Question about Pioneer VSX-1015TXK Receiver

1 Answer

How hard to install Main Control Assembly ( what is it?)

Hello,

Recieved my reciever back with the news I need a new Main Control Assy ( awx8604) and the bill is going to be $400. I found the part at Pioneer's website for $133. I'm very experienced in the computer field, however audio equipment is a new realm for me and I wanted to know if this is something a novice such as myself could knock out.

Do you suggest doing something like this or just going out and buying a cheap-o reciever for $200? The vsx-1015 is a fairly decent reciever and if I could do it for $133 I would like to attempt it.

-A/V Novice.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 27 Answers

NOT HARD ...JUST FOLLOW THE DIRECTION TO THE BOARD THAT YOUARE REPLACING....IT WILL SAY WHAT THE BOARD AND WHAT IT CONTROLLS ...RIGHT ON IT....FIND IT ,REPLACE , PUT BACK TOGETHER......OOOOO MAKE SHURE YOU PUT THE SCREWS AND WIRES IN AN ORDER THAT YOU CAN REMEMBER....LABELING WITH TAPE HELPS FOR MEMORY....OK
Radricktip

Posted on Dec 10, 2008

  • Rick Fermazin Dec 10, 2008

    Radricktip again

    I should say its not hard if you know how to completely assemble your stereo!!!!!!!

    if your not able to do COMPLETE assembly...VERRY FRUSTRATING When its mokes everything.

    BIG difference than computers.



    If you have the board , or not , I can use the parts for other pioneers I dont waste the money....its a 75/25 chance.



    I WILL PAY YOU FOR YOUR RECEIVER.....OK

    radricktip@gmail.com

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Not recieving notifications on bump?


DO you mean your phone is not vibrating ?

Jul 26, 2012 | Samsung Galaxy Cell Phones

1 Answer

How do you change the main door switch ***. for a Frigidaire model ATF7000FSI? We just recieved the switch assembly.


Hello, welcome to FixYa

Based on your post, "How do you change the main door switch"


Attached here is a great tutorial for accessing the assembly for testing and replacing.

http://www.repairclinic.com/PartDetail/Door-Switch-Assembly/131763202/1531974

Let me know if you need further assistance going forward or if anything is not clear.

Thank's again for visiting FixYa today. Good luck.

Regards,

Macmarkus :)

Jun 18, 2011 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Hello, I just recieved a email from Amazon about a new update, I switched my Kindle from 3G to wi fi and recieved the update. How do i switch back to 3G? Thank you


It will automatically use whatever connection is best, so if you have a wireless connection configured, it will use that, but once you are out of range of any configured wireless network, it will use 3G connection.

Feb 28, 2011 | Amazon Kindle 3G

1 Answer

I have problem heating the back seat section, the blowers are ok, but only cold air comes out. Please help!


Check and see if some one has bypassed heater core hoses. If they have theirs a goo bet the heater core leaked and needs replacement befor new hoses can be installed. Depending on year there is a valve in heater core line that tells hot water to flow it maybe stuck or no signal to valve is being recieved. If its operated by a vaccume hose make sure its not broken. This may require you access the heater control panel in dash make sure vaccume is being recieved and that hose to heater valve holds vaccume. If vehicle is a later model then control panel maybe electronic and electrical diagrams necessary to futher diag.

Jan 10, 2011 | Pontiac Montana Cars & Trucks

1 Answer

I just replaced the main board in my GE Side by Side. After a week and a half the coils have heavy frost and ice build up. What can be the problem now?


Check the installation instructions that you recieved that was with the control board. Some models require a resistor to be cutt out of the board. MODEL SENSITIVE.

Aug 29, 2010 | Refrigerators

1 Answer

I purchase microsoft home and student 2007 and recieved a back up copy by post my hard drive crashed and has been replaced the the disks have NO 25 digit product key on it.


Hello

Unfortunately this is a matter you will have to clear with Microsoft themselves. You will need to explain the situation to them, and they will be able to give you a new product key.

At the link below you will be directed to Microsoft's help desk.
Click HERE.

Hope this can be of help.

Kind regards
Andrea

Aug 26, 2010 | Computers & Internet

1 Answer

Sony-DCR-21 E61:11 Error


Hi again,
E:61:11 shows that flexible wire of lens assembly is not inserted in camera main board connector properly.
There are two flexible wires from lens assembly in this camcorder, just check them and make sure both are plugged in main board connectors correctly.
This will solve your problem.
Thanks.

May 05, 2010 | Sony Handycam DCR-HC21 Mini DV Digital...

2 Answers

I just recieved my new Cect I9 phone, Not enough memory


Has anyone answered you on this issue? I have the same problem.

Feb 10, 2010 | Cell Phones

1 Answer

I never recieved instructions on the watch.is there anyway that i can recieve it, or where do i go about doing that?


Hello,

Here is a link to the manual you need.

Deep 300 manual

Once you open it, use the menu to Save a copy to your hard drive for future reference.

Thanks for using Fixya.

Oct 06, 2009 | Quicksilver Quiksilver - DEEP 300 - SILVER...

1 Answer

INSTRUMENT CLUSTER DASH LIGHTNING


dash cluster assembly needs replacement/try used one or go to dealer and spend 90.00 for diagnoisis if you have to buy new no return on electrical parts

Nov 06, 2008 | 2001 Chrysler PT Cruiser

Not finding what you are looking for?
Pioneer VSX-1015TXK Receiver Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5554 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Ian Summerfield
Ian Summerfield

Level 3 Expert

502 Answers

Are you a Pioneer Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...