Question about Sony BRAVIA KDL-V32XBR1 32 in. LCD HDTV
My Sony XBR 60" is only a few years old. When powered up, the "STANDBY" light just blinks on and off continuously, with no picture or sound. Any suggestions would be appreciated.
Check the door for the lamp...over time mine distorted from the heat, and this was an error code for the door now being closed. Temporarilty I wegeded something in there to hold the switch closed, but ended up replacing the door.
Posted on Mar 14, 2008
Tips for a great answer:
Sep 23, 2014 | Sony BRAVIA XBR 52 in. LCD Flat-Panel HDTV
Apr 06, 2014 | Flat Panel Televisions
Sep 03, 2012 | Sony Google TV NSX-32GT1 32 in. LCD HDTV
Apr 05, 2012 | Sony XBR-52HX909 52 in. HDTV-Ready LCD TV
Aug 25, 2011 | Sony KDF-E42A10 42 in. LCD Television
Jul 28, 2011 | Sony KDF-E60A20 60 in. LCD HDTV
Jun 19, 2011 | Sony BRAVIA KDL-40V3000 Television
Standby/Power light of the TV blinks when there is any internal malfunction in
the TV. The self-diagnostic function of the TV will cause the STANDBY light to
blink or flash when the television detects an issue. The number of times the
STANDBY light flashes corresponds to a specific issue.
examples are given below; some of the issues may be resolved without the need
1 blink / 2 blinks / 5 blinks: - This indicates that there may be a power-related problem with your set.
3 blinks: - This indicates that there may be a power-related problem with your set. The set will need to be serviced to allow a technician to determine the specific issue that needs to be repaired. If the power light flashes three times in sequence in a Lamp TV, the lamp cover is not securely attached. Reattach the lamp cover to resolve this issue.
4 blinks: - This indicates that there may be a back light or lamp power problem.
6 blinks: - This indicates that there is some kind of audio problem with your set.
7 blinks: - This indicates that there is a temperature problem with your set. Please check to make sure that the air vents on the sides and back of the set are not blocked or clogged and there is adequate ventilation around the television. We recommend that you check and clean the vents periodically to make sure the set receives adequate air flow. If the problem continues, the set will need to be serviced.
8 blinks: - This indicates that there may be a video-related problem with your set. If the flash sequence is not listed above or the light continues to flash, follow the steps below to perform a power reset:
Try the following steps to check if the issue can be resolved.
Turn off the television.
Unplug the television power cord from the electrical outlet.
Let the television remain without power for 60 seconds.
Plug the power cord back into the electrical outlet.
the television is plugged into a power strip or surge protector, remove it from
the power strip or surge protector and plug it directly into the wall outlet.
If the issue is resolved, the problem is with the power strip or surge
protector and not the television.
the issue continues to occur, service may be required.
for using Fixya.
Mar 02, 2011 | Sony KDF-E42A10 42 in. LCD Television
Dec 13, 2010 | Sony Bravia XBR-52HX909 52 in. LCD HDTV
Jun 15, 2009 | Sony KDF-E60A20 60 in. LCD HDTV
567 people viewed this question
Usually answered in minutes!