Question about Epiphone Les Paul Studio Electric Guitar

1 Answer

I tripped over my amp chord while it was in, and now my amp wont make any sound at all. any suggestions?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 35 Answers

First, try a different cable. Often in this kind of accident, the connection is broken between the wires in the cable and the plug on the end of the cable. (The cable can often be repaired by soldering the wires back onto the plug.)

If that doesn't help, it's possible the input jack on your amp was damaged. It is a relatively simple job for an amp technician to repair or replace an input jack if this is the problem. Expect about 1 hour of labor and about $10 in parts.

Posted on Sep 13, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Casio LK-100 keyboard is turning off often when chords are played, esp in lower octaves - seems like a short. Where might the short be - way to fix without taking the whole keyboard apart?


Sounds like a lack of power from the external "wall wart" power supply. Is it the correct one that can supply enough current for a chord to be played? (a chord will play more notes at the same time & pull more power from the supply in order to make the sound(s)) If it's the correct power supply or one of the correct current rating check the cable & the connector both at the end of the cable & where it plugs into the keyboard. Perhaps the lead has been tugged accidentally? / Damaged in some way? Turn the volume down a little & see if that helps - that will confirm the power theory :-) Good Luck!

Jan 17, 2017 | Casio Music

1 Answer

What are all the left side controls on an Elegance JC-618 electronic keyboard


Single and Finger,is chords mode.
In Single,by press one key (eg:A) then chords A is heard,and so on.
In Finger,you must press 3 keys.Example: G-B-D,then you heard G chord. D-F#-A is D chord.
In Finger,lets say you press A chord and want to change to C chord by press one key C only,there's nothing change untill you press C-E-G.
Low, is for chords octave low.
Chords Off,no chords can be play,it mean overall full piano mode..
Single,Finger,Low, can be activate with Sync Start button.

Aug 17, 2015 | Music

1 Answer

I have a peavey renown 400 while playing bar chords at 3 to 4 on volume amp will get loud and distorted on its own never shuts off though. but only happens bar chords 7th fret and above.mind baffling


Could be a few things, most simple the Tubes, and or biasing, I have had a few amps that certain notes or chords would cause harmonic distortion within the tubes, and the tubes where good? Another possibility is the output transformer? Sometimes when they are failing the volume varies... hope this helps?

Mar 04, 2015 | Peavey Music

2 Answers

Hi, when I play a chord on my Casio-656 keyboard it sometimes sounds out of tune - if you hit the chord again it plays correctly. Is this a fault or a setting? It seems to be intermittent so that would...


I would check your fingering... You MAY be late in hitting a particular note and the using auto chord... this can cause the problem. Another thing is if notes are hit with different velocity that can affect the sound. Sometimes certain voices have VELOCITY switching which actually changes the voice depending on the velocity you hit a note.

May 19, 2011 | Casio Music

1 Answer

Fuse blew out on my american audio after my girlfriend tripped on the chords, how do i repair it . is there a fuse or a reset button thank you


You are saying the fuse blew out and then asking if there is a fuse??? That makes no sense...

Tripping on cords could do certain things but NOT likely to blow a fuse.

Tripping on cords OFTEN breaks the plugs on the cords or the jacks in the equipment. The power input jacks from those wall transformer power supplies seem to be very vulnerable to this. They often disintegrate OR break loose from the solder on the circuit boards rendering the unit inoperable.

In future, loop the cords through handles so they don't yank the jacks if somebody yanks the cord.

Dec 26, 2010 | American Audio CK 800 MP3 CD PLAYERS SOUND...

1 Answer

Hi my Marshal G15 is making an echoy twang when played loud (& open E chords). does this mean the reverb is broken?


I suspect the vibration when it is loud is vibrating a reverb tank within the unit.

Test this bylistening with headphones and see if you get same sound.

It may be the reverb has a resonance or the cabinet does that is sensitive to your E chords.

The shock mounting of the reverb may have failed to isolate the reverb tank from speaker vibrations... hence the headphone test.

Jan 27, 2010 | Marshall 15 Watt Guitar Amp

2 Answers

My electric guitar wont play with my amp


Yes its probably the wirring but if u look at it
it kinda crazy, so you wont be able to do it on ur own unkess ur a guitar tech so just go to a shop and they will fix it for u, problem is that if it is the wirring it willl have problems, so u might want to replace the WHOLE wirring system... Depending on the guitar u have, FENDER< GIBSON<IBANEZ, CORT, the wiring colors will be different
DONT TRY TO FIX IT URSLEF

Jan 05, 2010 | First Act Music

1 Answer

Casio tonebank ct700 no sound from chords only whilest on fingered chord please advise


More info. If you are chording on the left half of the keyboard, SOMETIMES they allocate or have the option to select a different voice for the part where chords are played. For these, you have to ALSO select a voice for that half of the keyboard. If you don't select a voice, then you would not have anything sounding.

Sep 27, 2009 | Casio Music

Not finding what you are looking for?
Epiphone Les Paul Studio Electric Guitar Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epiphone Music Experts

Robert Graf

Level 2 Expert

238 Answers

Vito Vacirca Jr.

Level 2 Expert

140 Answers

dave nyman

Level 1 Expert

17 Answers

Are you an Epiphone Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...