Question about Dell Latitude D600 Notebook

1 Answer

Choose program to open with .... comes when i double click the hard disk partitions in MY computer

Well i have scanned my computer and there is no virus. i had the similar problem with my other computer but scanning the virus helped and that one is working.
but in this computer, when i right click the partition icon, it shows "open" options and clicking it also help.

and double clicking the icon asks me to choose program to open with.

kindly help me out please

Posted by on

  • daffodil234 Dec 15, 2007

    thank u so much ... it helped ....

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 49 Answers

Download a43 a file manager
run a43.exe and use it to explore your computer
check the "hidden file" option and look for an autorun file
delete the autorun file reboot and check with a43 again
if the autorun.inf file is still present on your harddisk then you have an infection\\

get back to me

Posted on Dec 12, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When i putting password in my samsung hard disk ,the computer switch off.and now i can't open my hard disk to i use it ..


You can gain access to a working hard drive that is inaccessible when the system starts and assign it a drive letter under the Windows Explorer interface. Or, you can import foreign disks into Windows or create a partition and format them. You can scan a drive for bad sectors or lost clusters and repair the system files to allow access to a corrupted drive. In short, you can utilize the drives as they were intended to be used by completing some operating-system configuration steps that are occasionally required for some drive installations.

Click "Start" (the Windows Orb) and "Computer" to access the Windows Explorer screen. Right-click on the inaccessible drive and choose "Properties" from the context menu. Click the "Tools" tab and click "Check Now" under the Error-Checking section. Select both check boxes to allow the system to automatically fix file-system errors and to scan for and attempt recovery of bad sectors. Allow the system to run the scan the next time the system is booted. Restart the computer to complete the scan and check for access after the scan completes. Click "Start" (Windows Orb) and "Computer" to access the Windows Explorer screen. Right-click on the inaccessible drive and choose "Properties" from the context menu. Click the "Security" tab and click "Edit" to change permissions for the drive. Click "Users" from the Group or User Names section. Check the "Allow" box for full control and check for access after the settings are saved. Click "Start" and "Control Panel" and then click "Administrative Tools" and double-click "Computer Management" to launch the utility. Click "Disk Management" to display a list of all detected drives in the system. Right-click in the left column of the inaccessible drive and click "Import Foreign Disk" to allow the system to convert the disk signature to a local disk. Check for access after the settings are saved. Click "Start" and "Control Panel" and then click "Administrative Tools" and double-click "Computer Management" to launch the utility. Click "Disk Management" to display a list of all detected drives in the system. Right-click in the right column of the inaccessible disk and choose "Change Drive Letters and Path." If no letter exists, click "Add" and assign a drive letter from the list of available letters. If a drive letter is listed, click "Change" and select a new letter to eliminate any conflicts with other devices in the system. Check for access after these settings are in place, which may require a restart of the system. Click "Start" and "Control Panel" and then click "Administrative Tools" and double-click "Computer Management" to launch the utility. Click "Disk Management" to display a list of all detected drives in the system. Right-click in the right column of the inaccessible disk and choose "New Simple Volume" to create a partition and format it for use. Click "Next" when the New Simple Volume Wizard appears. Click "Next" to accept the maximum for the drive. Click "Next" to accept the suggested drive letter assignment. Click "Next" to format the volume with the suggested defaults or change them if desired. Click "Finish" to format the drive and make it accessible to the operating system.

Feb 02, 2013 | Samsung G2 Portable External HX-MU032DC/...

Tip

How to make an Image of your HDD Partition


<p>Backing up your computer is extremely important. Without it, it would be a hard drive failure or corrupted file may cause that you lose all your data. When these disasters may also lose valuable time in the operating system and reinstall the software before returning to work. Avoid loss of data and loss of time by an image from your hard disk or partition. When a problem occurs, the train ensures their unit begins to replace the computer and continue working. <br /> <p><br /> <p>1. Install the image or backup software. If the software is downloaded, double click the downloaded installation file and follow the instructions on the screen. If you have the boxed version, insert the CD into the drive and follow the onscreen instructions. <br /> <p><br /> <p>2. Connect your external hard drive and open the software by double clicking the icon on your desktop. If there is no icon on your desktop, click Start, Programs, and click the name of open source software. <br /> <p><br /> <p>3. Click "Backup Drive" near the center of the screen in the software. <br /> <p><br /> <p>4. Click on "Switch to partition" in the upper right corner of the screen only one partition, or click the "Switch on your hard disk to back up the entire disk. <br /> <p><br /> <p>5. Check the boxes next to the disk you want to record to select. <br /> <p><br /> <p>6. Choose your external hard disk in the "Target" box in the middle of the screen and "Back Up Now" click the button below to start the backup process. <br /> <p><br /> <p>7. Separate additional hard disk and place in a safe place, ready with the primary hard drive in case of emergency. <br />

on Jun 22, 2011 | Computers & Internet

1 Answer

How to unlock a partition on a flash drive


Hidden partitions on hard drives and USB flash drives store files, recovery and utility software. Many personal computer manufacturers use a hidden partition for the recovery software and no longer ship software CDs. Some people use hidden partitions to store files, which contain sensitive, illegal or private data. Since most USB flash drives are marked with the drive , you can check for differences between this marking and the capacity reported for the drive. A Any significant disparity may indicate the presence of a hidden partition.

Log on to the computer as an administrative user. Click the "Start" button. Select "Control Panel." Double-click the "Administrative Tools" icon. Open "Computer Management." Click on the "+" beside "Storage." Select "Disk Management." The hidden partitions do not have drive letter assignments and are shown in the "Disk 1" or "Disk 2" areas. The "Disk 0" area is usually used by your boot drive or the C:/ drive. A read-only partition on a flash drive may show up in the "CD-Rom" area. Step 4. Right-click on the hidden partition. Choose "Change Drive Letter and Paths." Click "Add." Select a drive letter to use. Click "OK." Click on the red "X" in the upper right corner of the "Computer Management" window to close it. Double-click on "My Computer" on the desktop. Double-click on the drive letter you selected in Step 4 to open the drive and view the files. Hope this helps.

Jan 17, 2013 | Kingston Electronics - Others

1 Answer

I have got a big problem for my wdc wd6400aaks hard disk. Few months ago i separated hard disk into 4 partition (named as DATA, Install, Slave and Local disk). But XP2 had auto numbered my partitions and...


Hi, Thanks for using fixya.

Right click on My Computer/Computer choose manage. On the left side make sure storage is expanded double click disk management, on the lower part find your Drive you want to change right click on it choose change drive letter and paths. Click on change, You will see a drop down arrow click that choose the first available letter, Now click on change. Do this to all of the drives you want to change Open My Computer/Computer see if it is now listed the way rou want it.

Ps you can't change the c drive if it is used as the operating system storage.

Terry

Feb 13, 2011 | Gateway (M520HD80G) Hard Drive

1 Answer

I bought a 250gb hard drive that plugs into the usb on my xbox. it came wit a disc that i plugged into my computer ran the program like it told me to. then when i tried to plug it into the back of my xbox...


Your problem is the hard drive is formatted as "NTFS". Dont worry its not complicated. All I am talking about is the method in which the hard drive stores data.

Your Hard Drive needs to be "FAT32".

PLEASE SAVE ALL YOUR FILES OFF OF THE HARD DRIVE

Right click My Computer - > Manage - > Select Disk Management under Storage.

Here you can remove the NTFS partition and recreate it using FAT32.

When you go into Disk Management, right click the partition and choose Delete Partition. Make sure its ont he right Hard Drive! Double check. Then right click in the blank space and choose Create New Partition (I think that's it). Then right click the new partition and choose Format. Select Fat32 for File System. At that point you should be done.


Apr 26, 2010 | Microsoft Xbox 360 Pro System Console

1 Answer

Slow


Hi Whose,

Me again :-)
Yes m8, there is something you can do.

Perform the steps given below to increase your system performance.

Uninstall all unwanted software:
To uninstall software
Click on Start
à Settings à Control Panel à Add/Remove Programs
Select the software (one at the time) from the list and click on the Add/Remove button and follow the online screen instructions.

Erase unnecessary files in the windows temp folder.
Double Click My Computer.
Double Click the drive where windows are installed. This is typically drive C.
Double Click the windows folder. This is typically C:\Windows.
Double Click the temp folder. This is typically C:\Windows\temp.
Press control A to select all files and folders.
Press the delete key.
If confirmation is asked to delete these files choose yes to all.


