LNB went bad replaced and unit worked for the people for four days and LNB appeared to of went bad again. This time i measured the voltage to it and it was 33 volts instead of the recommended 13-18volts.
if you take the cover off the receiver and look at the power board you will find evidence of overheating and probably some capacitors that are bulging. it's probably cheaper to buy a new receiver unless you are able to start replacing parts yourself. I found a overheated board recently that came from factory with R30 missing.
Changed from single to twin LNB on a Sky mini dish, can not get a signal. To try to solve the...
(More)
Changed from single to twin LNB on a Sky mini dish, can not get a signal. To try to solve the problem I've replaced both coaxial cables, replaced the twin LNB and returned the Humax FOXSAT-HDR to retailer to check it out. When I fit the satellite finder it shows 80%.
my fortec star is changing channels every day and there are some chnnels i used to watch im not...
(More)
my fortec star is changing channels every day and there are some chnnels i used to watch im not watching any more.it is just say scrambled so i need an assistance please.