Question about RCA D52W20 52" Rear Projection HDTV-Ready Television

1 Answer

Xbox360 hook-up what is the resolution on this t.v. and do i have to hookup the hd cable that came with the xbox

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert that has over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 375 Answers
Re: xbox360 hook-up

Do you have component outputs from your xbox if so read the instructions and set tv in put to component or hd input if you choose to use them the set will auto adjust for the input and you might still have to enter the menu settings,

Posted on Dec 14, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

How should I connect a Sony Wega KF-50WE620 to an XBox360 ?

Since the TV accepts HD signals only via DVI and component inputs, the only logical way is to use the "Xbox 360 Component HD AV Cable" as show in the link below:

How to hook up your Xbox 360 or Xbox 360 to TV

The TV will not accept a VGA input. A cable converting HDMI to DVI would also require that you break out the L + R audio channels, too. The one I mentioned above does this all for you with no degradation in video signals.

Mar 26, 2015 | Sony Grand WEGA KF-50WE620 Television

1 Answer

Hooking xbox360 up for HD in component 1

Thats the highest setting, for component, that TV will show. it really is that simple. You would need HDMI connector to possibly go any higher. but I think you will find it is the TV.

Apr 01, 2010 | Mitsubishi WS-55511 55" Rear Projection...

1 Answer

Xbox360 hd hookup problem---1080i

Your component cable is probably switched to the HD setting. You have to switch it back in order to get video when hooked up to a regular TV.

Jan 30, 2009 | Mitsubishi WS-55857 55" Rear Projection...

2 Answers

HD ready?

If it is HD ready it will have HD component cable hookups. They are the red, blue, and green color coded hook up. You may also have RGB hookups which will look like a usb port. If you have any of these hook ups located on the TV then it is HD ready. If not then you were told false information. Let me know if you have any other questions.

Jan 24, 2009 | Toshiba 50A50 50" Rear Projection...

1 Answer

RCA D52130 52 in. Won't Display High Def

I doubt you'll look at this 2 years later, or even have the T.V.

I have the same TV and was able to view ps3 and xbox 360 games in 1080i, but it's a little tricky. First, let me say that the ps3 is probably not the best system to try using 1080i in unless you have a 360 to help trick the tv into working.

Xbox 360
You need to first set the video to 1080i. This will make the screen display in a bunch of horizontal lines most of the time, but if you keep toggling it on and off, it eventually works. To avoid having to sit and swap between the two modes, it's easier to first set it to 1080i and confirm the setting, then go back into the settings, select 720 (first option above 1080i) and cancel as soon as the video mode changes. 95% of the time this will make it display correctly in 1080i mode. If you turn the tv off and back on, it will sometimes reset to the horizontal lines. If you restart the xbox, it will reset to horizontal lines most of the time. With the ps3, you can set it to 1080i and keep toggling it until it works, but when the game launches it can screw up again, so it's best to have the xbox on and ready with a component switch so you can fix it with the xbox then switch back to the ps3. I think the cable that comes with the tv for HD input (the component plugs don't work, they only support 480, but the vga looking input supports 1080i) - the cable is just poor quality and can barely handle the signal. I've been trying to find a better quality cable with no luck.

Hope this helps other people with this ancient beta HD input canadian tvness.

Dec 30, 2008 | RCA D52130 52" Rear Projection Television

1 Answer

Xbox 360 or Dish ViP 622

when i hook either my dish hd receiver up to the 1080i component video inputs, everything works fine if i set either device to 480p, but i get nothing i set them to 1080i.

Apr 09, 2008 | Mitsubishi WS-65869 65" Rear Projection...

1 Answer

Xbox 360 hd and p56926

change back to 480 resolution and them go upscaling

Feb 20, 2008 | RCA P52926 52" Rear Projection Television

1 Answer

High definition cable hookup

There is a switch on the 360 hd cables themselves it is a slider to go from TV to HD it is right where the cable plugs into the 360...switch towards 360 is tv and away is HD. Hope this is what you needed.

Feb 06, 2008 | Akai PT5250A Television

1 Answer

Hitachi 53SDX89BA HD settings

Problem more than likely with the xbox, as the output stream of data from the game platform is not always consistent...accordianman

Dec 29, 2007 | Hitachi 50UX57B 50" Rear Projection...

3 Answers

Can't get my TV to go to 1080i

Your tv is either 1080p or not 1080 compliant. Try 720p or you may be forced to keep it at 480

Dec 25, 2007 | Mitsubishi WS-55315 55" Rear Projection...

Not finding what you are looking for?
RCA D52W20 52" Rear Projection HDTV-Ready Television Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you a RCA Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides