Question about SanDisk 1GB Cruzer Titanium USB Flash Drive (413072) Hard Drive

2 Answers

Usb ports My usb ports are not working....can you help me!...we plug in ipods...cameras...anything and won't pop up....what do I do?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 20 answers of more than 400 characters.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 98 Answers
Re: usb ports

Your USB ports on your computer are plug and play. If you have issues with your USB port, it is port related, driver related or device related. The following solutions will help you identify the problem to resolve your USB port issues.
To Identify a Working USB Port
Begin troubleshooting your USB ports by checking Device Manager to see if your USB ports or hubs are working properly.

  1. Click the Start button. ClickControl Panel.
  2. ClickSystem and Maintenance.
  3. ClickDevice Manager.
  4. Double-clickUniversal Serial Bus controllersand check to see if all your USB ports, hubs and controllers are functioning correctly. Any devices not functioning will have a yellow exclamation mark in front of them.
  5. If Device Manager shows any USB ports, hubs or controllers are not functioning, check for updated drivers.

To Update the USB Port Driver

An out-of-date BIOS driver can create issues with your system recognizing the USB port.
  • Watch a Video on Steps to Update Bios on Your Computer.
    1. When the update process is complete, your computer will restart again to load the operating system with the new driver version installed.

Posted on Jan 05, 2015

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert that has over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 317 Answers
Re: usb ports

Make sure that USB ports are enabled in your PC.
Do you have more information or questions?
The more information you provide to us, the better we can help.


Posted on Dec 11, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Hitachi xl1000- windows won't recognize it and computer wants me to format the drive. i need help.

Try plugging the USB drive into another computer.
If it does not work then try this.
Recuva (pronounced "recover") is a freeware Windows utility to restore files that have been accidentally deleted from your computer. This includes files emptied from the Recycle bin as well as images and other files that have been deleted by user error from digital camera memory cards or MP3 players. It will even bring back files that have been deleted from your iPod, or by bugs, crashes and viruses!
  • Put the memory card into an USB card reader and plug it into the USB port in your computer, then run the Recuva program.
  • Simple to use interface - just click 'Scan' and choose the files you want to recover
  • Easy to use filter for results based on file name/type
  • Simple Windows like interface with List and Tree view
  • Can be run from a USB thumb drive
  • Restores all types of files, office documents, images, video, music, email, anything.
  • Supports FAT12, FAT16, FAT32, exFAT, NTFS, NTFS5 , NTFS + EFS file systems
  • Restores files from removable media (SmartMedia, Secure Digital, MemoryStick, Digital cameras, Floppy disks, Jazz Disks, Sony Memory Sticks, Compact Flash cards, Smart Media Cards, Secure Digital Cards, etc.)
  • Restores files from external ZIP drives, Firewire and USB Hard drives
  • It's fast, tiny and takes seconds to run!
Go to these WEB sites to down Recuva

Mar 15, 2013 | Hard Drives

1 Answer

I bought a brand new fantom drive externl hard drive used it once and now it wont show up when i plug it into a usb port

Try to plug the external hard drive to a different port. if its not working try to use other usb device like ipod, or thumb drive and if the other usb device works it means the problem is the external hard drive it self. If the problem still the same the problem is the usb ports probably the motherbaord

Sep 03, 2011 | Fantom Hard Drives

1 Answer

Computer not recognizing MyBook when plugged in

Have a look at this article on external hard disk troubleshooting. Could be that you need to delete the USB root hub devices in the Device Manager to force Windows to recognize the device.

Jun 24, 2010 | Western Digital 320GB MyBook External USB...

3 Answers

External HD not recognizing USB ports as being Hi-speed ports

I have the same issue. I have 4 Simpletech Signature 250GB drives. They all worked fine at first. After about six months two of them started connecting at USB 1 speeds. It occurs on 4 different computers!!! The post about it being the computer assumes is wrong. How can it work fine for six months and then suddenly change. Also it occurs on different computers. I have submitted a tech support request with simpletech and will post the results.

Jun 14, 2009 | SimpleTech Signature Mini 160GB External...

2 Answers

Need help with western digital wd3200me passport

if it came with a driver disk or an install disk then try running that before hooking up your harddrive

Jun 01, 2009 | Western Digital Elements powered by WD 320...

2 Answers

Need help with western digital wd3200me passport

I bought the same product, I noticed that connecting the device to the USB ports at the back of the PC body and using shorter cable solved the problem, try each of the ports at the back of the PC.

Jan 10, 2009 | Hard Drives

2 Answers

Usb not recognized when I put scan disk in port

do 1 thing plug it on a other PC or on a mac and see what happens !!

then format the volume..
hope this helped...!!

Feb 28, 2008 | SanDisk 1GB Cruzer Titanium USB Flash...

1 Answer

SanDisk not recognized by computer

Follow these steps:
  1. Go to START > Right-click My Computer > PROPERTIES
  2. On the tabs, click Hardware > DEVICE MANAGER
  3. Press the + sign next to the Universal Serial Bus controllers.
  4. Doubble-click the first one
  5. When the new window comes up, click Drvers from the tabs, and click "uninstall"
  6. Repeat step 5 for all devices
  7. Restart your computer.
After your computer restarts, plug in your flash drive and it should work.

If that doesn't work, then the USB ports on your computer are dead. You can try to get new USB hardware at a computer store to plug into your computer (THIS IS NOT THE SAME AS A USB HUB!)

Feb 11, 2008 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

Hubs don't work on LaCie minin 250 GB Hard Drive

there is not enough power coming through ports each device re-quires 1-5 volts to run and if your mac has not got enough power to boot all devices then sadly all things pluged into will not reconise and with mac the os is not properly designed for it now if you got yourself an external usb 2.0 hub powered then yes all devices will be seen in mac windows firewire is unsafe at moment for this to happen ask them what system they had had configuration on. hope this has helped

Apr 08, 2007 | LaCie mini (300998U) 250 GB Hard Drive

Not finding what you are looking for?
SanDisk 1GB Cruzer Titanium USB Flash Drive (413072) Hard Drive Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top SanDisk Hard Drives Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

281 Answers


Level 3 Expert

2598 Answers

Are you a SanDisk Hard Drive Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides