Question about Microsoft Xbox 360 Console

1 Answer

Wont read cds and tray opens on it own

Anything new about the cd tray?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 4,402 Answers

Bad Cdrom/dvd
The laser going bad is a pretty common issue with the drives, since it's a Hitachi that spindle motor could be all gunked up with dirt as well and cause that issue also.
if ya have a Hitachi, if it's a Samsung it could just be the laser.

Posted on Dec 12, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Hi! I have a problem for reading CDs with an aiwa hifi system

the spindle motor goes bad a lot on these aiwa cd unit

May 12, 2010 | Aiwa NSX-DS55 CD Shelf System

1 Answer

Durabrand W600-S cd tray wont open

Hello, this kind of repair requires certain skils and knowledge about the cd changer mechanism. Please claim for an in warranty repair or replacement of the system. If you need more info please advice. Arpi

Jul 16, 2007 | Durabrand W600 Shelf System

1 Answer

It doesnt open and cant read the cds inside.

Remove the cover lid and look inside for anything jamming disk tray, problem may be very simple once you look at this. change out some of the cds.

Apr 09, 2010 | JVC XL-F254BK 5-Disc CD Changer

1 Answer

Xbox wont read discs

All CD Players and DVD players work basically the same. way.

When you close the tray a tiny micro-switch makes contact telling the player it is ready to read a disc.

Your switch has either failed or is out of alignment.

The unit has to be taken apart. The switch needs to be adjusted or replaced. The switch is a 69¢ part.

Dec 05, 2008 | Microsoft Xbox 360 Console

1 Answer


if under warranty, send for repair.

No warranty, open it yourself and try to open the cd tray/door. remove anything stuck between the tray/door or wriggle the tray/door.

Aug 23, 2008 | Sony Audio Players & Recorders

2 Answers

I have a problem with my CD player

hi no1angel4u, there seem to be a dirty lens issue.try clean it with a lens cleaner cd its not much of a hassle.have a nice time.n hope your prob gets solved nice n quick.

May 11, 2008 | Audio Players & Recorders

1 Answer

CD tay won't open

If you had any cds inside, you can open the case and see whether there's any cd jammed, with the power switch off! If you didn't have any cds inside, open the case anyway and check if the tray opens or not!!!

Hope it goes well!!

Apr 04, 2008 | RCA RS2653 Shelf System

1 Answer

Jammed cd player

You can fixed the alignment of the disk tray of the CD player. But its pretty cool if the repairman in your nearest location would you let do the job.

Jan 06, 2008 | Audio Players & Recorders

1 Answer

My disk tray

Open thje device manager try uninstall and install again.

Jan 03, 2008 | Mad Dog Multimedia (MD16XDVD9) DVD±RW...

4 Answers

Tray error

I saw on another JVC systems manual that its an error message that shows when the tray isn't fully open due to an obstruction. If you can locate a manual eject button(usualy you'll need to insert some tip into it) it will help you eject the tray and look for any obstructions, anything looking out of the ordinary there. at least that way you'll be able to take your cds out... You can also try disconnecting the system from all power sources for a few days(including an internal battery), maybe the reset will jog it back to working order. If you're out of warranty and know your way around those things, try taking it apart, cleaning as much as you can, and look for anything out of the ordinary, like broken gears or pins, bent parts, a cog, etc. Good luck

Feb 12, 2006 | JVC FS-S77 System

Not finding what you are looking for?
Microsoft Xbox 360 Console Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Video Game Consoles & Games Experts

Tre Elkins

Level 3 Expert

643 Answers

Martin Murray

Level 3 Expert

1623 Answers

Stu Morris K

Level 2 Expert

178 Answers

Are you a Microsoft Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides