Question about Philips 55PP9401 55" Rear Projection Television

1 Answer

50p8341 Phillips rear projection Color is blurry .Top and bottom ...Thanks Vince

Posted by on

  • bigrinwv Jun 15, 2008

    Help...I have tried setting convergence but it doesn't really help.Multi point crosses seem to be lined up ok but hard too really tell picture is so blurry, also the cross seems to jump way out of line with the other crosses. Do I need to replace IC like I read here or is this thing ready for the heave ho. Hope not..hard economic times here like every where.



    Thanks.."R"

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,694 Answers

Replace convergence IC's located on largest heatsinks ....
Part number STK392-110 sub STK394-160E for durability.....T.

Posted on Dec 13, 2007

  • Vista Electronics Dec 24, 2007

    Vince,

    Any further help needed??..............................T.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Picture is blurry


Can you clarify "blurry", is the color skewed or even 3d looking? I am here to help and if you can post a photo here that would help---see attached photos of convergence problems which can fit the description you gave:



12_4_2012_11_22_50_pm.jpg12_4_2012_11_23_17_pm.jpg

Dec 04, 2012 | Philips 50P8341 50" Rear Projection...

1 Answer

We changed the coolant fluids in the blue and green and now the screen is clear in the middle and blurry on sides and color is off on sides also??


You are going to have to Realine the Convergence and set Focus to each Tube on the Screen/Focus block Control.Their is 3 on Top Focus and 3 controls under them for screen drive R/G/B.
You will need to know how to Enter Service Menu:
Do you still have manual that came with TV?

Jul 24, 2011 | Philips 50P8341 50" Rear Projection...

1 Answer

I am having a hard time adjusting the color and focus on my Phillips 50p8341. Can you help?


This is a very common failure on Projection TV sets.
Screen looks 3D
Colors don't line up
One or more colors can't be adjusted when using the convergence menu.
Screen is bowed or warped.
You can see some example photos and find a solution here...
http://www.fixya.com/support/r2861627-updated_convergence_problems_amp

Sep 12, 2009 | Philips 50P8341 50" Rear Projection...

1 Answer

Picture is pale, yet reds are bright. checked color, brightness, and conversion settings. TV seems unresponsive to the color, tint, and brightness adjustments.


open the back and look into the projectors red blue and green should be clear picture if its blurry need to change the coolant if its not on need to replace the projectors

Aug 22, 2009 | Philips 50P8341 50" Rear Projection...

1 Answer

My 60" Phillips tv has a blurry picture at the bottom and the top


The convergence output IC's need to be changed. A very common problem with all projection tvs.

Jun 04, 2009 | Philips 60PP9352 60" Rear Projection...

1 Answer

Projection tv is Blurry and offset


You have a focus and screen control box it has 3 controls on top 3on bottom these are the controls for Red-Green-Blue screen drives and for focus to each tube. IT should have Focus /Screen on it.

Dec 19, 2008 | Philips 50P8341 50" Rear Projection...

1 Answer

My Phillips 50P8341 50 inch has color adjustment problems, any suggestions?


http://www.usersmanualguide.com/philips/tv__projection_tv/50p8341
go to this link and download Owner's / User's manual

Dec 13, 2008 | Philips 50P8341 50" Rear Projection...

1 Answer

Philips 50P8341 50 in. Rear... Problem:


You CRT coolant needs to be replaced, its a very common problem with the phillips and magnavox projection TVs. If you need more info on the Coolant Change let me know.

Jul 14, 2008 | Philips 55P8341 55" Rear Projection...

1 Answer

50P8341 red bows


Convergence ICs or the resistors powering them are bad. Check for open resistors near the ICs if any are open, change both ICs and the resistors.

Feb 10, 2008 | Philips 50P8341 50" Rear Projection...

1 Answer

Blue screen with sound but nothing else!


I, too, acquired a Phillips without a manual and was experiencing a similar problem. My model is PTV 916, but if your TV has a "source select" button, say a prayer and press the button. From that point, I don't know what else I did, but I do get TV programs now.

Jan 04, 2008 | Philips 50P8341 50" Rear Projection...

Not finding what you are looking for?
Philips 55PP9401 55" Rear Projection Television Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75581 Answers

matt martin
matt martin

Level 3 Expert

1229 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...