What is error code h55 in panasonic floor mounted ac E28NFQ?

The F95 error code appears on Panasonic inverter air conditioners due to the overheating of the outdoor coil. It is basically, protection against the outdoor high-pressure rise. This problem usually occurs due to issues relating to blockages, a dirty condenser coil, cool mode, or low gas.

How To Solve F95 Panasonic Error Code? - Aircon Servicing

and more information and videos

https://www.google.com/search?q=F95+error+on+Panasonic+professional+AC

..

https://www.youtube.com/watch?v=C4W_XjX2Dsk

E5 - Error Code
E5 Error code indicates that the water collection tank is full. To drain the water collection tank completely, leave the bottom drain cap off long enough to allow any residual water to drain out. Once the water tank is completely drained and no more water flows out, reinstall the cap.

https://www.lg.com/us/support/help-library/error-codes-room-air-conditioner-CT10000014-1432829295501

Any one of the following might cause that code,
AC drive board (ACDB)
• Printer control board
(PRCB)
• 1st transfer pressure
release motor (M19)
• 1st transfer HP sensor
(PS15

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Hi Mohammad.
There is an error in the high-voltage output to the separation charging assembly.
An error (leakage) to the high-voltage output to the separation charging assembly is detected.
Check if the transfer charging assembly and separation charging assembly are mounted properly. - Check if the connector (J722, J723, J730, J734) of the HV-DC PCB and the connector (J741, J742) of the HV-AC PCB are mounted properly. - Replace the HV-AC PCB. - Replace the separation charging assembly. - Replace the pre-transfer charging assembly. Canon iR105 Error Codes List page 3 from 9

cara menangani erorr P5 pada ac floor standing changhong????trims infonya

gimana cara menanggulangi Code Error F7 , AC Standing Floor Changhong

you will nee to check every device on your computer
all electrical and data connection points at every device

motherboard to hard drive leads make sure secure dust free connections
make sure your ram modules are dust free and securely seated

the same with cmos battery though some motherboards cmos batteries are soldered in
check cpu central processing unit for dust free sure seating and thermal paste

hope this helps