I bought my balance for my son in 2004 and now i wont to use it but i can`t find the drivers dics . I don`t know what happen but for some reason there are no drivers on it. what can i do and how can i get new dics for this system when it`s not made anymore or i can`t seem to find it any where? HELP ME PLEASE!!!!!!!!!!!!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The Driver Information Center (DIC) displays PONTIAC or BUICK for 3 seconds and then the most recently used key fob when it first powers up. The DIC returns to the last display status after displaying the key fob number. The DIC can be displayed in English or French. In order to change between English/French press and hold the Mode button for more than 3 seconds .
There are 2 buttons on the DIC.
The Set button allows options to be reset in the DIC. Options can be reset by depressing and holding the Set button for 3 seconds
i have a 2004 grand prix gt and my cruise control wont come on and i cant dissable the trac control system with the button on my center console. either that or the DIC just isnt displaying that its been deactivated.
Yes you can.What you have to do is press the mode button on the driver info center(DIC).Press and hold the set button for 3 seconds.The DIC will display the zone.This is what part of the country you live in.What state your in.I don`t know what Zone your in so I don`t know if it is in the correct zone or not.They go from i-15.This will determine how accurate your compass will be.If you press set it will change the zones.If it is the correct zone then press the mode set button til the DIC displays calibrate compass.Press set and the DIC will tell you to drive in circles.Find a large empty parking lot to do this.I just crank the steering wheel and keep going in circles.The DIC will say calibrating.When the compass shows direction and temperature it is done calibrating and you can stop driving in circles.Hope this helps.Good luck.If you need to know what Zone your in Just post back with the state you live in and I can tell you the zone.
oh thats the change oil light expect it every 3500 to 4500 miles they glow.. you can usually reset it by holding down the trip button with the car off and then turn the key to the II position where everything lights up
so read me >>>>> Buick Rainier 2004-06, Buick Rendezvous 2002-05 w/o (DIC) Driver Information Center
Turn the ignition to ON without starting the engine. Fully press and release the accelerator pedal three time in five seconds. If the CHANGE OIL SOON’ indicator flashes two times, the system is resetting. Turn the key to OFF, then start the vehicle. If the CHANGE OIL SOON indicator comes on and stays on for five seconds, repeat the procedure. Buick Rainier 2004-05 wI (DIC) Driver Information Center
The DIC display is located on the instrument panel cluster above the steering wheel. The DIG buttons are located on the steering wheel. Press button with the gas pump symbol to display engine oil life. Press button with the arrow symbol to reset engine oil life display. Buick Rendezvous 2002-06 wI (DIC) Driver Information Center
To reset Service Reminder Indicator, turn ignition on with engine not running. Press the MODE button until DIC reads oil life left hold SET to reset. Press and hold the SET button until 100% is displayed. You will hear three chimes and the change oil message will go out. If the CHANGE ENGINE OIL’ message comes back on when the vehicle is started, the engine oil life system has not reset. Repeat the procedure.
Have you driven the vehicle over 45 mph.? If not, drive 5 miles above 45mph and the light will reset. You can also clear clear pressure reading by reseting through the DIC, mode and set buttons. Owners manual will explain use of the DIC ( Driver Information Center) Good luck, let me know. Regards,