One way i have found is to (no joke) take the back panel off the TV BECAREFUL THERE IS HAZARDOUS VOLTAGE! Look to see if there is a DVD stuck in it, if so remove it. If this doesnt work let me know, i have other possible solutions
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There are two possibilities for this fault. The first one is the spinning problem of disc inside it. If loaded disc does not spins, the mechanism will eject it. The reason for this is damaged sled motor. Sled motor is one which spins the disc inside at high speed. It can be replaced. The second reason is of Laser Pickup Unit itsef. If it does not emit laser beam, the main system circuit will recogonise as there is no disc in the tray, and play function is energised, and will eject the tray out. Check for the first one. This is most comon fault with DVD players. OK.
There might be a mechanical problem with your dvd player but if you want to eject the dvd that is inside the player, try this:
Look for a small hole in front of the player, usually above the cd tray. Get a a small piece of wire or a paper clip that will fit into the hole. Push the wire of paper clip intot he hole until the cd tray opens and then you can remove the cd/dvd.
how long has it been since you cleaned the DVD tray? you need to clean after about 10hrs. of play time on a DVD player, just buy a simple cleaning disc at the store, a Walmart, K-mart, Target,....etc....and run it through your player, just follow instructions on package.......I had this problem with my kids ps2, works fine now, the discs you rent are very dirty, and in turn leave your player dirty...hope this helps.....
This unit has seperate power supplies for the DVD and VCR side and the DVD side supply seems prone to failure. I have not isolated the cause, but can tell you this will require a component level repair. Unless you are a tech you may as well buy a new unit.
Open up the unit find the load and unload motor on the DVD carriage and turn it manually and this should eject the tray. You may even have to unscrew the carriage to get to the bottom of it to access the load and unload motor.
No but I'm having same problem and the dealer sugested just buying a new dvd player cause cost of repair or replacement is unbelivably high,approx 500 canadian for new dvd sleeve, the guy tells me they don't fix them they just put a whole new dvd player in from hthe manufacturer. Pretty disapointing considering how nice it is to have it built in.
Laura Have you tryed to unplug the unit for a bit and try pluging back in to the wall and press the eject button before anything else!! if that dosent work try pressing and holding the power button and at the same time press the eject button. If that dosent work then theres a mechanical or electrical fault thats causing it to not function vproperly and its time for a repair person to assit you. Good Luck