Question about Pentax Optio S Digital Camera

1 Answer

A90 just appears after switching on.


It was working perfectly , but the battery low indicator would come up for the wrong reason. I did press the battery in a bit harder than usaul to make sure I got a good contact, and apart from one brief instant, the display has never worked again, nor will it take pictures.
Do I need to load file fwdc110p.bin to sort it? If so where do I get it from and how do I proceed.
Am tempted to try a smart tap - a new one I have read about just now, but I am not convinced it is the right thing to do!!

Posted by on

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the same problem.
After starting up 20 or 25 times with the fwdc110p-file the problem was fixed.

Posted on Mar 04, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It reads codes po300 po300 po522 but it runs perfect sometimes I need to press fuel pedal to start?


code p 0300 refers to random/multiple cylinder misfires detected ===causes spark plugs ---HT leads ---injector/s--ignition coil/s---low compression---wiring
code p 0522 refers to engine oil pressure sensor/switch--low voltage ===causes wiring short to ground ---engine oil pressure sensor /switch---ECM
for the first code having to alter the accelerator position ( which tells the ECM to let in more fuel indicates either a low pressure in the fuel manifold or that the injectors need cleaning
At high way speeds when the engine appears to be running good , it is still possible to have random misfires caused by low fuel pressures and /or dirty injector tips
It would be a good idea to check the oil pressure with a mechanical gauge ,then replace the oil pressure sensor/switch

Sep 26, 2015 | Cars & Trucks

1 Answer

Karbonn a90 pattern lock


Karbonn A90 hard reset 1. Charge the battery 100%. 2. Turn off your KArbonn Andorid phone. Turn ON the device by pressing and holding the VOLUME UP key and the power key together until the phone shortly vibrates. 3. When Android system recovery menu appears, release VOLUME key. 4. Highlight wipe data/Factory reset using volume key. 5. Confirm with Power or Cancel using BACK key. 6. After hard reset is done, highlight reboot system now and confirm your selection. Note! All data will be deleted!

May 17, 2014 | ACCPAC Fax/Voice/Mobileserve for PC

1 Answer

A triangle sign with no.3 appears on the dashboard in verna vehicle


look in the handbook as i have no idea sorry ,i suspect low brake fluid but iam no doubt wrong

Oct 05, 2012 | Cars & Trucks

1 Answer

When I turn on my laptop the on button lights up and the fan starts but absolutely nothing happens. The screen still appears off. The laptop has been working perfectly so not sure what might be wrong.


1. Check your power cord & adapter.
2. If its working then check the battery, reseat the battery & check.
3. If available then check with another battery
4. If no, then remove the battery & switch on the PC in AC mode.
5. Check if battery charging indication or AC power on indication is glowing. if not then need to change ur motherboard.
6. If indication is OK, but could not power ON then check ur RAM for any loose connection or dust. clean & reinstall.
7. If still no display, connect an external monitor, check if display is comming.
8. If Display is coming then your LCD need to replace.

Aug 21, 2010 | Fujitsu AMILO PC Laptops

2 Answers

I bet you can't solve this.


We have a Canon A520 and it was having all the symptoms noted. Searched for a resolution on numerous sites including the Canon Support site. While on the Canon Support site, I found an FAQ on "How to RESET the A520". Turn camera on, find and hold MENU button for 5+ seconds until "Reset settings to default?" screen appears. Arrow over to OK and press the SET button. When we did this the battery low indicator showed, replaced batteries with standard alkaline batteries. Everything functions properly, with no additional problems for the past 5 days. I guess the camera just lost its mind and had to be defaulted and rebooted, hope this helps.

Oct 01, 2008 | Canon PowerShot A520 Digital Camera

3 Answers

A90


A- I have a Pentax Opio S hence I had to get the "fwdc110p.bin" file here:

http://www.badongo.com/file/707791


B- Drop this file on your SD Card at the root directory (same level as DCIM folder) or as described by the following link and then close your camera to OFF:

Attention: Do not load this file yet onto the camera i.e. the menu+power on procedure, follow step C first...


Important!!! Insert a fully charged battery or connect to an external power source.

C- Open the now infamous "Secret Menu" in order to re-initialize your camera prior to re-installing the new firm ware: Simultaneously press MENU + Flash symbol button + Power ON...a white screen with data written in black should show.

Then a sequence of buttons must be pressed: 2 times the focus button (flower, mountain, MF symbols button) followed by 2 toggles to the Right of the "OK" button...then press MENU once and voile...the Secret Menu appears!

Using the down toggle of the OK button, go to ROM UPDATE then go down to "SYSTEM INITIAL" and press OK. Press another OK to re-initialize your camera.

Once this has been completed, turn your camera off.

D- Load the firm ware by opening your camera with the MENU+Power ON procedure...finally this should be posting "Complete" after the "Loading" message, instead of the "Error!" that we initially kept on having.

Your camera should be working perfectly! Only thing is that you will have to redo your personal settings on it from scratch...but hey, this is much better than to wait for months to get your camera back from Pentax and save that money for your next photogenic trip!

Jan 31, 2008 | Pentax Optio S Digital Camera

1 Answer

Digital camera problem


Only Pentax Technical Help support team wil be able to tell you what A90 means There may be a FAQ for that camera on the site - have you looked?

May 25, 2007 | Pentax Optio S4 Digital Camera

1 Answer

A90 Fuse


Try JAYCAR www.jaycar.com.au take the fuse into the store. You should get something to do the job. Be aware that the fuse may have blown for a reason and may be an indication of something more serious.

Aug 10, 2006 | ViewSonic A90

2 Answers

Freeze Up


A- I have a Pentax Opio S hence I had to get the "fwdc110p.bin" file here:

http://www.badongo.com/file/707791


B- Drop this file on your SD Card at the root directory (same level as DCIM folder) or as described by the following link and then close your camera to OFF:

Attention: Do not load this file yet onto the camera i.e. the menu+power on procedure, follow step C first...


Important!!! Insert a fully charged battery or connect to an external power source.

C- Open the now infamous "Secret Menu" in order to re-initialize your camera prior to re-installing the new firm ware: Simultaneously press MENU + Flash symbol button + Power ON...a white screen with data written in black should show.

Then a sequence of buttons must be pressed: 2 times the focus button (flower, mountain, MF symbols button) followed by 2 toggles to the Right of the "OK" button...then press MENU once and voile...the Secret Menu appears!

Using the down toggle of the OK button, go to ROM UPDATE then go down to "SYSTEM INITIAL" and press OK. Press another OK to re-initialize your camera.

Once this has been completed, turn your camera off.

D- Load the firm ware by opening your camera with the MENU+Power ON procedure...finally this should be posting "Complete" after the "Loading" message, instead of the "Error!" that we initially kept on having.

Your camera should be working perfectly! Only thing is that you will have to redo your personal settings on it from scratch...but hey, this is much better than to wait for months to get your camera back from Pentax and save that money for your next photogenic trip!

Sep 13, 2005 | Pentax Optio S Digital Camera

Not finding what you are looking for?
Pentax Optio S Digital Camera Logo

Related Topics:

331 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pentax Cameras Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Geoff Hone

Level 2 Expert

69 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Are you a Pentax Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...