Question about Hotpoint Ultima WF860 Front Load Washer

2 Answers

How do I remove the top from my Hotpoint Utima

How do I remove the top / outer casing from my Hotpoint Utima washer / dryer machine so that I can find gthe source o a leak . I have an occasional leak on the rinse cycle when doing a Hot Wash which does not happen on any other type of wash programme. I've looked underneath the machine but cannot see any water stains.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hotpoint Master
  • 744 Answers

Normally two screws at the back This video will show you how to find that leak on any front loading washing machine
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.
And don't forget to like us on facebook

Posted on Aug 05, 2013

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I dont really think that can or let an expert engeneer do it.

Posted on Sep 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you tell me where the brushes are located in a Hotpoint First Edition WMA 20 please


Removed lower rear panel of washer.
Undo 2 screws securing motor to outer drum casing, unplug motor lead and remove motor, brushes ar e located at the end of the motor furthest away from the motor pulley.

Aug 06, 2010 | Hotpoint First Edition WMA20 Front Load...

1 Answer

Wd540p hotpoint washer dryer is not drying clothes. Any ideas?


first of all, REMOVE PLUG from the wall socket.. remove the top lid off the machine and you will see the dryer element housing element in front of you. you will see thermostats on the housing, do a continuity test on these, replacing them will solve your problem. NEVER bypass these under ANY cicumstances

Oct 19, 2009 | Hotpoint Aquarius WD640 Front Load...

2 Answers

How do I remove and then replace a new door seal on my hotpoint WD420 washer / dryer


First switch off electrics , Remove door interlock , leave wires on .remove soap dispenser,remove front panel with controls 3 screws top of machine 3 screws bottom remove front casing you can now see door boot. remove sring note how boot came off refit is oposit to this noting top / bottom of seal ..Hope this some help-

Oct 03, 2009 | Hotpoint Ariston Aquarius WD420 Front Load...

1 Answer

Hotpoint Utima WD860


The error code F13 is indicating dryer thermistor open or short circuit.
This is located in the top of m/c, and it looks something like a thermostat wired in series with the element, if there is more than one, then it is advisable to replace both..
Plz rate my solution.
Thanks.

Jan 05, 2009 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Bearing. replacement ,Aquarius wma30s.


This one comes out through the front.Remove screws behind soap drawer and take off control panel then take out screws at top and bottom of front panel. take seal off door then lift front to remove. the rest you obviously know.
thanks for using Fixya

Dec 15, 2008 | Hotpoint Aquarius WMA42 Front Load Washer

1 Answer

Removal of door seal on hotpoint washer drier wd420


You will achieve nothing by removing the door seal .
Depending what is in there, better to leave alone and trust it will find its way into the filter.
If it is anything substantial then it involves major work.

Dec 14, 2008 | Hotpoint Aquarius WD640 Front Load...

1 Answer

No heat on tumble dry programme. Display flashed F 13.


You need to replace the heating element for the dryer which is positioned on top of the outer drum. Remove the top cover of the machine and locate the heater.

Nov 01, 2007 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Washer dryer error code 'check outlet pipe'


the outer drum could have dropped ]it might be a shock gone or top spring] close ire bye

Oct 11, 2007 | Hotpoint Aquarius WD640 Front Load...

1 Answer

Hotpoint wd63


take door off. outer porthole is just clipped into frame. gently prize out with a small screwdriver

Mar 04, 2007 | Hotpoint Aquarius WD63 Front Load...

Not finding what you are looking for?
Hotpoint Ultima WF860 Front Load Washer Logo

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

puggy666

Level 1 Expert

48 Answers

ptpumpman

Level 3 Expert

407 Answers

Cindy Wells

Level 3 Expert

5188 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...