Question about Televison & Video

2 Answers

Can not remove the number of the tv channel from the screen

I have a URC-3435 universal remote everything is tuned in okay the only problem is when I hit like any channel number it stay on the screen on the upper left hand corner.

Posted by on

  • 1 more comment 
  • jayhard Dec 24, 2007

    i have a jvc tv and the channel numbers are at the top of the screen.

  • Anonymous Jan 22, 2009

    JVC TV - Can't remove the channel number from the top right corner of the screen.

  • willietyrell Mar 14, 2009

    "can not remove the number of the tv channel from the screen"

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I found my original remote and hit display and the channel in upper right went away. Thanks

Posted on Apr 07, 2012

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

How to remove the green number three from the right corner of the tv screen without having the original remote as the cable company suggested.

Posted on Aug 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Please help. I need the code for a urc 11-7130 to tune it to my tv.


What is the brand name to your TV? If you wish to get more information, check these links. Setup procedure, and setup code list to many popular remote controls are given. Pull up older posts.
http://electro-medical.blogspot.com/
http://electrohelponline.blogspot.com/

Dec 14, 2013 | Televison & Video

1 Answer

Dish remote 2 changes channels on both tvs and dish remote 1 changes channels on both tvs


Is the receiver in dual mode? Go to the receiver, open the door, and hit the mode key. If both TVs are still showing the same thing, then the issue is not the mode.

Go to TV 2 (the one without the receiver) and make sure the TV is tuned to channel 60 or 73. If it is still showing the same thing, go to TV1 (the one with the receiver) and hit Menu, system setup, Installation, modulation (menu 6-1-5). make sure the modulation for tv2 matches which channel you put your tv2 on.

Still showing the same thing? check the back of the receiver, the RCA cables (red/white/yellow) are plugged into the TV1 ports not the TV2 ports.

Showing different things but the remote still changes channels on both tvs? Go to TV1, hit menu twice, near the bottom there are two boxes each with a number. This is the address for each remote (tv1 and tv2). On the TV2 remote hold sat until it stays lit, choose a number different than on the screen, touch pound (#), the sat light blinks three times, hit record, the number on the screen should change to match the one you typed in.

Still being silly? Call a priest, you have a poltergeist!

Oct 24, 2013 | DISH Network IR Remote Control

1 Answer

Reprogram the URC-9910 universal remote for VIZIO E3D420VX


Universal remote code to check with Vizio TV is [0081.
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand. If you want to get more details and codes to different remote controls, check this.

Dec 30, 2012 | One For All URC-9910 LCD Remote Control

1 Answer

Anyone know how to use and program a SIMA universal remote SUR-20?


On the philips universal remote, i just hit code search til light was steady, then hit tv, and hit channel up til it found the freQ then hit ok! problem solved. But my sima remote! it is touch screen and contols everything but the WIFE! i cant find any codes online for my electronics, and it is a fancy bugger model # SUR-20 AND HAS A Batch # as well 8188 its made in taiwan, and im thinking about shipping it back to them, along with a grenade! LOL

Feb 04, 2010 | Philips Magnavox Learning Universal Remote

1 Answer

Mitsubishi TV Channel Tuning/Remote Problems


To restore full functionality to your set you must replace the remote that came with set. Universals only control the most basic of functions.

Apr 27, 2017 | Televison & Video

1 Answer

Need RCA univeral remote control code for Magnavox 27MS343S


Push in and hold code search button until it stays lit, then pushed the TV button, it flashes quickly. Then hit the number zero once, then hit channel up button until tv finally changes channel. Hit the mute button once to get it to store the code.

Feb 20, 2008 | Philips Magnavox 27MS343S 27" TV

1 Answer

Only receive 2 channels.


Can you punch in the channel numbers directly to go to the channels, but just not tune to them with the Channel Up/Down buttons?
If so then try tapping the favorite button on the remote until the screen shows "favorite mode off". This mode likes to stay [or perhaps turn] on when you scan for channels, but scanning clears everything in the favorite list except for the channel you are on when you start the scan (so it seems), thus leaving only one or two channels showing up. (This happens whenever I re-scan for digitals.)
To pick out favorite channels, go into the channel menu in the tv menu and with "Favorite: Analog" or "Digital" highlighted near the top, hit OK on the remote to toggle favorite status.

Nov 28, 2007 | Mintek DTV-263 26 in. TV/DVD Combo

3 Answers

Can't clear channel off screen of Sony Trinitron with remote


Press (on your regular remote for your satellite) the t.v. button, then press info, this worked for me and I tried everything. another viewer posted this solution and it worked great! this is not the original remote, it is the satellite remote.

Nov 22, 2007 | Televison & Video

8 Answers

Need codes!!!


1. Go to http://www.urc.philips.com/ 2. choose US URC modles 3. choose US2 4. choose US2-P63S. Really dumb but the owners manual states PH601S but in Philips web site its called US2-P63S -

Sep 07, 2007 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

1,984 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Marvin
Marvin

Level 3 Expert

82208 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...