I own two T41's. One has the same problem as many of you. I lift it by the bottom left area and the screen goes blank. The other one only allows the screen to be shown normally in one postion (probally a video cable problem). It looks like they are planned for 3-5 years of use and no more.
the board level soldering might be worm out for memory chip or the graphic chip. Latop does have hot issues. When it is in use, try not to move the computer. always close the clamp shell and use both hand to handle the notebook when it is in use or when it is still warm.
The chip soldering problem can be resolve by locating a local board level repair shop or technicians. It is not that difficult with experienced technicians or shops.
Was this helpful?
Yes
No
1 person thought this was helpful
Popular Solutions for IBM ThinkPad T41 PC Notebook
Have Thinkpad t41 running XP Professional. Trying to connect to netzero dialup. Get a 633 modem or...
(More)
Have Thinkpad t41 running XP Professional. Trying to connect to netzero dialup. Get a 633 modem or other device already in use. Not sure if this is a problem but the Ethernet indicator light is always solid yellow with nothing connected to the port. Have another lap top that I can connet to net zero using the same phone cable. No Ethernet lights are on. Netzero properties shows the Agere Systems AC 97 modem is using Com 3. When I look at device manager it only shows LPT1 & Com 1. The computer that connect also only shows LPT 1 & Com 1, so not sure thats a problem. Any help appreciated! Don
I had this T41 for 4 years. The only thing I've changed is an additional 512MB memory which was...
(More)
I had this T41 for 4 years. The only thing I've changed is an additional 512MB memory which was installed 3 yrs ago and hasn't brought any problems. All the other parts are untouched. The keyboard did get tortured by a few times of coffee spilling, but it survived. Recently my T41 had start to halt (being unresponsive to keyboard and track point actions) during running Windows XP, and then got back to normal. Starting from last week, it won't start and halted at the BIOS start screen. Then in the rare case it did get through, it would halt often while running Windows. I suspect it is due to the keyboard and the track point, but not sure. Could anyone give me any suggestions how to solve it? Thank you very much.