Question about Kenwood DNX7100 Car Video Player

2 Answers

Gxm 30 just installed xm and the player shows signal just does not produce sound.. i can change the xm channels i see them just dontr hear them ?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer
Re: gxm 30

I fixed it by going into the tuner screen and checking the T1 box. Now everything works like it should. I found it by accident, I would get the am fm tuner to play but nothing else had sound, DVD, USB, XM from the nav. Somehow the T1 box effects the sound output of all the other sources.  Make sure all the settings on the av screen are setup as the default like the manuel says.

Posted on Jan 03, 2008

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers
Re: gxm 30

Me too same problem, no audio with the XM. Do you think it has anything to do with Audio-Video out setting on the unit?

Posted on Jan 02, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have a Kenwood ddx6019 with XM satellite radio. recently, I entered a manual channel change and lost all reception. A banner reads LOADING LOADING across the bottom of the screen. Any ideas on how to...

I have a Kenwood ddx6019 with XM satellite radio and sirius. i want to know how do i turn on the xm so i can get live traffic update and my garmin gps unit and weather. and were to i find the mx radio id for xm. i found it for sirius

Nov 01, 2010 | Kenwood DDX-6019 Car DVD Player

4 Answers

Dnx-7100 and XM

just check whether the connections are proper

Jun 21, 2008 | Kenwood DNX7100 Car Video Player

1 Answer

Pioneer avic n3 doesn't play audio, but has button sounds

There is a built-in speaker for those tones inside the unit.
Seems as if your internal amplifier IS blown. It is probably cheaper - and will sound better to install a cheap 2 or 4 channel amplifier anyway.
The head units BOAST 50W per channel... but that is PEAK power. Most actually only produce 10-15W rms.
Replacing an output on the head unit will run you approximately $75 for the first... and $20 each additional. (up to 4)

You can get a great class a/b 2 or 4 channel amplifier for that price with built in crossovers and your sound will be 100x better!

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

May 14, 2009 | Pioneer AVIC-N3 Car DVD Player

1 Answer

What do i need to get the xm radio to work

U need to order the Terk XMD1000 Direct XM Tuner Box. Its Search on the internet for it.I bought mine on Cost is 49.99. Its comes with the antenna and box. Your XM radio code is on the box. Go aline and setup an account with SiruisXM and its going to ask for that code. once you do that. Ensure you are not under any cover to get a good signal and it will tell you to go to a certain channel. Then you will be pulled in. if you have any issue contact me at or I will walk you through. Good luck.

Jan 15, 2009 | Jensen VM9510 Car DVD Player

1 Answer

Dnx-7100 and XM

the Garmin GXM-30 antena works

Apr 04, 2008 | Kenwood DNX7100 Car Video Player

2 Answers

No traffic and weather showing-using GXM 30 smart antenna with subscription

the only idea i have is contacting xm asking if they can resend the traffic signal to your unit.

Jan 29, 2008 | Kenwood DNX7100 Car Video Player

1 Answer


You will need to purchase the XM antenna ( GXM-30), and also purchase the service.

Jan 15, 2008 | Kenwood DNX7100 Car Video Player

2 Answers

XM radio sounds like crap!!!

if the xm and gps antennas are close together this will happen. u will have to move one to the front and the other to the back of the vehicle.

Nov 03, 2007 | Kenwood DNX7100 Car Video Player

4 Answers

Pioneer AVIC-D2

OK, I spoke to Pioneer tech support and they had me go to destination>settings>connection status. If the parking brake shows "off", many of the functions will not work as a safety measure. I guess this is their version of interlock. I think it can be defeated with a wire-around, but thats what they say the problem is.

Mar 21, 2007 | Pioneer AVIC-D2 DVD Nav/6.5"...

2 Answers

Navigation stopped working properly after xm installation

it seems to me that they have installed something incorrectly and that it is interfering with your nav,ring the company to see if they are compatible to work together. if they are then they need to check they have installed it correctly. hope this helps

Feb 24, 2007 | Pioneer AVIC-N2 Car DVD Player

Not finding what you are looking for?
Kenwood DNX7100 Car Video Player Logo

Related Topics:

284 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Video Players Experts

D. E. Hev

Level 3 Expert

1059 Answers

Cindy Wells

Level 3 Expert

4720 Answers


Level 3 Expert

56798 Answers

Are you a Kenwood Car Video Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides