J2 error on xerox xd 100 copier - Office Equipment & Supplies

http://download.support.xerox.com/pub/docs/XD155df/userdocs/any-os/en/newxd.pdf

Found old post for diffrent printer see if this info helps.
Drums may worj the same even though diffrent models.





Problem with the Xerox Printers Xerox XD130DF J2 error replace
By lgrey on Jun 20, 2008
Xerox XD130DF J2 error replace drum Best Solution posted 3 years ago
rytech uk

• Rank: Wiz
• Rating: 80%, 98 Votes

Im presuming that your have replaced the drum??

if so :
Remove the new drum.
On the front of that drum, there is a green cover. Take it off and what has happened is the flag on the gear had dropped in shipping.
You will see a flag like piece of plastic on one of the gears, reset it to up and somewhat to the right.
Then put the green cover back on
That flag has to be in the up position when new. It passes down and actuates a drum reset switch on the machine.
When that is back in the up position. re insert the drum and on the first revolution it will turn on the switch.

J2 means the drum unit has reached the end of its life. You need to replace it.
Staples . office max etc normally has them in stock.
If not google a company called The Parts Drop.
They will have what you need also.

All this means is that your toner is getting low and advising you before it is out completly the it needs replacing.

Hello sir; After replaced drum need to reset the counter,the procedure as follow;
1, press "clear", "Exposure","clear" "exposure" keys.
2, enter 24, press print key.
it should remove J2.

You need a new drum cartridge.

J2 is the drum cartridge, or some people call it print cartridge has reached the end of its life.
J1 is the toner cartridge, J2 is the drum.

J2 means the drum cartridge needs replaced.
Its next to the toner.

J2 means your drum needs to be replaced. The life of the drum is expired.

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;}H4 is a power failure code. To reset the errorplease press in the following order:

CLR - AUTO - CLR - AUTO
(this puts the unit in tech mode).

Enter 14 (as if asking for 14 copies)

Press "PRINT"

Your unit should reset itself and start working