Question about HP LaserJet 3600dn Printer

1 Answer

Hp 3600dn The whole printed page is solid green with a small line of yellow and blue on the edges. I have reset everything, calibrated, etc....... Help!!!!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 417 Answers
Re: Hp 3600dn

Thats is the formatter board try resetting to factory defaults then restart. If doesn't work then replace main controll formatter board (Which normally means a new machine)

Thanks J

Posted on Jan 21, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Printer is printing yellow instead of red and colour is fade

The magenta has run out (red).
Replace the HP 22 tri-color cartridge.
It probably has yellow and cyan (blue) left in it, and the black is most likely working as well, but if any of the 3 colors in the tricolor cartridge run out, the whole cartridge must be replaced.
For instance, if I printed my vacation photos and there was a lot of water and blue sky in all of them, the cyan might run out long before the cartridge life expectancy.
Also, don't forget that cartridges are rated in pages printed at 5% coverage.
Since a photo is about 25% of a full page, a photo printed at full bleed (edge to edge) will only yield 32 4 X 6 inch photos from a cartridge rated at 160 pages (5X expected coverage = 1/5 the prints)

Mar 27, 2011 | HP DeskJet F380 All-In-One Printer

2 Answers

Incorect line of colour from one edge to the other

I am presuming the rest of the page prints the correct colour and this is an area in the direction of feed that is missing yellow. Try swapping the yellow and magenta drum positions and then the green text should come out a very dark blue colour. if it does then the fault is with the YELLOW drum, if there is still a noticeable Cyan stripe still then the fault will be with the LED head or engine control board.

Apr 21, 2009 | OKI C5100n Laser Printer

1 Answer


"dk" means the the life black drum is over. You need to replaced the drum and blade. Or you can replaced the whole drum cartridge. The line that you are getting from one of the blades, more likely from the black drum. Pull out all the drum check if there is toner on the drums.

Mar 20, 2009 | Sharp AR-BC320 All-In-One Led Printer

1 Answer

New HP CM2320fxi printing solid black pages

The Black Toner it came with was faulty, apparently a known issue with HP - though HP Support in the UK has asked more about the computer software though the printing was with photocopying, internal reports etc.

Nov 17, 2008 | Printers & Copiers

1 Answer

Print images look like a rainbow, going from blue to red to blue to red etc.

I am on my way to a couple of appts. I waill answer early afternoon, Joe

Oct 06, 2008 | Ricoh Aficio CL3500N Laser Printer

2 Answers

Printer not printing properly

When you changed the cartridges, the printer automatically prits a test / calibration page. This page must be placed in the scanner, then you have to press the "scan" key (the green one). It will calibrate an align the system. Then you'll be able to print.

May 03, 2008 | Printers & Copiers

2 Answers


Reinstall printer driver this normally works

Thanks J

Jan 21, 2008 | HP LaserJet 3600dn Printer

Not finding what you are looking for?
HP LaserJet 3600dn Printer Logo

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts


Level 3 Expert

93802 Answers


Level 3 Expert

7983 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides