Question about Frigidaire FGF378AC Gas Kitchen Range
Starting the oven is fine, but after a few seconds it shuts itself down. The stove top burners still work, but the broiler does the same thing, ignites then shuts down after a few seconds.
Sl, because it't happening to both broil and bake the first thing I would suspect is the temperature probe. You should ohm it out. You can do this either at the board or at the harness connection in back. For the board, remove the back panel, there should be a 8 pin connector to the left of 3 relays. On the harness measure the resistance of the wires going to pins 1 and 2. On the shemantic it shows them being the 2 on the bottom. Should read around 1100 ohms at room temp. If you cant get a good reading on it there, Remove the probe from the inside oven, remove the screws and pull it out until the harness connector comes through, disconnect it and ohm it out from there. I don't think that both ignitors would fail at the same time so Im leaning toward the probe. Catriver.
Posted on Dec 11, 2007
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Sep 13, 2014 | Frigidaire FFGF3005MW 30" Freestanding...
Dec 01, 2012 | Whirlpool GW395 Gas Kitchen Range
Nov 08, 2009 | Frigidaire GLGFS66AQ Gas Kitchen Range
Sep 26, 2009 | Amana AGDS902 Gas Kitchen Range
Apr 01, 2009 | Maytag MGR5765QDQ CleanDesign Gas Kitchen...
Apr 01, 2009 | GE Profile Spectra JGBP90 Gas Kitchen...
Dec 07, 2008 | Kitchen Ranges
Apr 07, 2008 | Frigidaire FGF378AC Gas Kitchen Range
Jan 18, 2008 | Whirlpool SF367 Gas Kitchen Range
Oct 29, 2012 | Frigidaire FGF378AC Gas Kitchen Range
267 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: