Question about Berkeley Forge G-PH001PSS Open Flame Patio Heater
I need to order some replacement parts for my Berkley patio heater. Do you have a phone number where I cn find them?
You need to remove the covers from the unit and blow out the gas lines with compressed air. If you can remove the gas lines blow out the lines and what they connect to like the pilot light and main feed line to the burner. Usually they gunk up with use and just need to be blown out with compressed air to clear the lines again. Maybe you have some dirt or foreign object from your gas tank which has clogged the line. Also check the igniter electric lines as well and make sure everything is connected properly. Especially make sure you tighten the gas lines you remove. Hope this helps.
Posted on Dec 22, 2007
THe thermocouple either has 2 wires or a coppr tube going to the gas valve. They can be bought at a good hardware store or a plumbing supply. The length of the wires or copper tube will be the determining factor as to which one you need. As these thermocouples, when heated generate a small electric charge tha keeps the gas valve open. Should cost no more than $10-15 USD
Posted on Oct 10, 2009
SOURCE: patio heater replacement part
Would this one work?
Posted on Jan 11, 2010
Tips for a great answer:
May 16, 2014 | Stainless Patio Heaters - Steel Deluxe...
May 12, 2014 | Williams 2509612 Ceramic Mid-Size Heater
Jan 29, 2010 | Endless Summer 233000 Open Flame Patio...
Oct 10, 2009 | Berkeley Forge G-PH001PSS Open Flame Patio...
Jul 01, 2009 | Coleman (5040B750) Patio Heater
Oct 19, 2007 | Endless Summer gwt501a Open Flame Patio...
1,733 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: