Question about D-Link RangeBooster G WBR-2310 Wireless Router (WBR2310)
Some support information for your router can be found at dlink site:
type wbr and select 2310,
Product info at this site contains manual:
Choose Support Resources tab and then select whether or not you have RevB (it will guide you how you can tell).
You can then download the Product Manual. In the non-RevB manual, what to do with SSID is described on p25, showing where in the set-up interface to enter it. The RevB manual will likely be similar, depending on your exact model.
If you don't know how to access the device's settings, send back a comment and I will assist you further.
Posted on Sep 13, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
What is the brand of your wireless router? Just make sure the SSID (signal's name) is configured on the wireless setting of your printer. They should have the same SSID configured. If the correct SSID is already configured on the printer's wireless settings, try to change the channel on your wireless router. Use channel 11. You can also try to do a power cycle. Turn off your wireless router and printer for about 1 minute. Power on router first, wait for the lights to stop blinking, then power on your printer.
Posted on Oct 14, 2008
well i saw the problem u r facing
and the only soution for it is the upgradation of the firmware ....
i was facing the same one on my router and it got corrected ....
otherwise u can call the customer care no of the the routers company and they will give u the replacement
Posted on Oct 23, 2008
You'll probably need to log in to the router with a computer. Usually opening your internet browser, and typing http://192.168.0.1 or http://192.168.1.1 will bring up a router config page. You may need to do an internet search to find the default password if you haven't changed it. Once in, you'll find a wireless config page which will have all of this info.
Posted on Dec 21, 2008
Log in to the management console, if the settings have changed you will have to reset the router to the most basic settings then start it up again, do this by turning to the back of the router, most routers have a pin sized hole in the back, stick a pin down that hole and hold it steadily pushed down for 5 to 10 seconds, release and wait 5 to 10 seconds and try again, hope this helps..
Posted on Oct 25, 2010
Tips for a great answer:
Jan 01, 2011 | Computers & Internet
If you need more help come back.Post /
thumbs / testimonial are
Nov 23, 2010 | Linksys WCG200 Router
Aug 23, 2010 | Computers & Internet
Aug 11, 2010 | Dell TrueMobile 2300 Wireless Router...
Aug 12, 2009 | Office Equipment & Supplies
Apr 08, 2009 | SMC Barricade 7004VWBR Wireless Router
Jan 11, 2009 | Linksys Wireless-G WRT54G Router
Jan 03, 2009 | Linksys BEFSR41 Cable/DSL Router W/4 Port...
Sep 14, 2008 | Computers & Internet
320 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: