Question about Logitech QuickCam Orbit Personal Web Camera

1 Answer

The perimeter when i try to open logitech quickcam it says the perimeter is not right how do i fix that

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Normal 0 Did you install the software with the camera connected to the computer? Disconnect the camera from the USB port and reinstall the software. When the program asks you to connect the camera, do so, and it should work. Hope this is of some help. Bud

Below is info for setting up Audio & Video to chat on line after you install , either Skype or a messenger program.


Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype set it up as follows:

  1. Go to TOOLS, then OPTIONS, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if installed properly will come up and show a picture.
  4. Then on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now see and talk to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

C. Windows Live Messenger:

  1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
  2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
  3. Next go to the Menu Bar on right side, click on “ “Action.”
  4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: You audio and video shoud work. Enjoy.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Posted on Jan 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the advanced settings on my cam supposed to be?


The Logitech QuickCam is a webcam for Windows-based notebooks and laptop computers. The device also works on desktop computers, but contains the mounting hardware for portable computers. The webcam includes a USB connection, utility application and the device driver so your notebook's operating system can recognize the device. Like other webcams, you need to focus your Logitech QuickCam so individuals viewing you on the Internet or through other means can see you clearly. Open the Logitech QuickCam utility program by clicking on the program's icon on your computer's desktop or by clicking "Start," "All Programs," "Logitech," " Logitech QuickCam." Click on the chat client or website you are using the Logitech QuickCam on if you are not using the Logitech QuickCam utility. Turn the webcam's focusing ring on the front of the camera to the left or right slowly to focus the camera. You will see your image in the Logitech QuickCam preview window on your notebook's screen. Rotate the webcam's head, if needed, to center your image in the preview window. Hope this helps.

Jan 19, 2013 | Logitech C110 Webcam

1 Answer

Focus


The Logitech QuickCam is a webcam for Windows-based notebooks and laptop computers. The device also works on desktop computers, but contains the mounting hardware for portable computers. The webcam includes a USB connection, utility application and the device driver so your notebook's operating system can recognize the device. Like other webcams, you need to focus your Logitech QuickCam so individuals viewing you on the Internet or through other means can see you clearly. Open the Logitech QuickCam utility program by clicking on the program's icon on your computer's desktop or by clicking "Start," "All Programs," "Logitech," " Logitech QuickCam." Click on the chat client or website you are using the Logitech QuickCam on if you are not using the Logitech QuickCam utility. Turn the webcam's focusing ring on the front of the camera to the left or right slowly to focus the camera. You will see your image in the Logitech QuickCam preview window on your notebook's screen. Rotate the webcam's head, if needed, to center your image in the preview window. Hope this helps.

Jan 17, 2013 | Logitech C615 Webcam

1 Answer

Logitech Quickcam: Recording Level slider moves uncommanded


There is one more mic control you are forgetting. In the system tray you have a volume control. When you click it open you would come across another Mic control that slides up and down try using this one. I feel that if you use two of these the handling may become a little easier. Let logitech's control be constant and use this one to handle the speech contents.

Dec 09, 2009 | Logitech QuickCam for Notebooks Pro...

1 Answer

My quickcam doesn't focus how do i fix it


Front you have a settings cirle rotate it to your left/right direction and set your focus by putting on the cam on PC

Oct 11, 2009 | Logitech QuickCam Connect Webcam

1 Answer

Lighting problem with logitech quickcam


try to fix from the settings...it does have some kinda settings that allow ya to fix the light ....clic the low light case....you can not miss it ...and gave it more bright and contrast ....
you can also bright it up from gamma ...
so....remember file/preferences/camera settings....etc...
and ussualy it can be put to remember setings...and when you open it ...and is not setted right ...just clik restore....
I sincerly hope this will fixx you problem ...I adviced you in how they generally work ...but I am not familliar with the model ....and they are having differences from on emodel to another...its ussualy small and it depends of the kinda driver they use....
but in most of them ...you find those settings when you use it on IM ....

