Question about Maytag MDB7100AWB Dishwasher

1 Answer

Maytag legacy series 3 yr's old

The functions on my dish washer for start will not work all the other functions do any help it;s a quiet series 200

Posted by on

  • 1 more comment 
  • Anonymous Dec 28, 2007

    same here

  • Anonymous Jul 30, 2008

    I am having the same problem. All the other lights light up, but when you press the start button nothing happens.

  • bigmulls Jan 03, 2009

    this just started to happen to me. Only start button will not work

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I had a similar problem where slowly specific buttons stop working. Moisture was getting into the control board and slowly killing buttons. I replaced the control board and that worked for another year, until the buttons began dying again.

For now, there are other ways to start the machine, but you just have to let time expire to stop it. It is probably a control board issue.

Posted on Dec 31, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Maytag legacy series washer


The drive motor which spins the drum is connected to the drum by a rubber belt. Sounds like the belt is burned through. Make sure you can spin the inside tub by hand to verify that the tub can turn freely before you replace the belt. The hum is from the drive motor just spinning freely.

If you need further help, reach me via phone at https://www.6ya.com/expert/steven_a67ead41eb5fc62a

Sep 02, 2016 | Maytag Legacy Series Top Load Washer

1 Answer

How do I clean my Maytag Legacy Series Quiet Series 200


Hi,

Here is a tip that will help you with how to clean that dishwasher up and get it smelling good again...

Dishwasher Maintenance
heatman101

Apr 20, 2011 | Maytag Dishwashers

3 Answers

1.5 year old Maytag Legacy Series Quiet Series 300 Lock Light on


Hold down the heated-dry button for 3 seconds and the light will clear.

Nov 07, 2009 | Maytag 24 in. MDB9750AW Dishwasher

4 Answers

Maytag Quiet Series dishwasher won't start


Sounds like you have a bad Control Board

http://www.partstore.com/Part/Maytag/Maytag/MDB6600AWW/Maytag/Maytag/99003160/New.aspx

But with the price it cost, you might be better off buying a new dishwasher, preferably a different brand, cause that washer has some bad reviews

Oct 12, 2009 | Dishwashers

1 Answer

Our Maytag quiet series 200 does not clean or rinse dishes properly. It leaves film all over cups and dishes. Water also seems not to be draining out. It is 6 years old


It is not the dishwasher. The problem is hard water. There is a new product out called the dishwasher filtration system. It filters the water before it enters your dishwasher. It works amazing and has a money back guarantee. You will love the way your dishes look after the first load. It is also very affordable (like 70 bucks). Go to www.dishwasherfilter.com to find out more info.

Sep 07, 2009 | Maytag Dishwashers

1 Answer

Maytag quiet series 200 Legacy not cleaning


under the unit where the water line connects,this is where the filters are.disconnect the water line take the fitting off that the line was hooked to,screen is there under fitting.

Jul 15, 2009 | Bosch 24 in. SGS43C12 Classixx...

2 Answers

Maytag Quiet Series 100, Model # MDB5600AWS, built in dishwasher. Does not get the dishes clean, dishes stay dirty after multiple cycles of washing. Please help!


We also have a Quiet series 100 and had the same problem, the dishes always came out dingy or with food all over them. My washer is about 5 years old and worked well for about 4 of them but the last year has been doing a poorer and poorer job washing the dishes. I finally broke down and removed the racks and all of the plastic parts from the inside of the washer. Doing this revealed that the groves in the under side of most of the plastic parts was clogged with food and debris. After a good scrubbing with water and a brush then reassembly it worked like a new washer again, cleaning the dishes very well and the best part is it saved us about $700.00 for another washer.

Jun 20, 2009 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Maytag Quiet Series 200 Electric Dryer


I also had a similar problem with my maytag dryer which is 3 1/2 years old. It was the idler lever assembly with pulley. The part number is 11222607JG and the cost is about $20.00. Hope this helps.

Apr 04, 2009 | Maytag Dryers

6 Answers

Grinding noise for maytag quietseries 200 usually when it first starts up


I had the same problem with my Maytag Quiet Series 1 dishwasher until I read the comment left by the guest on June 1, 2008. I tried his suggestion about the rinse cap adjustment and WOW it WORKED. No more growling noise. Thanks you saved me a service call.

Apr 06, 2008 | Dishwashers

Not finding what you are looking for?
Maytag MDB7100AWB Dishwasher Logo

431 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Carmen Mikulic

Level 2 Expert

415 Answers

Charles T Nevin
Charles T Nevin

Level 3 Expert

4070 Answers

Are you a Maytag Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...