Question about Olympus Camedia C-750 Ultra Zoom Digital Camera

1 Answer

Flash Settings Only Work When in Night Mode

When in all other modes on my camera, it shows the "no flash" icon. I can not change it by pressing the flash button. Problem with night mode is the flash is almost always too much and washes out all my pictures. Is this a software/firmware problem with my camera. I can not seem to reset it. Hope this is clear enough. Thanks for any assistance anyone can offer.

Posted by on

  • Anonymous Jun 15, 2008

    i too have this same problem, has anyone got a fix?

  • James Jul 11, 2008

    I have the same problem too there must be a fix that someone is aware of

    James UK


×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hope this helps it got mine working
leave lens cap on in night mode then start up flash & take a shot,
press the flash key symbol button & you should see changes on the screen monitor, then go to auto mode to take a shot with flash make sure AF is not on.
Sorry it is a bit vague but this got mine working again.

Posted on Jul 12, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I turn flash on and off?


The multi selector is the round control on the rear of the camera with the OK button in its center.
The flash mode button is the top button on the selector, it has a lightning flash icon.

Press the flash mode button on the multi selector.
Highlight the desired mode and press the center of the multi selector.

The flash modes are:
AUTO; Flash fires automatically when lighting is poor.
AUTO WITH RED-EYE REDUCTION; Reduces "red eye" in portraits.
OFF; Flash will not fire even when lighting is poor.
FILL FLASH; Flash fires whenever picture is taken. Use to "fill-in" (illuminate) shadows and back-lit subjects.
SLOW SYNC; Flash illuminates mainsubject; slow shutter speeds are used to capture background at night or under dim light

The selected flash mode icon appears at the top of the monitor.

Oct 22, 2014 | Nikon COOLPIX L3 Digital Camera

1 Answer

How di I manually pop open the flash


Press the OPEN (flash) button.
This button is on the side of the camera just below the flash.

The flash mode button (lightning icon) is at the lower left on the rear of the camera.
This only changes settings when the flash is up.
This cycles through Auto, red-eye reduction, forced flash and no flash.
The mode shows in the finder or the LCD screen.
AUTO mode does not show.

Oct 20, 2014 | Sony Mavica MVC-FD95 Digital Camera

1 Answer

How do I turn off the flash on my D80


The Flash Mode button is at the side of the camera with the mode dial wheel.
If you look from there towards the lens you will find a small button with the typical arc icon.
Press the Flash Mode button until the display shows the flash icon with a line across it.
You may find more help in the Owner's Manual which you can find here:
http://www.nikonusa.com/pdf/manuals/dslr/D80_en.pdf

May 10, 2014 | Nikon D80 Digital Camera with 18-135mm...

1 Answer

How do i use nite vision on the Samsung s galaxy for her AT&T which has no flash


Open the camera app.
Then on the left hand side press the "SCN" scene select button.
Look for the scene mode labeled "Night". Press that "Night" icon twice.
It will return to the taking pictures screen - now in night mode.

Mar 14, 2011 | Samsung Cell Phones

1 Answer

I have an auto flash, but it's not flashing. Do I need to somehow turn this function on? If so, where is it?


Hi,

Follow below mentioned steps to turn flash on:-
  • Rotate MODE DIAL to any one of them Auto, program, portrait, landscape, sport or night mode.
  • Press POWER button to turn power ON.
  • Press Navigation button (left arrow button), Flash mode change each time button is pressed. you can use UP and Down Arrow button to change settings. Set it to FLASH ON.
  • Press OK to confirm settings.

Thanks...!!
4 thumbs rating keep us motivated to answer more free questions.

Feb 13, 2011 | Polaroid i936 Digital Camera

1 Answer

Don't know what buttons on back of camera are for.


Besides the auto-flash mode, you can select fill flash, flash off, self-timer, and nighttime-view with or without flash.
Press the MODE-SELECTOR BUTTON until the desired indicator appears on the LCD PANEL.
c3015.gif Fill flash and flash off modes remain selected after you take the picture. To cancel the selection, press the mode-selection button or close and reopen the lens cover/flash to return to the auto-flash mode.
Fill flash
c3014.gif When bright light indoors or outdoors comes from behind the subject (backlighting), dark shadows (especially on faces) may occur. Use fill flash to lighten these shadows.
  1. Open the LENS COVER/FLASH to raise the flash and to turn the camera ON.
  2. Press the MODE-SELECTOR BUTTON repeatedly until the FILL-FLASH INDICATOR appears on the LCD PANEL.
  3. Frame your subject within the VIEWFINDER EYEPIECE.
  4. Partially depress the SHUTTER BUTTON. When the FLASH/CAMERA-READY LAMP turns off and the fill-flash indicator on the LCD panel stops blinking, fully depress the shutter button to take the picture.
Flash off
c3013.gif When you do not want to use the flash, especially indoors where flash is prohibited, such as in theaters and museums, or when you want to take twilight scenes or distant subjects that are beyond the flash range, or capture the ambiance of existing light, use the flash-off feature. Use a tripod or place the camera on another firm support, and use high-speed film because the shutter speed in these situations will most likely be slow.
  1. Open the LENS COVER/FLASH to raise the flash and to turn the camera ON.
  2. Press the MODE-SELECTOR BUTTON repeatedly until the FLASH-OFF INDICATOR appears on the LCD PANEL.
  3. Frame your subject within the VIEWFINDER EYEPIECE.
  4. Press the SHUTTER BUTTON to take the picture.
Self-timer with auto flash
c3016.gif Use this feature to include yourself in pictures.
  1. Use the TRIPOD SOCKET to attach the camera to a tripod or place it on another firm support.
  2. Open the LENS COVER/FLASH to raise the flash and to turn the camera ON.
  3. Press the MODE-SELECTOR BUTTON repeatedly until the SELF-TIMER INDICATOR appears on the LCD PANEL.
  4. Frame your subject within the VIEWFINDER EYEPIECE.
  5. Press the SHUTTER BUTTON. The SELF-TIMER LAMP will glow and then blink during the last three seconds of countdown.
    • To cancel the self-timer selection before the shutter releases, close the flash.
    • The self-timer automatically turns off after the shutter releases.
Night-view with flash
c3012.gif In this mode, the camera balances the flash and existing light exposure so you can take beautiful pictures of people at sunset or at night. Use a tripod or place the camera on another firm support, and use high-speed film because the shutter speed at night will most likely be slow.
  1. Open the LENS COVER/FLASH to raise the flash and to turn the camera ON.
  2. Press the MODE-SELECTOR BUTTON repeatedly until the NIGHTTIME-VIEW INDICATOR with flash appears on the LCD PANEL.
  3. Frame your picture in the VIEWFINDER EYEPIECE.
  4. Press and hold the SHUTTER BUTTON for 12 seconds without lifting your finger. Note: If you remove your finger from the shutter button before 12 seconds, the shutter will time out immediately.
  5. After 12 seconds, release the shutter button to take the picture.
Night-view without flas
c3011.gif In this mode, you can capture the natural existing light of city-night scenes or fireworks at night. Use a tripod or place the camera on another firm support, and use high-speed film because the shutter speed at night will most likely be slow.
  1. Open the LENS COVER/FLASH to raise the flash and to turn the camera ON.
  2. Press the MODE-SELECTOR BUTTON repeatedly until the NIGHTTIME-VIEW INDICATOR without flash appears on the LCD PANEL.
  3. Frame your picture in the VIEWFINDER EYEPIECE.
  4. Press and hold the SHUTTER BUTTON for 12 seconds without lifting your finger. Note: If you remove your finger from the shutter button before 12 seconds, the shutter will time out immediately.
  5. After 12 seconds, release the shutter button to take the picture.

Jun 17, 2010 | Kodak Advantix C400AF APS Point and Shoot...

2 Answers

How to switch off the flash in Canon Power Shot A510


in the take picture mode, press the button that has an image of the flash on it (the top of the circle) on the right, and keep pressing it until you've selected the image that shows the flash crossed out.

Mar 27, 2010 | Canon PowerShot A510 Digital Camera

1 Answer

Canon IXUS 80IS - I can't turn the flash on


When this camera is in "Auto" mode the only flash functions available are Auto or Flash Off - in order to get the option of "Flash On" for all pictures you have to put the camera in "Manual" mode - to do this:

-Set the mode switch to the camera icon
-Press the "Func./Set" button
-Use the left or right arrow keys to set it to Manual mode (its icon looks like half a camera with the letter M beside it)
-Press the "Func./Set" button again to save your mode change.

Now when you press the flash button and cycle through the choices there will also be a "Flash On" option.

Jul 26, 2009 | Canon IXUS 80 IS Digital Camera

1 Answer

Flash


Your camera is set at twilnight mode which has the flash suppressed and you won't be able to turn it on because of the fixed setting of twilnight mode to get the proper result of the picture. Due to the mode setting requirement, a shakey hand icon and no flash icon will show. If you press the flash mode button, it beeps. The twilnight setting has a low shutter speed, i.e. the shutter opens longer to allow more lights in, therefore it shows recording to let you know that the shutter is still open, and any moment of the camera will result in a blurred picture.
Now, check your camera mode dial and turn it back to the 'green' camera and see if you can get the flash to fire.

Jul 08, 2008 | Sony Cyber-shot DSC-W50 Digital Camera

1 Answer

DMC-FX01 Flash Does Not Work


In what mode are you trying to take photos? The flash will not work in certain modes (see the manual), for example the night mode. Or you accidentialy turned on sequential/burst mode (this is mode where camera takes more pictures on one shutter button press). Flash cannot be used in this mode also. I don't have FX01, but on FZ8 the camera will show flash icon in red, but will take the picture anyway without flash being triggered. The second problems seems like enabled power-saving mode, but those 5 seconds are too short for this. But anyway you can check in SETUP menu the settings for power-save. Also maybe the flash is broken and camera noticed it... I don't think this could be a software problem. Either problem with the flash, but more probably just setting of wrong mode.

Jul 24, 2007 | Panasonic Lumix DMC-FX01 Digital Camera

Not finding what you are looking for?
Olympus Camedia C-750 Ultra Zoom Digital Camera Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Olympus Cameras Experts

Steven Wander
Steven Wander

Level 3 Expert

593 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you an Olympus Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...