Question about Kohler Toilet - One Piece with Ingenium Flushing System - San Raphael by

1 Answer

K3367 one pice toilet harmonic vibration

I have a Kohler 3367 one piece (low profile) toilet. The toilet began spraying water out of the seam between the lid and the one piece base. I bent the fill assembly slightly downward to move the spray from hitting the seam.
This has apparently created a loud harmonic vibration in the filler pipe with each flush. The harmonic vibration remians even after I moved the fill valve back to it's original position.

Any recommendations?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 49 Answers

Check your water preasure. it sounds like it's to high and you should adjust your prv

Posted on Sep 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you stop a kohler toilet from spraying water inside of tank lid


There should be a small hose that is spraying the water. That hose should be put inside the overflow tube and heald in place with a clip or put into a small hole on top of the tube. Only put the tube in just enough to hold it in place. If it is spraying from anywhere else you need to replace or repair the ballcock.

Nov 13, 2014 | Kohler - Toilet - Two-piece - Highline -...

1 Answer

Water in bowl. water level almost below where bowl saris to widen! , Kohler cimmarron - Toilet tank is full, all water flushes out of tank when flushed it's been this way since we installed it


If I understand correctly, your water level inside the bowl is 3 or 4 inches from the top of toilet seat?
Sounds peculiar to have that water level since you would get splashing etc.
That is not sanitary, and would be a code violation.
Look at side profile of tank.
Look at porcelain behind bowl and you can see outline of "s trap."
This is the internal trap that each toilet has built in.
Purpose of trap is to a) set water level inside bowl and b) just like a sink trap, seal pipe from sewer air from entering home.
Photo shows trap on sample toilet, with line showing approximate level of water inside bowl.
Since photo is at an angle, the line appears to go downward instead of level. Again the line is approximation, and photo intended to show where you can look on your toilet.
Your tank should have similar s-trap feature. From the feature on your tank, you can see what level water is intended to be inside bowl.
Some more expensive tanks, outline of s-trap is not apparent.
geno_3245_233.jpg
If the water level is so high that you experience unsanitary conditions, this is a code violation, and toilet should be replaced.

Quick web search turned up Kohler contact page: http://www.us.kohler.com/general/contact.jsp
KOHLER Customer Care at

Phone: 1-800-4KOHLER (1-800-456-4537)
Hours: 8:00 AM - 5:00 PM (Central Time) Monday to Friday
You can refer Kohler to this link on Fixya so they can clearly understand issue.

Jan 09, 2011 | Kohler - Toilet - Two-piece - Highline -...

1 Answer

CANNOT UNTIGHTEN EITHER TOILET SEAT SCREWS - SO TIGHT WILL STRIP WITH ANY MORE PRESSURE. STRAIGHT SLOT - . ON A LOW PROFILE KOHLER . THERE IS NOT ACCESS TO THE OTHER END OF SCREWS EVERYTHING IS...


screws can be accessed thru tank..take a hacksaw blade only n cut from above (careful not to scratch where can be seen)..nuts will fall in tank..will have to reach for them thru tank.

Nov 19, 2010 | Kohler - Toilet - One-piece - Santa Rosa -...

1 Answer

I have the Kohler model 703 one piece toilet. It runs once about every ten minutes. It sounds just like a flush but nothing happens in the bowl. Any ideas?


Something is leaking. Your description sounds like tank water is slowly leaking and then the tank refills. You really need to use Kohler brand parts, as others pieces seem to not work well.

Sep 20, 2010 | Kohler Toilet - One Piece with Ingenium...

1 Answer

Water spits out of toilet bowl when toilet is flushed


If your referring to the tank, take the lid off and make sure the small tube is connected from the filler valve to the top of the overflow tube. If that's connected properly, flush the toilet with the tank top off and locate the source of the spray. A small crack in the fill valve can cause a significant spray.

Jul 09, 2010 | Kohler - Toilet - One-piece - Santa Rosa -...

1 Answer

Plastic piece at top of tank spraying water after flushing all out of tank and everywhere! How do I repair or what can I do??


look at the bottom of the system there will be a small plastic U-bend about 1.5 inch long by about 1/2 inch widethat has dropped off silply insert it into the top of the system where the water is coming out of and push firmly.

Apr 24, 2010 | Kohler Toilet - One Piece with Ingenium...

3 Answers

Kohler one-piece has no flushing power


Hi
try to increase the amount of water for each flush .

Jul 17, 2009 | Kohler Toilet - One Piece with Ingenium...

1 Answer

Toilet tank fill valve sprays water towards lid


Hi bpmorr1,

It may be that the fill tube has come disconnected . It runs from the top of the fill valve to the overflow. The overflow is the tube that runs up the middle of the tank. The fill tube runs from the top of the fill valve to the top of the overflow tube. Kohler has a little clip that can sometimes come undone and cause spraying.


If that doesn't do it, turn the water off to the toilet and take off the tank lid. Partially open valve ( Slowly). Locate where spray is coming from. If it is in the area on top of the fill valve then yes, buy anew one. ( Fluidmaster )

Please rate this response and good luck, Phil

Dec 26, 2008 | Kohler K-3360-G Revival One-Piece Toilet...

3 Answers

Kohler one piece part number 1013282


Hi kayela,

I'm Harvey the Master Plumber.

Your question is: Just replace the fill valve for kohler one piece andthe fill valve sprays a stream of water out of the top and onto the undersideof the lid is that supposed to happen?

For some reason I can't seem to get the picture up. Nevertheless, the answer is no, it should not be leaking. Did you take a picture of the original before removal? Do you still have the original? Look carefully at the diference between the two. Make sure it's an exact duplicate and isn't missing parts. These one piece toilet parts are expensive but the suplier sometimes makes mistakes. You can only solve this problem if they match.

Feel free contact me again!
Please give me a rating here at fixya.com before you sign off
Thank you,
Harvey your Master Plumber

Sep 28, 2008 | Home

Not finding what you are looking for?
Kohler Toilet - One Piece with Ingenium Flushing System - San Raphael by Logo

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kohler Home Experts

Donni Steen

Level 3 Expert

659 Answers

john h

Level 3 Expert

12744 Answers

Tim Whalen

Level 3 Expert

3074 Answers

Are you a Kohler Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...