Apr 17, 2009 | Logitech QuickCam Express Web Camera

1 Answer

Marie_hugh26 driver for quickcam messenger


Here you go, a guide on how to fix the issue

  1. Download QuickCam 8.4.8 with driver for WinXP.
  2. Install WinRAR if not already installed yet.
  3. Open the setup installer qc848enu.exe and unpack its contents to a folder. Alternatively, right click on qc848enu.exe and select “Extract to qc848enu\” option.
  4. Insert or plug in the Logitech QuickCam Messenger to a USB port if not already done so.
  5. An “Driver Software Installation” icon in systray (notification area) should appear, which will pop up detailed message if click. It should fail, and “Add Hardware Wizard” dialog window will appear. Choose to install the driver manually by instructing the Wizard to locate and look for the web cam driver inside the Drivers folder under the unpacked folder of the qc848enu.exe setup program. You can use browser button to select the folder.
  6. Windows Vista should grab the XP driver and install it properly.
  7. Download the latest version (10.5.1) of Vista compliant QuickCam software from Logitech to install the software on Vista.
  8. Run the setup (qc1051enu) normally. You may need to skip the detection of webcam near the end of installation process.

Mar 23, 2009 | Logitech QuickCam Messenger Web Camera

1 Answer

QuickCam Zoom not working after upgrade to Vista


Just read the most wonder article on how toe fix your quickcam zoom for vista follow these steps

These is from 2007 post so you will have to google for the drivers mentioned. I did and it worked

I have a Logitech Quickcam Zoom and this is how I got it to work:
1. Install QuickCam 32-bit Version: 10.5.0 Build 1096b
It can be found here: http://www.logitech.com/index.cfm/downloads/software/CA/EN,CRID=1794,contentid=10234
2. When you get to the camera detection part where it asks you to plug in your camera, plug it into a new usb port (if you had it plugged in when you installed Vista) and just press skip.
3. Windows may try and find the driver for it, you can cancel that too.
4. Install the old QuickCam software (Version: 8.4.8 build 1034A)and overwrite anything it asks you to (it will fail to install completely because of the new version, but it will put the files you need into the Logitech program files directory.
The old software is here: http://www.logitech.com/index.cfm/downloads/software/CA/EN,CRID=1794,contentid=7649
5. Go to the windows orb (former start button), open control panel, go to system, then on the top left of the window click device manager.
6. Find the unknown usb device (hopefully you only have one... otherwise unplug anything else that doesn't work or you haven't updated the driver for yet)
7. Right click and select update driver, choose a location to find the driver, navigate your way to C:\Program Files\Logitech\QuickCamWebInstall\Drivers\WinNew\PRO2
8. Press OK or whatever, and let it install.
9. Enjoy!

Mine didn't even need to reboot and worked with the 10.5 QuickCapture software. Still need to test with Skype and Live Messenger though.

Jan 08, 2009 | Logitech Quickcam USB Zoom Webcam

3 Answers

Logitech quickcam zoom with vista?


I haven cheked this ,

this is a patch to make your webcam compatible with vista.

try this 
http://www.logitech.com/pub/techsupport/quickcam/qc1150.exe

i m sorry if it doesn work becos i don ve the webcam to check wit the patch

Sep 20, 2008 | Logitech Quickcam Zoom 5 Pack Webcam

1 Answer

Cam is not completing installation and setup


I found the solution the drivers on the disc buy shipped are not the right drivers. NOR are the newest ones on Logitech's site. Uninstall them and use this instead:

http://drivers.softpedia.com/get/SCANNER-Digital-CAMERA-WEBCAM/LOGITECH/Logitech-QuickCam-Chat-848-build-1034A.shtml

Fixed me right up :)

Jan 20, 2008 | Logitech QuickCam Messenger Web Camera

Not finding what you are looking for?
Logitech QuickCam Orbit Personal Web Camera Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Computers & Internet Experts

micky dee

Level 3 Expert

3015 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...