Defragment hard disk.
Close all applications.
Disable your screen saver.
Disable all the programs on the taskbar if possible.
Click Start.
Click Program.
Click Accessories.
Click System Tools.
Click Defrag.
Select the drive to defrag.

You should defrag every hard disk on your system.
This process can take quite some time.
Click Ok.
Enable your screen saver.


Remove Startup programs (if you know what you are doing)
Click Start
Select Run
Type msconfig in the text box
The "System Configuration Utility" window will open

A list of programs will be shown each having a checkbox to the left of the name.
Click on the checkbox to enable the program (so it runs when windows boots) and click a second time to Uncheck the box to disable the program (so it does not run when windows boots).


Set the size of the virtual memory (swap file) to a constant optimal size.
Right click My Computer
Click Properties
The System Properties window lists the amount of RAM in your PC
Click Performance
Click Virtual Memory
Click Let me specify my own virtual memory settings
Click the arrow next to the hard disk.
Here are some guidelines to choose the best location for your virtual memory file
a) Select the quickest hard disk.
b) If you have, two hard disks that are similar in performance select the hard disk that does not contain Windows system files (usually C:).
c) Make sure the drive has free space equal to at least twice the size of the recommended swap file size.
d) If the partition is on the same physical drive, select the partition in alphabetical order. For example, if you have one 20GB hard disk and you partition it into two 10GB partitions drive C & D) You should pick Drive C over Drive D if meets all the guidelines of a, b & c.

Set the Minimum/Maximum to: With large hard disks settings at least 128mb or 256mb swap file should be sufficient in almost every situation.
Note: The amount of RAM plus the size of the virtual memory file is the maximum amount of RAM you can use at once.
Click OK.
After setting the size of the virtual memory file windows will display the following message. You have chosen not to let windows manage virtual memory automatically.
Click Yes.
You must restart your computer before the new settings will take effect. Do you want to restart your computer now?

Click Yes


Next :-) please vote if this help you

Dec 11, 2008 | HP Compaq nx6110 PC Laptop

2 Answers

Computer is slowing down


Hi Big Bad Bob, and welcome to FixYa,

you computer is "dirty", clean, and feel the difference:

Uninstall all unwanted software:
To uninstall software
Click on Start
à Settings à Control Panel à Add/Remove Programs
Select the software (one at the time) from the list and click on the Add/Remove button and follow the online screen instructions.

Erase unnecessary files in the windows temp folder.
Double Click My Computer.
Double Click the drive where windows are installed. This is typically drive C.
Double Click the windows folder. This is typically C:\Windows.
Double Click the temp folder. This is typically C:\Windows\temp.
Press control A to select all files and folders.
Press the delete key.
If confirmation is asked to delete these files choose yes to all.


Defragment hard disk.
Close all applications.
Disable your screen saver.
Disable all the programs on the taskbar if possible.
Click Start.
Click Program.
Click Accessories.
Click System Tools.
Click Defrag.
Select the drive to defrag.

You should defrag every hard disk on your system.
This process can take quite some time.
Click Ok.
Enable your screen saver.


Remove Startup programs (if you know what you are doing)
Click Start
Select Run
Type msconfig in the text box
The "System Configuration Utility" window will open

A list of programs will be shown each having a checkbox to the left of the name.
Click on the checkbox to enable the program (so it runs when windows boots) and click a second time to Uncheck the box to disable the program (so it does not run when windows boots).


Set the size of the virtual memory (swap file) to a constant optimal size.
Right click My Computer
Click Properties
The System Properties window lists the amount of RAM in your PC
Click Performance
Click Virtual Memory
Click Let me specify my own virtual memory settings
Click the arrow next to the hard disk.
Here are some guidelines to choose the best location for your virtual memory file
a) Select the quickest hard disk.
b) If you have, two hard disks that are similar in performance select the hard disk that does not contain Windows system files (usually C:).
c) Make sure the drive has free space equal to at least twice the size of the recommended swap file size.
d) If the partition is on the same physical drive, select the partition in alphabetical order. For example, if you have one 20GB hard disk and you partition it into two 10GB partitions drive C & D) You should pick Drive C over Drive D if meets all the guidelines of a, b & c.

