any time that a critical error is encountered.

1_12_2012_7_07_19_pm.jpg
1_12_2012_7_08_50_pm.jpg

The other place to check is in the Windows Event logs (system log) provided this option is enabled.
You should be able to access the event logs by right clicking on the Computer icon and then selecting the Manage option followed by opening the Event viewer where you should look for any critical, error or warning entries that may occur at the times when the computer restarts itself (or posted immediately when it restarts).

Jan 12, 2012 | Toshiba Computers & Internet

1 Answer

Automatic restart my laptop.Windows vista


Hi,

If you are able to boot the computer in safe mode, you can disable the Automatic Restart from the Control Panel.

Open Control Panel.

Click on the System and Maintenance link.

If you're viewing the Classic View of Control Panel, you won't see this link.

Click on the System link.

In the task pane on the left, click the Advanced system settings link.

Locate the Start up and Recovery area and click on the Settings button.

In the Start up and Recovery window, locate and uncheck the check box next to Automatically restart.

Click OK in the Start up and Recovery window.

Click OK in the System Properties window.

You can now close the System window.

From now on, when a problem causes a BSOD or another major error that halts the system, the PC will not automatically reboot. Rebooting manually will be necessary.


If you're unable to fully start Windows Vista due to a Blue Screen of Death error, you won't be able to disable the automatic restart on system failure option as described in the steps above.

Try the steps below:

Just before the Windows Vista splash screen shown above appears, or just before your PC automatically restarts, press the F8 key to enter Advanced Boot Options.

You should now see the Advanced Boot Options screen.

Using the arrow keys on your keyboard, highlight Disable automatic restart on system failure and press the Enter key.

After disabling the automatic restart on system failure option, Windows Vista might continue to load. Whether or not it does depends on what kind of Blue Screen of Death or other problem Windows Vista is experiencing.

Since you disabled the automatic restart on system failure, Windows Vista will no longer force a restart when it encounters a Blue Screen of Death.

Now that you have the STOP Code associated with the Blue Screen of Death, you can troubleshoot the problem:

The following is the list of BSOD error codes with troubleshooting, you can find the troubleshooting steps using the error codes in the MS website also..

http://pcsupport.about.com/od/findbyerrormessage/tp/stop_error_list.htm

Hope this helped you. Please do rate me.

Thanks!!!!

Dec 21, 2010 | Computers & Internet

1 Answer

I can't shut down my PC,It restarts again!


This behavior may occur if Windows stops responding during a typical operation or during the shutdown process. By default, the computer is configured to automatically restart when Windows stops responding. To view this setting, follow these steps:
  1. Click the Start button, right-click My Computer, click Properties, click the Advanced tab, and then click Settings under Start up and Recovery.
  2. Under System Failure, view the Automatically restart check box. If the Automatically restart check box is selected, Windows automatically restarts if the computer stops unexpectedly.
If your computer constantly restarts while you are using it, or if you are trying to shut down the computer after it has stopped unexpectedly, click to clear the Automatically restart check box. If you clear this check box, you receive an error message when the computer stops responding. This error message may describe the cause of the problem. You can also review the system log in Event Viewer to view the critical stop error that occurs when the computer restarts. For additional information, click the following article number to view the article in the Microsoft Knowledge Base: 308427 (http://support.microsoft.com/kb/308427/ ) HOW TO: View and manage event logs in Event Viewer in Windows XP To configure the way that Windows responds when the computer stops unexpectedly, follow these steps.

Note: You must be logged on as an administrator or a member of the Administrators group to complete this procedure. If your computer is connected to a network, network policy settings may prevent you from completing this procedure.
  1. Log on to the host computer as either an administrator or the owner.
  2. Click Start, and then click Control Panel.
  3. Under Pick a category, click Performance and Maintenance.
  4. Under the or pick a Control Panel icon section, click System.
  5. Click the Advanced tab, and then click Settings under Startup and Recovery.
  6. Click to select any one of the following check boxes under System Failure:
    • Write an event to the system log
    • Send an administrative alert
    • Automatically restart
    At last if nothing works then clear the "Star up"
  7. C:\Documents and Settings\All Users\Start Menu\Programs\Start up
    If you are not satisfied then If you are using XP then repair it.

thanks

Jul 05, 2010 | Computers & Internet

2 Answers

I am getting an error everytime after 5 minutes, w...


Could you please provide me the exact error message?

However to stop the system shutdown first follow these steps.

Disable automatic system restart.

1. Restart the computer and press the f8 key to open the Advanced Boot Options menu.
2. Select the Disable automatic restart on system failure option.
3. Restart the computer to accept this change.
Then go to safe mode

This problem occurs after a memory dump file (error log file) is written by Windows XP. Because the memory dump file flag not reset in Windows XP the memory dump file will contiue to be written every time Windows is restarted.

1. Restart the computer and immediately press f8 repeatedly. Use the arrow keys to select Safe Mode and then press enter .
2. Click Start , right-click Computer , and then select Properties .
3. Click Advanced system settings , grant permission to continue if prompted, and then click the Advanced tab.
4. On the Advanced tab, click Settings
  1. In the Virtual Memory section, click Change .
  2. For Paging file size for selected drive, click No Paging File , and then click Set .
  3. Click Yes after the following warning appears:
If the paging file on volume X: has an initial size of less than xx megabytes, then the system may not be able to create a debugging information file if a STOP error occurs. Continue anyway?
(X is the drive letter and xx is the amount of RAM installed on your computer minus 1 megabyte.)
  1. Click System Managed Size .
  2. Click OK four times to return to the Windows Desktop Screen and then restart.
For more information plz check the below doc from HP.
I hope this will definitely resolve your issue.
If not plz get back with the exact error message so I can give you better solution on this.
If you find this helpful then Plz vote for me..Dreamkam

May 21, 2010 | HP Pavilion dv6000z Notebook

1 Answer

Laptop won't start up, only gets to windows starting up page and then restarts over and over


It is a Windows error. When booting again press F8 and use the "Disable automatic restart on system failure option". You get an error code.
Please tell me that error code.

Sep 30, 2009 | Computers & Internet

1 Answer

I have a Dell Inspiron 1525 and I am getting the error message 2000-0146


This error code is part of the DST (Disk Self Test). Unfortunately that particular error code is telling you that there are previous errors in the log. There are multiple things that can easily lead to hard drive errors.

The first thing I would do is a checkdisk. To initiate this, open My Computer. Right-Click on the C:/ drive and select Properties. Click on the tab that says Tools. And there is an option that says "check now" under Error Checking. Select both options on this tab: Automatically fix file system errors and Scan for and attempt recovery of bad sectors.

This will likely give you a message saying it's unable to check now and will ask to do so on the next reboot. Restart your system and wait for the scan to finish. After this, check your logs and see if you're still getting the same errors.

Jun 21, 2009 | Dell Inspiron 6400 Notebook

1 Answer

Computer restarts on shutdown


If your computer constantly restarts while you are using it, or if you are trying to shut down the computer after it has stopped unexpectedly, click to clear the Automatically restart check box. If you clear this check box, you receive an error message when the computer stops responding. This error message may describe the cause of the problem. You can also review the system log in Event Viewer to view the critical stop error that occurs when the computer restarts.

  1. Click the Start button, right-click My Computer, click Properties, click the Advanced tab, and then click Settings under Startup and Recovery.
  2. Under System Failure, view the Automatically restart check box. If the Automatically restart check box is selected, Windows automatically restarts if the computer stops unexpectedly.
Thanks & Regards
Nandu :)

Mar 25, 2009 | MSI Computers & Internet

1 Answer

Window shut down automatically and restart, then shut down again... It happened after a window update yesterday lunch time.


Recovery SettingsOne of the things that is quite different about Windows XP compared to Windows 9x (9x is shorthand for Windows 95, Windows 98, and Windows Me in all their various versions), is that one can control how it responds to certain critical errors—those that cause the infamous Blue Screen of Death (BSOD). In Windows XP, the default setting is for the computer to reboot automatically when a fatal error occurs. If that fatal error only occurs when you're shutting down, the system reboots automatically.
If you haven't changed any of the system failure settings, you should be able to see the error by looking in the Event Log. But a better long-term solution is to turn off the automatic reboot so you can actually see the error when it happens—chances are it will tell you enough about itself to let you troubleshoot further. To change the recovery settings to disable automatic rebooting:
1.
Right-click My Computer, and then click Properties.
2.
Click the Advanced tab.
3.
Under Startup and Recovery, click Settings to open the Startup and Recovery dialog box.
4.
Clear the Automatically restart check box, and click OK the necessary number of times.
5.
Restart your computer for the settings to take effect.
Now when you go to shut down and a fatal error occurs, you'll at least see it and it won't cause an automatic reboot. You still have to sort out what's causing the problem, but that gets us to the next section quite nicely.

Nov 04, 2008 | Computers & Internet

Not finding what you are looking for?
Microsoft Windows XP Home Edition Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

3015 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Alun Cox

Level 3 Expert

2678 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...