I have a Minolta model EP4050 and all of a sudden the display panel will not display. The copier works but I cannot see the display...it just lights up with the blue background light and that's it. Do I need a new display panel or can this issue be fixed? And where would I get a display panel for this? Thanks for any help
Sounds like the display HAS gone bad. I doubt a new one can be ordered. The best bet is to find a Minolta - Konica-Minolta dealer and they may have one in their graveyard.
stops feeding paper at start of printing and repeatedly states there is a paper jam. why wont it...
(More)
stops feeding paper at start of printing and repeatedly states there is a paper jam. why wont it feed and how do I get paper out as it is a sealed unit. initially paper was feeding too far thr so printing 'between' s pages, now feeding first sheet thro and then jamming
My citizen ct-s300 printer is blinking an error message, 3 short blinks followed by one long. ...
(More)
My citizen ct-s300 printer is blinking an error message, 3 short blinks followed by one long. Someone else asked the same question and you said it was a bad main PCB and to send it in for repair. what is a bad main PCB, what's a PCB? The owners manual says that this error could mean either a "low voltage error" or a "abnormal CPU operation error." Any suggestions other than send it in for repair?
I took cartridge 31 off the printer (Lexmartk X5450) several times to clean it with ink cleaner (it...
(More)
I took cartridge 31 off the printer (Lexmartk X5450) several times to clean it with ink cleaner (it wasn't used for some time and black ink didn't run) and the printer started displaying message ''incorrect cartridge''.