Question about Canon PowerShot A620 Digital Camera

2 Answers

Black screen I have a connon a620 powershot i can review pictures but when i try to take pictures the screen is black.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 428 Answers

Simply right click on the track itself and select send to/DVD-RW or CR-RW depending on the type Compact disc drive you have. Then you will see a notification, "you files to be written to CD." Simply click on it or go to your Compact disc drive on My Computer and click “write these files to CD.” Then follow the screen instructions. IT is that simple. All you need to do is press and release the display button until the screen displays. Usually Canon Powershot cameras have 3 display modes:- colour, black & white, blank. Your camera is set to blank that is why you cannot see any image/screen displays no image. Just press and release the display button until the screen displays. That should do it.

Posted on Sep 13, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Canon Master
  • 4,738 Answers

A stuck shutter is a common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very bright and overexposed, especially when taken outdoors (for shutter stuck open).

To confirm a stuck shutter, put the camera in any mode other than "Auto", and turn the flash OFF (you don't want to blind yourself for the next step). Next look down the lens and take a picture. You should see a tiny flicker in the center of the lens as the shutter opens and closes. If no movement is seen, then you likely have a stuck shutter. If so, please see this link for further info and a simple fix that may help.

Posted on Sep 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon A620 is taking black images/ Can't see images on screen


First try pressing the DISP or DISPLAY button on the back of your camera. If that didn't fix it... A stuck shutter is another common failure mode for digital cameras. The symptoms of a stuck or "sticky" shutter are very similar to CCD image sensor failure. The camera may take black pictures (for shutter stuck closed), or the pictures may be very bright and overexposed, sometimes with lines, especially when taken outdoors (for shutter stuck open). To confirm a stuck shutter, put the camera in any mode other than "Auto", and turn the flash OFF (you don't want to blind yourself for the next step). Next look down the lens and take a picture. You should see a tiny flicker in the center of the lens as the shutter opens and closes. If no movement is seen, then you likely have a stuck shutter. If so, please see this link for further info and a simple fix that may help.

Jul 28, 2010 | Canon PowerShot A620 Digital Camera

3 Answers

My Canon PowerShot A620 has a black screen, any ideas on how I can fix this? I can't even take pictures, all of them come out black


My A620 JUST started doing the same exact thing last night. LCD works, lens works... but something possibly wrong w/the shutter so it won't open.. everything black.

Jan 05, 2010 | Canon PowerShot A620 Digital Camera

1 Answer

Hello the lcd screen on the back of my canon a620 is completely black and will not show what i am taking a picture of. any suggestions?


If the camera shows the menu, it can be two faults - dead CCD or stuck shutter. You should contact local Canon service center.

Tom

Jul 28, 2009 | Canon PowerShot A620 Digital Camera

1 Answer

Screen is black while taking picture.


Think that you accidentally pressed the DISP or DISPLAY button on the back of your camera. This manually turns the LCD display on and off to save batteries. You would then use the optical viewfinder in its place. To turn the screen back on, just press the DISP button one more time.

Jul 25, 2009 | Canon PowerShot A620 Digital Camera

1 Answer

Cannon Powershot A-620 black screen can't review


Did you accidentally press the DISP or DISPLAY button on the back of your camera? This manually turns the screen on and off to save batteries. You would then use the optical viewfinder to take pictures. To turn the screen back on, just press this button one more time.

Jul 23, 2009 | Canon Cameras

2 Answers

Black screen while shooting, but still taking pictures not black


Nonononooooo fotomohamed, he can review just taken pictures on the LCD. The screen is working.

Actually, it sounds like you just accidentally pressed the DISPLAY button on the back of your camera. This manually turns the screen on and off in picture taking mode to save batteries (you would then use optical viewfinder). Just press it once and it should turn back on.

Jun 19, 2009 | Canon PowerShot SD1000 Digital Camera

1 Answer

I had my camera for a couple of years and the lcd screen went black, i can't take new pictures anymore.


If the screen goes black, you can still take pictures. There is no way to fix the black screen, it just blew out.

Jun 16, 2009 | Canon PowerShot A620 Digital Camera

1 Answer

Black LCD screen on canon A620 camera


There is a company in new york that carries a parts for small point& shoot digital cameras, : Camera Repair NYC

May 04, 2009 | Canon PowerShot A620 Digital Camera

3 Answers

Lcd screen is black can't take new pictures


Hi Guys, My A620 is almost out of warranty :-{ and the lcd went blank. Could still take pictures and view them, just couldn't see them on the lcd screen. After looking through all of these trouble shooting pages, someone on another page suggested to reset settings, manual pg 28. Or on the camera switch on, Menu, go into tools scroll down till you reach rest all and ok. Doesn't clear pics already on there, and mine now works fine :-) phew. Good luck xx

Aug 25, 2008 | Canon PowerShot A620 Digital Camera

1 Answer

My PowerShot A620 lens isn't working


Don't even try unless you know what you are doing - you can get a nasty belt off a charged flash capacitor (around 300volts) - the lens is more than likely clogged up with sand, this will wear the sliding tracks in the zoom very quickly and will render it useless.
You can buy new lens assemblies (Colchester Camera Repairs) but the cost will be high, around £80.00 just for the part.

Jan 01, 2008 | Canon PowerShot A620 Digital Camera

Not finding what you are looking for?
Canon PowerShot A620 Digital Camera Logo

308 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

kakima

Level 3 Expert

102366 Answers

TC CAMERA REPAIR.Com...

Level 2 Expert

169 Answers

old marine
old marine

Level 3 Expert

1992 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...