Question about Indesit 18 in. D41 Slim-Line Free-standing Dishwasher

1 Answer

Indesit IDL40, 2nd & 3rd light flashing

Having installed the new slimline dishwasher yesterday, I proceeded to test the machine - but everytime came across the same problem. The machine would fill up with water & then start a cycle, when it would reach the stage where it seemed to want to fill up a 2nd time the 2 lights (2nd & 3rd) would start flashing & 30 secs later the machine would just stop.
Reading the manual, these flashing lights indicate that the water tap might be turned off, but obviously the machine filled initially so this isnt the case.
The only thing i've noticed is that the tap the machine is connected to, the water only really trickles out of - now before I get a plumber in to see if this is the problem, was just wondering if anyone could give any pointers 1st,

Thanks

Posted by on

Ad

1 Answer

It can also be that the pressure is too week. If you look a tthe manual it mentions this exact symptom. I know because i ve a similar issue. cheers

Posted on Dec 29, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

INDESIT IDS105 WASH LIGHT FLASHING


Purchased a second hand Indesit slimline IDS105, to find it would only complete the first wash cycle, at the end of this cycle the LED Would just flash, with the waste pump coming on every 2 mins to empty it. Even after 4 hours it still didn't complete a full cycle.

I looked through the manual only to find that the error code was not explained. I phoned Indesit, after talking to 12 different people, the only thing the useless company wanted to know was whether i had warranty or whether i wanted extended warranty, then after establishing i didn't, they just biffed me on to the next, when i actually got through to a loosely knowledgable person they said they would send out an engineer for you as we are not allowed to tell you what the error code means, I just put the phone down.

So... to the solution, after dismantling the dishwasher i tested every single component, with a multimeter. Through elimination and research i had a hunch it maybe to do with the heating element or NTC Temp sensor. Tested the NTC, perfect. Tested the resistance of the heater this read 0.34ohms near enough should be around 0.29. So i took the mainboard out and tested the relay and this is where my trouble and solution arose. To test the relay i got a 12v battery and the datasheet for the relay, tested the contacts, to here a nice click....Then pop!!! NOOOO i blew the IC that controlled the Relay (ULN2003A Darlington transistor array). I ordered one of ebay (but RS,Farnell sell them for a cheaper price) Unsoldered the blown IC, soldered the new one on.

Put the Dishwasher back together, crossed my fingers, turned it on, and selected programme 2 (Normal wash) and pressed start. 1 hour and 50mins of intense tension later it had completed the whole cycle!!!!!!!! Ive never been so happy!!!

Cheers
Up yours Indesit!
Sam

Jul 09, 2012 | Indesit Dishwashers

2 Answers

Dishwaher not working


switch on water appears to run in after a few minutes second and forth green lught comes on and machine stops it is a IDL500 indesit machine

Jan 09, 2009 | Indesit 24 in. IDL500 Built-In Dishwasher

2 Answers

Dishwasher indesit DI62


green light 2 flashing sounds like machines doing something switched of at mains & back on to same flashing green light

Mar 01, 2008 | Indesit 18 in. D41 Slim-Line Free-standing...

1 Answer

Indesit dishwasher


machine is flooded in base
means you have a leak in dishwasher
dismantle check feed pipe to top basked probable faulty feed pipe replace if so

Feb 23, 2008 | Dishwashers

3 Answers

Indesit IDL 40 Slimline flashing lights


the problem you have got with the flashing lights is that its the rinse aid or in need of more salt, hope thats sorts it for you

Dec 12, 2007 | Indesit 18 in. D41 Slim-Line Free-standing...

1 Answer

Indesit D41 Slimline


HI THERE - I ALSO INHERITED A D41 - I HAVE JUST FOUND - SITE WHERE YOU CAN DOWN LOAD INSTRUCTION MANUAL FOR MANY INDESIT PRODUCTS - I NOW HAVE INSTRUCTION MANUAL FOR MY D41 NICELY PRINTED OUT - SEE www.indesitservice.co.uk hope this helps you too - Helen

Nov 14, 2007 | Indesit 18 in. D41 Slim-Line Free-standing...

1 Answer

Indesit IDL40 Slimline Dishwasher - Won't start cycle


indesit idl 40 not pumping water out properly, ends with flashing light no 4 and plates dry but water still in machine -have to pump out using start stop button but within 2 hours base filled up with water. Can't afford massive call out prices as lady on my own.....

Nov 12, 2007 | Indesit 18 in. D41 Slim-Line Free-standing...

2 Answers

Flashing star sign


Try turning off the breaker to it for a few min… and then turn it back on that might reset it.

Nov 07, 2007 | Indesit 24 in. DE73 Evolution...

Not finding what you are looking for?
Indesit 18 in. D41 Slim-Line Free-standing Dishwasher Logo

561 people viewed this question

Ask a Question

Usually answered in minutes!

Top Indesit Dishwashers Experts

Eric Taylor

Level 3 Expert

560 Answers

Marvin
Marvin

Level 3 Expert

82208 Answers

NOEL
NOEL

Level 3 Expert

8386 Answers

Are you an Indesit Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...