Set the Minimum/Maximum to: With large hard disks settings at least 128mb or 256mb swap file should be sufficient in almost every situation.
Note: The amount of RAM plus the size of the virtual memory file is the maximum amount of RAM you can use at once.
Click OK.
After setting the size of the virtual memory file windows will display the following message. You have chosen not to let windows manage virtual memory automatically.
Click Yes.
You must restart your computer before the new settings will take effect. Do you want to restart your computer now?

Click Yes

regards

Yeis the Wiz -> vote :-)

Dec 06, 2008 | Computers & Internet

2 Answers

My C:\drive is full and i have removed files to make space but it stil says there is not enough space on drive. What can i do?


Copy this text into a word document, print it and have it next to you when you ferform this:

Perform the steps given below to increase you system performance and clear space.

Uninstall all unwanted software:
To uninstall software
Click on Start -> Settings -> Control Panel -> Add/Remove Programs

Select the software (one at the time) from the list and click on Add/Remove button and follow the online screen instructions.

Erase unnecessary files in the windows temp folder.
Double Click My Computer.
Double Click the drive where windows are installed. This is typically drive C.
Double Click the windows folder. This is typically C:\Windows.
Double Click the temp folder. This is typically C:\Windows\temp.
Press control A to select all files and folders.
Press the delete key.
If confirmation is asked to delete these files choose yes to all.


Defragment hard disk.
Close all applications.
Disable your screen saver.
Disable all the programs on the taskbar if possible.
Click Start.
Click Program.
Click Accessories.
Click System Tools.
Click Defrag.
Select the drive to defrag.

You should defrag every hard disk on your system.
This process can take quite some time.
Click Ok.
Enable your screen saver.


Remove Startup programs (if you know what you are doing)
Click Start
Select Run
Type msconfig in the text box
The "System Configuration Utility" window will open

A list of programs will be shown each having a checkbox to the left of the name.
Click on the checkbox to enable the program (so it runs when windows boots) and click a second time to Uncheck the box to disable the program (so it does not run when windows boots).


Set the size of the virtual memory (swap file) to a constant optimal size.
Right click My Computer
Click Properties
The System Properties window lists the amount of RAM in your PC
Click Performance
Click Virtual Memory
Click Let me specify my own virtual memory settings
Click the arrow next to the hard disk.
Here are some guidelines to choose the best location for your virtual memory file
a) Select the quickest hard disk.
b) If you have, two hard disks that are similar in performance select the hard disk that does not contain Windows system files (usually C:).
c) Make sure the drive has free space equal to at least twice the size of the recommended swap file size.
d) If the partition is on the same physical drive, select the partition in alphabetical order. For example, if you have one 20GB hard disk and you partition it into two 10GB partitions drive C & D) You should pick Drive C over Drive D if meets all the guidelines of a, b & c.

Set the Minimum/Maximum to: With large hard disks settings at least 128mb or 256mb swap file should be sufficient in almost every situation.
Note: The amount of RAM plus the size of the virtual memory file is the maximum amount of RAM you can use at once.
Click OK.
After setting the size of the virtual memory file windows will display the following message. You have chosen not to let windows manage virtual memory automatically.
Click Yes.
You must restart your computer before the new settings will take effect. Do you want to restart your computer now?

Click Yes


Next :-) please vote if this help you

Nov 30, 2008 | Acer Computers & Internet

1 Answer

My computer needs a clean out.


Perform the steps given below to increase you system performance.

Uninstall all unwanted software.
To uninstall software:
Click on Start -> Settings -> Control Panel -> Add/Remove Programs

Select the software (one at the time) from the list and click on Add/Remove button and follow the online screen instructions.

Erase unnecessary files in the windows temporary folder.
Double Click My Computer.
Double Click the drive where windows are installed. This is typically drive C.
Double Click the windows folder. This is typically C:\Windows.
Double Click the temp folder. This is typically C:\Windows\temp.
Press control A to select all files and folders.
Press the delete key.
If confirmation is asked to delete these files choose yes to all.


Defragment hard disk.
Close all applications.
Disable your screen saver.
Disable all the programs on the taskbar if possible.
Click Start.
Click Program.
Click Accessories.
Click System Tools.
Click Defrag.
Select the drive to defrag. You should defrag every hard disk on your system. This process can take quite some time.
Click Ok.
Enable your screen saver.


Remove Startup programs (if you know what you are doing)
Click Start
Select Run
Type msconfig in the text box
The "System Configuration Utility" window will open

A list of programs will be shown each having a checkbox to the left of the name.
Click on the checkbox to enable the program (so it runs when windows boots) and click a second time to Uncheck the box to disable the program (so it does not run when windows boots).


Set the size of the virtual memory (swap file) to a constant optimal size.
Right click My Computer
Click Properties
The System Properties window lists the amount of RAM in your PC
Click Performance
Click Virtual Memory
Click Let me specify my own virtual memory settings
Click the arrow next to the hard disk.
Here are some guidelines to choose the best location for your virtual memory file
a) Select the quickest hard disk.
b) If you have, two hard disks that are similar in performance select the hard disk that does not contain Windows system files (usually C:).
c) Make sure the drive has free space equal to at least twice the size of the recommended swap file size.
d) If the partition is on the same physical drive, select the partition in alphabetical order. For example, if you have one 20GB hard disk and you partition it into two 10GB partitions drive C & D) You should pick Drive C over Drive D if meets all the guidelines of a, b & c.

Set the Minimum/Maximum to: With large hard disks settings at least 128mb or 256mb swap file should be sufficient in almost every situation.
Note: The amount of RAM plus the size of the virtual memory file is the maximum amount of RAM you can use at once.
Click OK.
After setting the size of the virtual memory file windows will display the following message. You have chosen not to let windows manage virtual memory automatically.
Click Yes.
You must restart your computer before the new settings will take effect. Do you want to restart your computer now?

Click Yes


Next :-) please vote if this help you

Nov 29, 2008 | Computers & Internet

2 Answers

Gateway mx6930 laptop freezes up every 10 minutes - keyboard and mouse become inoperable


Perform the steps given below to increase you system performance.

Uninstall all unwanted software.
To uninstall software:
Click on Start -> Settings -> Control Panel -> Add/Remove Programs

Select the software (one at the time) from the list and click on Add/Remove button and follow the online screen instructions.

Erase unnecessary files in the windows temporary folder.
Double Click My Computer.
Double Click the drive where windows are installed. This is typically drive C.
Double Click the windows folder. This is typically C:\Windows.
Double Click the temp folder. This is typically C:\Windows\temp.
Press control A to select all files and folders.
Press the delete key.
If confirmation is asked to delete these files choose yes to all.


Defragment hard disk.
Close all applications.
Disable your screen saver.
Disable all the programs on the taskbar if possible.
Click Start.
Click Program.
Click Accessories.
Click System Tools.
Click Defrag.
Select the drive to defrag. You should defrag every hard disk on your system. This process can take quite some time.
Click Ok.
Enable your screen saver.


Remove Startup programs (if you know what you are doing)
Click Start
Select Run
Type msconfig in the text box
The "System Configuration Utility" window will open

A list of programs will be shown each having a checkbox to the left of the name.
Click on the checkbox to enable the program (so it runs when windows boots) and click a second time to Uncheck the box to disable the program (so it does not run when windows boots).


Set the size of the virtual memory (swap file) to a constant optimal size.
Right click My Computer
Click Properties
The System Properties window lists the amount of RAM in your PC
Click Performance
Click Virtual Memory
Click Let me specify my own virtual memory settings
Click the arrow next to the hard disk.
Here are some guidelines to choose the best location for your virtual memory file
a) Select the quickest hard disk.
b) If you have, two hard disks that are similar in performance select the hard disk that does not contain Windows system files (usually C:).
c) Make sure the drive has free space equal to at least twice the size of the recommended swap file size.
d) If the partition is on the same physical drive, select the partition in alphabetical order. For example, if you have one 20GB hard disk and you partition it into two 10GB partitions drive C & D) You should pick Drive C over Drive D if meets all the guidelines of a, b & c.

Set the Minimum/Maximum to: With large hard disks settings at least 128mb or 256mb swap file should be sufficient in almost every situation.
Note: The amount of RAM plus the size of the virtual memory file is the maximum amount of RAM you can use at once.
Click OK.
After setting the size of the virtual memory file windows will display the following message. You have chosen not to let windows manage virtual memory automatically.
Click Yes.
You must restart your computer before the new settings will take effect. Do you want to restart your computer now?

Click Yes


Next :-) please vote if this help you

Nov 29, 2008 | Computers & Internet

Not finding what you are looking for?
Dell Latitude D600 Notebook Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Alun Cox

Level 3 Expert

2678 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...