Question about One For All URC-3021 Remote Control

1 Answer

Charter cable box

Need a list codes for charter box and how to program remote

Posted by on

  • 8 more comments 
  • deboomer Dec 12, 2007

    i need a list of codes starting on page 18 from the manufacturer' book i lost my book form my remote urc-3021 i will just try all the codes

  • Anonymous Oct 13, 2008

    need code for new tv

  • twright47 Oct 27, 2008

    code for rca television

  • m130 Dec 25, 2008

    I have the remote that came with my charter DVR. I have not book or model on the device. I would like to get it working for my sony blueray and Samsung series 6 630 tv on one remote.

    help

  • Anonymous Jan 04, 2009

    hey i have problem

  • aburles Apr 12, 2009

    was moving the remote and I must have hit one of the buttons. Now remote will not power on or off my Philips TV, nor control the volume. The Philips remote will also not work. have unplugged power to both TV, charter cable box as wells as removing batteries from remote. No change. Can only power off and on and do volume with the buttons on the TV.

  • elaine sylvester Apr 16, 2009

    I got a different tv it didn't come with a remote. Do you have the codes so I can use the cable remote to turn tv on & off volume and channels? It does change the channels with the cable box

  • Anonymous Mar 15, 2014

    Can a charter cable remote control control a AUVIO sound bar

  • Anonymous Mar 26, 2014

    charter remote

  • Anonymous Mar 30, 2014

    I have a hitahi model L32BD304 and charter cable remote but the codes charter provides don't operate the tv

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 259 Answers

Could not find box on list but here is your product manual:
http://www.ofausa.com/remote_manual/CTGAE3P%203021%20anual%20booklet.pdf

PROGRAMMING DEVICE CONTROL
The One For All 3 Device Universal Remote Control is preprogrammed at
the factory to operate an RCA TV, a Toshiba DVD player, and a Motorola
cable box.To control devices other than the default brands,perform the following
steps; otherwise skip this section:
1. Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insert media (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
2. On the remote control,press a device key once (i.e., DVD/VCR,
CBL/SAT,or TV).
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press DVD/VCR once.After programming
a VCR Combo device, you will be able to control channel selection,
volume, and VCR functions.
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD/VCR once.After programming
a DVD Combo device, you will be able to control channel
selection, volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
3. Press and hold SET until the LED (red light) blinks twice,
then release SET.
4. Use the Manufacturer’s Codes (starting on page 18) to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again.
5. Aim the remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn’t work, try
Searching For Your Code on next page.
NOTE: If the device does not have a POWER key, press PLAY.
6. Repeat steps 1 through 5 for each device you want to control.
For future reference,write down each working device
code in the following boxes:

Posted on Dec 11, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have jvc tv, lost remote, have cox remote turns tv on but doesn't change channels don't have cable just tv antenna


Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality
Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window" to get gathered related posts.

Sep 25, 2016 | Charter Cable Cox Cable URC-8820-CISCO...

1 Answer

How do I program a charter remote to a rca converter box


Charter 1060BC2 and 1062BC3 - Setup

www.urcsupport.com/html.php?page_id=762
SETUP. The Charter 1060BC2 and 1060BC03 Remote Controls are preprogrammed to operate the cable box (converter) provided by your cable system, an RCA TV, a Toshiba DVD player, and a Pioneer audio receiver. To control devices other than the default brands, perform the following steps; otherwise skip this section.

Program the Digital Cable Remote Control

mscharter.custhelp.com/app/.../program-the-digital-cable-remote-control
Dec 10, 2013 - Highlight or write down the codes and device you wish to programbefore moving on to Step 2. On the remote control, press a device key once (i.e., AUX, DVD , AUD, TV or CBL); it will blink once. Then, press and hold SETUP until the selected mode key blinks twice, then release SETUP.

Charter.net Charter Remote Controls - 1060BC2/1060BC3

www.charter.net/.../charter-remote-controls-106...

Charter CommunicationsProgramming Codes: Select the manufacturer of your device from the list. The codes will appear beside the list boxes. Not all manufacturer brands listed may be ...

Charter.net Charter Remote Controls - OCAP-4


Jan 21, 2016 | RCA Televison & Video

1 Answer

How do I program my Charter remote to an Element TV?


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by type in the brand name of your device, in the "Search box at the top right of the Home page display" to see the set-up codes to your device, with different brand remote controls.
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.

Dec 15, 2015 | Element ELC-HS321 32 in. LCD TV

1 Answer

Charter remotehow do i program a charter remote to control directv?


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by type in the brand name of your device, in the "Search box at the top right of the Home page display" to see the set-up codes to your device, with different brand remote controls.

Nov 08, 2015 | Charter Cable Cox Cable URC-8820-CISCO...

1 Answer

What is the remote code that a charter OCAP uses to control a TruTech 20000-D TV/DVD player?


If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Pull up older posts.
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/

Aug 31, 2014 | Charter Ltd Ocap-4 C4000 & S4000 4-device...

1 Answer

How do i set my time waner cable remote to my tv


Programming procedure is too much to type in here by this window, and is not practical. If you wish to get details; check the site linked here. It have set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" or "Magazine" view. It will make surf easier.
http://electrohelponline.blogspot.com/

Apr 22, 2014 | Charter Cable Time Warner Cable Box...

1 Answer

I HAVE A ZENITH MANUFACTURER PFBRUARY 1998 , SERIAL #V08871551. I NEED THE REMOTE CODE TO PROGRAM MY CHARTER TV REMOTE


027,022,018,046,073,082 are the codes to check. If you wish to get more details, check this site. Pull up older posts there. Setup code list and setup proceedings to many popular brand remote controls are given. Three digit, four digit, five digits and two-digit code list are there. Check the site with patience. Surely you'll get a solution to your problem. Search the site by 'Timeslide' option. It will make search easy. Or, type in the brand name to your device into its search box, and press "Enter."

Mar 27, 2013 | Televison & Video

1 Answer

Charter remote will not change channels--I have put in tv code but still nothing--noting on the remote will work except to power the tv on


You will need to program it to your cable box to change channels. Remember, the channels in your tv are coming from your box, so if the remote can't control the box, you won't be able to change channels. Call charter for help on programming remote to cable box.

Jan 22, 2011 | Televison & Video

2 Answers

Just received a new moxi remote because i was having trouble with my old one. My moxi box is a silver motorola box that says broadband media center. my old remote says charter digital on the bottom and...


Do you know what model MOXI box you have? The new remotes weren't programmed to the MOXI 3012 box. If you have the Moxi MP12, BMC9012, BMC 9012F, BMC 9022 you will need to program the remote to the box.

1. Turn on the Moxi STB.
2. Press and hold the MOXI and OK buttons on the remote until the red LED at the top of the remote blinks twice.
3. After the red LED has blinked twice, release both buttons.
4. Using the numeric buttons on the remote, slowly enter 0, 0, 4. The correct entry of this code will cause the red LED to blink twice.
5. The remote is now programmed to operate the Moxi STB listed above. Go to “Programming the TV”.

Apr 01, 2010 | Televison & Video

Not finding what you are looking for?
One For All URC-3021 Remote Control Logo

4,052 people viewed this question

Ask a Question

Usually answered in minutes!

Top One For All Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75846 Answers

Cindy Wells

Level 3 Expert

5579 Answers

S. Gontko

Level 2 Expert

142 Answers

Are you an One For All Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...