Question about JVC AV-48WP30 48" Rear Projection Television

1 Answer

Warped image We were given a AV-48WP34 unit. The owners said they replaced two IPs a couple of weeks ago. Well, when I plugged it in and got a video source to it, the comments about convergence issues were a little off base. The image is distored. The edges and the sides are fine, but the center is crushed down. It resembles a ribbon, kinda. I went threw the convergence adjustments and nothing changed. I doubt this is the issue. Any ideas?

Posted by on

  • tegger Dec 13, 2007

    Here's a picture of what the TV's picture looks like....

  • tegger Dec 14, 2007

    I had the feeling it was something I couldn't do.

    Thanks for your input!!!



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 87 Answers

You definitely have a convergence problem based on the photo you provided. It looks as though someone reset the memory back to an uncorrected state or botched the job replacing the chips. Customer controls will not help you. You need to have a qualified technician address this problem. Good

Posted on Dec 13, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Cracked screen

    wholesale lcd 1024x600 ips 7 - > Wholesale Product
    7" 7Inch 1024*600 1024X600 IPS TFT LCD Dispaly Screen For ... 100% Original LCDScreen Replacement Repairt Part For Freelander PX1 1024X600 IPS Screen ... Original New 7" IPS Tablet Touch Screen Touch Panel Digitizer Glass For ... images for Cracked screen 7 inch panel 1024x600 ips

    More images for Cracked screen 7 inch panel 1024x600 ips

    Cheap screen 1024x600 replacement tablet 7 deals > Computer Hardware & Software > Tablet PC
    7 inch 1024*600 IPS screen Capacitive touch panel nfc android tablet .... Front TouchScreen/Panel Glass Screen Replacement Repair Parts for RCA Tablet 7 ...

    Touch Screen 1024x600 - Alibaba

Jan 01, 2016 | Tablets & eReaders

1 Answer

How to remove the convergence panel from the JVC AV-48WP34 rear projection television

Try Website like You Tube type in convergence repair.Have many videos, people take out convergence board's ,view and find out.

Jul 25, 2010 | JVC AV-48WP30 48" Rear Projection...

1 Answer


Usually when the AV is disconnected all four lights flash red. Cheapest thing to do first is try another AV cord.

However, it's possible that your 360 has been refurbished and the hardware has the chip in a warped position.

If it isn't the AV cable:
You can order a kit for RROD on ebay for about $7.00. Same hardware as what you'd need.
What you have to do is replace the hardware (x clamp) on the video chip the same way it's done when an xbox gets the RROD. reheat the chip so that it connects again by letting it run for about 5-7 minutes with the fan disconnected, turn it off again, wait about 30 seconds and then turn it back on. I fix 360's with this error code at least 3 times a week.

In some cases after doing the clamp trick you will get RROD. No worries, just follow the proccess above and everything will run smoothly.

Jun 02, 2009 | Microsoft Xbox 360 Console

1 Answer

Jvc big screen tv

Good day.

Please check for loose contacts along the cicuitry of your unit. Particularly on the system section.



Aug 17, 2008 | JVC AV-32260 32" TV

1 Answer

Audio but no video when i turn xbox 360 on

hi MC, power off unit unplug av cable from back of xbox.. then power up unit.. after a couple minutes the xbox will shut down.. plug the av cable back in and power up.. Good Luck

Jun 30, 2008 | Microsoft Xbox 360 Console

1 Answer

Green double image

you need to replace both convergence ICs they are both STK392-110 and you can get replacement ICs at the following link and they provide free step by step instructions with pictures so you can do the job yourself. Heres the link.

Jun 30, 2008 | JVC AV-65WP74 Rear Projection Television

6 Answers

Suddenly, the screen shows double images on letters and numbers plus red/greenish like shadows on characters.

Youre convergence Ics need to be replaced. post the model number of your set and I will post the STK number that you need and a link where you can get new replacement ICs

May 25, 2008 | JVC AV-48WP30 48" Rear Projection...

1 Answer

Red and green sloop in tv

Yes it is, the convergence circuit needs repair, couple of large IC`s and possibly 2-3 resistors and you`ll be good as new, BMW Rider

Dec 30, 2007 | Televison & Video

1 Answer

Bowing red lines at top and bottom of screen

Try this, it might be just the thing:

Sep 19, 2007 | JVC AV-48WP30 48" Rear Projection...

Not finding what you are looking for?
JVC AV-48WP30 48" Rear Projection Television Logo

Related Topics:

72 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75025 Answers

Jaime Hernandez

Level 3 Expert

2326 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides