Like others have mentioned on theirs, my display is also fading...most characters are missing. This makes it impossible to do further button programming of the phone.
I bought new batteries for both handsets; but a fresh battery did not help the situation.
Is this faulty circuitry? What can be done to solve this ongoing issue?
I patiently await your intelligent response!
Comments:
Sep 15, 2009
- Thanks for taking your time taman1!
I tryed what you suggested on both phones and it had no effect on the display. Any other suggestions would be much appreciated?
I have seen this problem on other equipment with LCD screens. The connection between the LDC screen and the circuit board is an elastomeric connector. To see if this might be the problem, squeeze the phone along each edge of the LCD screen (front to back) and see if you can get the display to come back or get any better. If so, the contacting area on the circuit board needs cleaning.
My phone has no dial tone. All the lights and information is normal, and the answering machine base...
(More)
My phone has no dial tone. All the lights and information is normal, and the answering machine base appears to be normal, but when you turn on either of the phones, there's no dial tone, and when someone calls the house, the answering machine never kicks in. Help!!
Phone charging light on base is red but phone shows low battery. Sometimes phone on base works,...
(More)
Phone charging light on base is red but phone shows low battery. Sometimes phone on base works, other times it is dead when I press the "talk" button to place a call or answer one. Backlights on both phones on base and twin unit are blinking on and off. Both Units are plugged in and have power.
The phone (Model 28112 Series) will not ring. No it is not the Do Not Disturb Button. The ringer...
(More)
The phone (Model 28112 Series) will not ring. No it is not the Do Not Disturb Button. The ringer tone is on 1-high. I intermintently get NO DATA or INCOMPLETE DATA in the display window. Why? How do I resolve the no ringing problem?
I have the GE 28112EE2 1.9 cordless phones. There's a base and two extra phones. Since I changed...
(More)
I have the GE 28112EE2 1.9 cordless phones. There's a base and two extra phones. Since I changed to ATT uverse, my caller ID rarely works. It just says "Incomplete data." Att was no help.