Question about Whirlpool GH7145XF Microwave Oven

1 Answer

Microwave plmv169dcd Microwave worked fine yesterday. Tried to use in the morning power was on but the buttons would not work. Pressed really hard finally took but now will not respond w/ the buttons

Posted by on

  • mobey Dec 11, 2007

    Afraid maybe steam from boiling water contributed.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Whirlpool Master
  • 9,098 Answers

You may be right.

The hood fan should always be on whenever you're cooking on the stovetop.

If it does not dry out over time, it may need to be manually dried or blown out.

Replacing the keypad is generally not too hard do-it-yourself job.

If you or a friend decide to work on it, we have *critical* safety, disassembly, and troubleshooting info at our site, and our link is at our listing here on FixYa: http://tinyurl.com/yzjozk

You can find helpful exploded view diagrams and order parts by entering your full model number here: http://tinyurl.com/gv383

If you need more detailed help, please feel free to follow up directly via the first link.

We're happy to help and we appreciate your thoughtful rating of our answer.

Posted on Dec 13, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why Kenmore microwave oven (model 80089700) start/enter button not working while all other buttons works fine?


Safety system locking out the start switch. Door not closed, mode and timer not set etc.

Apr 10, 2017 | Kenmore Microwave Ovens

1 Answer

Yesterday the microwave was working fine, this morning nothing at all...No power at all. I have checked the circuit breaker and everything is fine. The oven below it is on the same breaker and it works...


it sounds like the internal fuse has blown. if your handy, it can be done , however,,MAKE SURETO
DISCONNECT THE POWER SOURCE BEFORE BEGINNING. if your not 100% comfortable
have a trained technition service the unit...

Nov 20, 2010 | Whirlpool GH7208XR Convection / Microwave...

1 Answer

Frigidaire micro plmv169dcd not working


test it with a meter it has a small wire inside and, sometimes can not be visually checked

May 28, 2009 | Frigidaire PLMV169DC Microwave Oven

1 Answer

Control pad does not repond


hi

i think the timer has to be reset,,and make a hard reset..
than k you............

Mar 06, 2009 | Frigidaire PLMV169DC Microwave Oven

1 Answer

Frigidere PLMV169


the internal fuse has blown, if your capable undo the screws on the casing and the check all the fuses

Jan 31, 2009 | Frigidaire PLMV169DC Microwave Oven

2 Answers

Frigidere PLMV169DCD


You most likely had a power surge and blew a fuse. First unplug the unit,then remove the top grill. There will either be one screw on top of the control pad or 2 on the left side. open the control panel and look for a fuse that has a ceramic center and replace it with a 20 amp one. You can find these at the hardware store

Jan 31, 2009 | Frigidaire PLMV169DC Microwave Oven

1 Answer

The touchpad on my microwave has quit working.


possibly a stuck button which would mean a replacement pad, do the buttons bleep when you push them do some work and others dont its quite common normally its the start button or the cancel which goes(due to constant pushing) and it causes the error alternatively its a possible logic board fault which is far more expensive to replace!

Nov 12, 2008 | Microwave Ovens

1 Answer

Microwave has no power


HELLO I BELEIVE THAT YOU HAVE A BLOWN FUSE, OPEN THE MICROWAVE AND LOOK FOR A WHITE FUSE, NORMALLY IS ABOUT 250V/15A TRY TO GET THE SAME ONE AT RADIO SHACK

GOOD LUCK

CAYPIANAN@YAHOO.COM

Oct 20, 2008 | Kenmore 80809 Microwave Oven

Not finding what you are looking for?
Whirlpool GH7145XF Microwave Oven Logo

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9098 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Chuck

Level 2 Expert

228 Answers

Are you a Whirlpool Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...